Simulation of three Dimensional Defect Images in Transmission Electron Microscopy

1976 ◽  
Vol 34 ◽  
pp. 470-471
Author(s):  
W. D. Cooper ◽  
C. S. Hartley ◽  
J. J. Hren
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Three Dimensional ◽  
Crystalline Lattice ◽  
Continuum Models ◽  
Thin Foils ◽  
Transmission Electron ◽  
Microscope Images ◽  
General Computer Program ◽  
General Computer

Interpretation of electron microscope images of crystalline lattice defects can be greatly aided by computer simulation of theoretical contrast from continuum models of such defects in thin foils. Several computer programs exist at the present time, but none are sufficiently general to permit their use as an aid in the identification of the range of defect types encountered in electron microscopy. This paper presents progress in the development of a more general computer program for this purpose which eliminates a number of restrictions contained in other programs. In particular, the program permits a variety of foil geometries and defect types to be simulated.The conventional approximation of non-interacting columns is employed for evaluation of the two-beam dynamical scattering equations by a piecewise solution of the Howie-Whelan equations.

Phenomena Associated with Oxygen in Titanium

1967 ◽  
Vol 25 ◽  
pp. 310-311
Author(s):  
E. U. Lee ◽  
P. A. Garner ◽  
J. S. Owens
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Microscope ◽  
Microstructural Changes ◽  
Electrolytic Polishing ◽  
Interstitial Impurities ◽  
Thin Foils ◽  
Transmission Electron ◽  
Iodide Titanium ◽  
Alpha Titanium

Evidence for ordering (1-6) of interstitial impurities (O and C) has been obtained in b.c.c. metals, such as niobium and tantalum. In this paper we report the atomic and microstructural changes in an oxygenated c.p.h. metal (alpha titanium) as observed by transmission electron microscopy and diffraction.Oxygen was introduced into zone-refined iodide titanium sheets of 0.005 in. thickness in an atmosphere of oxygen and argon at 650°C, homogenized at 800°C and furnace-cooled in argon. Subsequently, thin foils were prepared by electrolytic polishing and examined in a JEM-7 electron microscope, operated at 100 KV.

scholarly journals Electron Microscopy Investigation of Magnetization Process in Thin Foils and Nanostructures

2007 ◽  
Vol 1026 ◽  
Author(s):  
Pascale Bayle-Guillemaud ◽  
Aurelien Masseboeuf ◽  
Fabien Cheynis ◽  
Jean-Christophe Toussaint ◽  
Olivier Fruchart ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Magnetic Anisotropy ◽  
Magnetic Induction ◽  
Perpendicular Magnetic Anisotropy ◽  
In Situ Observation ◽  
Magnetic Imaging ◽  
Thin Foils ◽  
Transmission Electron

AbstractThis paper presents investigations of magnetization configuration evolution during in-situ magnetic processes in materials exhibiting planar and perpendicular magnetic anisotropy. Transmission electron microscopy has been used to perform magnetic imaging. Fresnel contrasts in Lorentz Transmission Electron Microscopy (LTEM) and phase retrieval methods such as Transport of Intensity Equation (TIE) solving or electron holography have been implemented. These techniques are sensitive to magnetic induction perpendicular to the electron beam and can give access to a spatially resolved (resolution better than 10 nm) mapping of magnetic induction distribution and could be extended to dynamical studies during in-situ observation. Thin foils of FePd alloys with a strong perpendicular magnetic anisotropy (PMA) and self-assembled Fe dots are presented. Both are studied during magnetization processes exhibiting the capacities of in-situ magnetic imaging in a TEM.

scholarly journals Correlation between structure and mass distribution of the nuclear pore complex and of distinct pore complex components.

1990 ◽  
Vol 110 (4) ◽  
pp. 883-894 ◽  
Author(s):  
R Reichelt ◽  
A Holzenburg ◽  
E L Buhle ◽  
M Jarnik ◽  
A Engel ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nuclear Envelope ◽  
Three Dimensional ◽  
Structural Features ◽  
Nuclear Pore ◽  
Xenopus Laevis Oocyte ◽  
Three Dimensional Model ◽  
Transmission Electron ◽  
Freeze Dried

Nuclear pore complexes (NPCs) prepared from Xenopus laevis oocyte nuclear envelopes were studied in "intact" form (i.e., unexposed to detergent) and after detergent treatment by a combination of conventional transmission electron microscopy (CTEM) and quantitative scanning transmission electron microscopy (STEM). In correlation-averaged CTEM pictures of negatively stained intact NPCs and of distinct NPC components (i.e., "rings," "spoke" complexes, and "plug-spoke" complexes), several fine structural features arranged with octagonal symmetry about a central axis could reproducibly be identified. STEM micrographs of unstained/freeze-dried intact NPCs as well as of their components yielded comparable but less distinct features. Mass determination by STEM revealed the following molecular masses: intact NPC with plug, 124 +/- 11 MD; intact NPC without plug, 112 +/- 11 MD; heavy ring, 32 +/- 5 MD; light ring, 21 +/- 4 MD; plug-spoke complex, 66 +/- 8 MD; and spoke complex, 52 +/- 3 MD. Based on these combined CTEM and STEM data, a three-dimensional model of the NPC exhibiting eightfold centrosymmetry about an axis perpendicular to the plane of the nuclear envelope but asymmetric along this axis is proposed. This structural polarity of the NPC across the nuclear envelope is in accord with its well-documented functional polarity facilitating mediated nucleocytoplasmic exchange of molecules and particles.

Lipid Nanotube Encapsulating Method for Two- and Three-Dimensional Transmission Electron Microscopy Analyses of Cage-Shaped Proteins

2008 ◽  
Vol 47 (1) ◽  
pp. 394-399 ◽  
Author(s):  
Hirotoshi Furusho ◽  
Yumiko Mishima ◽  
Norihiro Kameta ◽  
Mitsutoshi Masuda ◽  
Ichiro Yamashita ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Three Dimensional ◽  
Transmission Electron ◽  
Lipid Nanotube

scholarly journals Transmission electron microscopy analysis of the crystallography of precipitates in Mg–Sn alloys aged at high temperatures

2014 ◽  
Vol 47 (5) ◽  
pp. 1729-1735 ◽  
Author(s):  
Xin Nie ◽  
Yimin Guan ◽  
Dongshan Zhao ◽  
Yu Liu ◽  
Jianian Gui ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Three Dimensional ◽  
Dark Field ◽  
Peak Hardness ◽  
Invariant Line ◽  
Orientation Relationships ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Annular Dark Field

The crystallographic orientation relationships (ORs) of precipitated β-Mg2Sn particles in Mg–9.76 wt% Sn alloy aged at 573 K for 5 h, corresponding to its peak hardness, were investigated by advanced transmission electron microscopy (TEM). OR-3 of (110)β//(0001)αand [\overline 111]β//[1\overline 210]αand OR-4 of (110)β//(0001)αand [001]β//[2\overline 1\overline 10]αare the key ORs of β-Mg2Sn particles in the alloy. The proportions of β-Mg2Sn particles exhibiting OR-3 and OR-4 were determined as 75.1 and 24.3%, respectively. Crystallographic factors determined the predominance of OR-3 in the precipitated β-Mg2Sn particles. This mechanism was analyzed by a three-dimensional invariant line model constructed using a transformation matrix in reciprocal space. Models of the interface of precipitated β-Mg2Sn and the α-Mg matrix were constructedviahigh-resolution TEM and atomic resolution high-angle annular dark-field scanning TEM.

Nano-Thermometry: Transmission Electron Microscopy of Femtosecond Laser Irradiated Co/Si Multilayer Thin Foils

2005 ◽  
Vol 899 ◽  
Author(s):  
Yoosuf Picard ◽  
Steven M. Yalisove
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Amorphous Silicon ◽  
Heat Dissipation ◽  
Crystalline Silicon ◽  
Pulse Length ◽  
Multilayer Systems ◽  
Hole Edge ◽  
Thin Foils ◽  
Transmission Electron

AbstractPre-thinned foils composed of amorphous silicon and polycrystalline cobalt were irradiated using femtosecond pulse-length lasers at fluences sufficient for ablation (material removal). The resultant ablated hole and surrounding vicinity was studied using transmission electron microscopy to determine modifications to the structure. Evidence of cobalt silicide formation was observed within a 3 micron radius of the laser hole edge by use of selected area electron diffraction (SAED). In addition, elongated grains of crystalline silicon was observed within 500 nm of the laser hole edge, indicating melting of the amorphous silicon and heat dissipation slow enough to allow recyrstallization. This initial work demonstrates the use of pre-designed nanostructured multilayer systems as a method for nanoscale profiling of heat dissipation following pulsed laser irradiation.

Enamel Crystal Shape: History of an Idea

1987 ◽  
Vol 1 (2) ◽  
pp. 322-329 ◽  
Author(s):  
H. Warshawsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cross Sections ◽  
Three Dimensional ◽  
Unit Cell ◽  
Cross Sectional ◽  
Transmission Electron ◽  
History Of ◽  
Sectional Shape ◽  
Imaging Plane

The purpose of this paper is to review evidence which casts doubt on the interpretation universally applied to hexagonal images seen in sectioned enamel. The evidence is based on two possible models to explain the hexagonal profiles seen in mammalian enamel with transmission electron microscopy. The "hexagonal ribbon" model proposes that hexagonal profiles are true cross-sections of elongated hexagonal ribbons. The "rectangular ribbon" model proposes that hexagonal profiles are caused by three-dimensional segments that are parallelepipeds contained in the Epon section. Since shadow projections of such rectangular segments give angles that are inconsistent with the hexagonal unit cell, a model based on ribbons with rhomboidal cut ends and angles of 60 and 120° is proposed. The "rhomboidal ribbon" model projects shadows with angles that are predicted by the unit cell. It is suggested that segments of such crystallites in section project as opaque hexagons on the imaging plane in routine transmission electron microscopy. Morphological observations on crystallites in sections - together with predictions from the hexagonal, rectangular, and rhomboidal ribbon models - indicate that crystallites in rat incisor enamel are flat ribbons with rhomboidal cross-sectional shape. Hexagonal images in electron micrographs of thin-sectioned enamel can result from rhomboidal-ended, parallelepiped-shaped segments of these crystallites projected and viewed as two-dimensional shadows.

Sign in / Sign up

Export Citation Format

Share Document