Biology of the Gene: The Ergon/Chronon System

1969 ◽  
Vol 18 (4) ◽  
pp. 329-380 ◽  
Author(s):  
L. Gedda ◽  
G. Brenci

SummaryThe concordance of physiological and pathological times in human identical twin pairs induced the authors to postulate the existence of a hereditary biological time.Having formulated the hypothesis that the information of each gene has a given period of existence and that, therefore, every gene has its own inherited temporal dimension, the authors report on five different experimental studies intended to verify their hypothesis.In the first study (cf II. 1) a twin research on bone age and dental age is performed. The chronological study of the appearance of ossification nuclei in carpal bones and of mineralization of the gems of permanent dentition, in 20 MZ and 20 DZ human twin pairs, indicates that these wellknown “biological timetables” exhibit about 70% of genotypical control.In order to verify whether biological time is a function of the genotype as a whole, or a property of each individual gene, the authors carried out an experimental study on the mean lifespan in different strains of Drosophila melanogaster whose genotypes were fully known (cf II.2). Their results indicate that the specific information of certain genes controls the insect's lifespan; it may also be inferred that the differential persistence of its specific information is an attribute of each individual gene. This chronological dimension of the gene is called chronon, which the authors also define as “the period during which the original information of the gene remains unchanged” — whether it is used for transcription or duplication, or it remains at the potential stage.The determination of alkaline phosphatase activity in the same strains of D. melanogaster (cf II.3) affords an estimate of the amount of genie information (intensity of the individual trait) and the variation thereof during the gene's chronon. The authors observe that the amount of information decreases gradually during the gene's chronon, suggesting that this be due to the gradual exhaustion of a given specific energy. The decrease in the amount of information in the longitudinal study of chronon leads the authors to identify a further fundamental parametric unit of the gene which they call ergon.Ergon is defined as “the degree of stability of a gene”.In the fourth study (cf II.4) the twin test is applied to the chromosome association index in subcultures of lymphocytes from MZ and DZ twins at age 6 and age 60. This study affords a parallel estimate of chronon (i.e., duration of information) and ergon (i.e., stability of information).Chronon and ergon are found to be interrelated; they may be considered as variables in a dimensional equation of the gene. Thus, the existence of the Ergon/Chronon (E/C) system is postulated.Nine parameters of development and of senescence (first smile, first word, first steps, first pubic hair, menarche, first white hair, first loss of a permanent tooth, first use of reading glasses, onset of menopause) are studied in an experimental population of 666 twin pairs of either zygosity, leading the authors to formulate several conclusions concerning the characteristics of the E/C system (cf II.5).The interpretation of their experimental findings leads the authors to consider the ergon (energy of stability) of a gene as the total result of the stabilities of all the nucleotides making up the DNA sequence of that gene. Since it is well known that the stability of adenine-thymine (AT) bonds exceeds the stability of guanine-cytosine (GC) bonds, and that different combinations of codons (differing in at least one nucleotide) may provide the same information, it is clear that identical polypeptide chains may be produced under the control of genetically different ergons resulting in genetically different chronons.The authors summarize these concepts in the following two aphorisms: “one gene, one stability” (ergon) and “one gene, one time” (chronon).Biological time, development, senescence, homeostasis and disease are interpreted by the authors in the light of the E/C system.

2021 ◽  
Vol 11 (8) ◽  
pp. 3444
Author(s):  
Sergey A. Lavrenko ◽  
Dmitriy I. Shishlyannikov

The authors focus on the process of potash ore production by a mechanized method. They show that currently there are no approved procedures for assessing the performance of heading-and-winning machines operating in the conditions of potash mines. This causes difficulties in determining the field of application of heading-and-winning machines, complicates the search for implicit technical solutions for the modernisation of existing models of mining units, prohibits real-time monitoring of the stability of stope-based technological processes and makes it difficult to assess the performance of the services concerning mining enterprises. The work represents an aggregate assessment of the performance of heading-and-winning machines for potash mines by determining complex indicators describing the technological and technical levels of organising the work in stopes. Such indicators are the coefficients of productivity and energy efficiency, respectively. Experimental studies have been carried out in the conditions of the potash mine of the Verkhnekamskoye potassium-magnesium salt deposit to assess the performance of the latest and most productive Ural-20R heading-and-winning machines manufactured in Russia. Using the above methodological approaches, this paper shows that the unsatisfactory technological performance of the studied machine is due to the low productivity of the mine district transport. The average productivity coefficient was 0.29. At the same time, high values of the energy efficiency coefficient show that the productivity of the machine is on par with design conditions.


Actuators ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 35
Author(s):  
Yu Cao ◽  
Zhongzheng Fu ◽  
Mengshi Zhang ◽  
Jian Huang

This paper presents a tracking control method for pneumatic muscle actuators (PMAs). Considering that the PMA platform only feedbacks position, and the velocity and disturbances cannot be observed directly, we use the extended-state-observer (ESO) for simultaneously estimating the system states and disturbances by using measurable variables. Integrated with the ESO, a super twisting controller (STC) is design based on estimated states to realize the high-precision tracking. According to the Lyapunov theorem, the stability of the closed-loop system is ensured. Simulation and experimental studies are conducted, and the results show the convergence of the ESO and the effectiveness of the proposed method.


1994 ◽  
Vol 116 (3) ◽  
pp. 419-428 ◽  
Author(s):  
J. E. Colgate

This paper presents both theoretical and experimental studies of the stability of dynamic interaction between a feedback controlled manipulator and a passive environment. Necessary and sufficient conditions for “coupled stability”—the stability of a linear, time-invariant n-port (e.g., a robot, linearized about an operating point) coupled to a passive, but otherwise arbitrary, environment—are presented. The problem of assessing coupled stability for a physical system (continuous time) with a discrete time controller is then addressed. It is demonstrated that such a system may exhibit the coupled stability property; however, analytical, or even inexpensive numerical conditions are difficult to obtain. Therefore, an approximate condition, based on easily computed multivariable Nyquist plots, is developed. This condition is used to analyze two controllers implemented on a two-link, direct drive robot. An impedance controller demonstrates that a feedback controlled manipulator may satisfy the coupled stability property. A LQG/LTR controller illustrates specific consequences of failure to meet the coupled stability criterion; it also illustrates how coupled instability may arise in the absence of force feedback. Two experimental procedures—measurement of endpoint admittance and interaction with springs and masses—are introduced and used to evaluate the above controllers. Theoretical and experimental results are compared.


2021 ◽  
Vol 58 (4) ◽  
pp. 55-68
Author(s):  
F. Capligins ◽  
A. Litvinenko ◽  
A. Aboltins ◽  
E. Austrums ◽  
A. Rusins ◽  
...  

Abstract The paper presents a study of the chaotic jerk circuit (CJC) employment capabilities for digital communications. The concept of coherent chaos shift keying (CSK) communication system with controlled error feedback chaotic synchronization is proposed for a specific CJC in two modifications. The stability of chaotic synchronization between the two CJCs was evaluated in terms of voltage drop at the input of the slave circuit and the impact of channel noise using simulations and experimental studies.


2017 ◽  
Vol 26 (46) ◽  
Author(s):  
Víctor Mendoza-Estrada ◽  
Melissa Romero-Baños ◽  
Viviana Dovale-Farelo ◽  
William López-Pérez ◽  
Álvaro González-García ◽  
...  

In this research, first-principles calculations were carried out within the density functional theory (DFT) framework, using LDA and GGA, in order to study the structural, elastic, electronic and thermal properties of InAs in the zinc-blende structure. The results of the structural properties (a, B0, ) agree with the theoretical and experimental results reported by other authors. Additionally, the elastic properties, the elastic constants (C11, C12 and C44), the anisotropy coefficient (A) and the predicted speeds of the sound ( , , and ) are in agreement with the results reported by other authors. In contrast, the shear modulus (G), the Young's modulus (Y) and the Poisson's ratio (v) show some discrepancy with respect to the experimental values, although, the values obtained are reasonable. On the other hand, it is evident the tendency of the LDA and GGA approaches to underestimate the value of the band-gap energy in semiconductors. The thermal properties (V, , θD yCV) of InAs, calculated using the quasi-harmonic Debye model, are slightly sensitive as the temperature increases. According to the stability criteria and the negative value of the enthalpy of formation, InAs is mechanically and thermodynamically stable. Therefore, this work can be used as a future reference for theoretical and experimental studies based on InAs.


2019 ◽  
Vol 8 (1) ◽  
pp. 22 ◽  
Author(s):  
Hailey Wilmer ◽  
Lauren Porensky ◽  
María Fernández-Giménez ◽  
Justin Derner ◽  
David Augustine ◽  
...  

In the North American Great Plains, multigenerational ranches and grassland biodiversity are threatened by dynamic and uncertain climatic, economic, and land use processes. Working apart, agricultural and conservation communities face doubtful prospects of reaching their individual goals of sustainability. Rangeland research could serve a convening platform, but experimental studies seldom involve local manager communities. The Collaborative Adaptive Rangeland Management (CARM) project, however, has undertaken a ten-year, ranch-level, participatory research effort to explore how community-engaged research can increase our understanding of conservation and ranching goals. Using ethnographic data and the nature-culture concept—which recognizes the inseparability of ecological relationships that are shaped by both biological and social processes—we examine the CARM team’s process of revising their management objectives (2016–2018). In CARM’s early days, the team established locally-relevant multifunctional goals and objectives. As team members’ understanding of the ecosystem improved, they revised objectives using more spatially, temporally and ecologically specific information. During the revision process, they challenged conventional ecological theories and grappled with barriers to success outside of their control. The emerging CARM nature-culture, based on a sense of place and grounded in hope, provides insights into effective community-engaged research to enhance rangeland livelihood and conservation outcomes.


Author(s):  
Zied Sahraoui ◽  
Kamel Mehdi ◽  
Moez Ben-Jaber

The development of the manufacturing-based industries is principally due to the improvement of various machining operations. Experimental studies are important in researches, and their results are also considered useful by the manufacturing industries with their aim to increase quality and productivity. Turning is one of the principal machining processes, and it has been studied since the 20th century in order to prevent machining problems. Chatter or self-excited vibrations represent an important problem and generate the most negative effects on the machined workpiece. To study this cutting process problem, various models were developed to predict stable and unstable cutting conditions. Stability analysis using lobes diagrams became useful to classify stable and unstable conditions. The purpose of this study is to analyze a turning process stability using an analytical model, with three degrees of freedoms, supported and validated with experimental tests results during roughing operations conducted on AU4G1 thin-walled tubular workpieces. The effects of the tubular workpiece thickness, the feed rate and the tool rake angle on the machining process stability will be presented. In addition, the effect of an additional structural damping, mounted inside the tubular workpiece, on the machining process stability will be also studied. It is found that the machining stability process is affected by the tubular workpiece thickness, the feed rate and the tool rake angle. The additional structural damping increases the stability of the machining process and reduces considerably the workpiece vibrations amplitudes. The experimental results highlight that the dynamic behavior of turning process is governed by large radial deformations of the thin-walled workpieces. The influence of this behavior on the stability of the machining process is assumed to be preponderant.


Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 830
Author(s):  
Michael Ortner ◽  
Neosha Navaei ◽  
Martin Lenzhofer

Planar fluxgate structures have been the focus of multiple experimental studies. However, theoretical treatises are still limited to the classical models that describe 3D structures. In this paper we derive an effective fluxgate equation for planar systems, dealing with strong stray fields and direct coupling, and show the stability and applicability of the Vacquier implementation. To support the theoretical model, FEM simulations are performed that also provide means of layouting planar fluxgates by pure magnetostatic simulation.


2019 ◽  
Vol 97 ◽  
pp. 01039
Author(s):  
Pavel Gudkov ◽  
Pavel Kagan ◽  
Anton Pilipenko ◽  
E Yu Zhukova ◽  
E A Zinovieva ◽  
...  

The article discusses the possibility of using the criteria of energy saving, cost and comfort as an estimate criterion in the analysis of information modeling technologies for low-rise buildings at the stages of design, implementation and operation. The insulation systems of low-rise buildings, including frame type, are considered as an object of study. Different types of insulation systems of frame buildings are considered and, as a result, the expediency of using rolled polyethylene foam as an insulating material is established. Its use allows to form a seamless insulating sheath with minimization of heat transfer bridges, as well as to eliminate the use of additional wind-proof and vapor-insulating membranes. The regularities of the influence of operating factors on the thermal resistance of the insulating shell are established. The data obtained as a result of the implementation of experimental studies allow us to state that low water absorption and low vapor permeability of the insulating layer exclude the possibility of its wetting and degradation of heat-shielding parameters. The stability of the properties of the insulation sheath and the construction of the walls as a whole is ensured during the entire period of operation.


Sign in / Sign up

Export Citation Format

Share Document