scholarly journals Cultural weed management practices shorten the critical weed-free period for soybean grown in the Northern Great Plains

Weed Science ◽  
2019 ◽  
pp. 1-13
Author(s):  
Jonathan D. Rosset ◽  
Robert H. Gulden

Abstract Soybean [Glycine max (L.) Merr.] has recently become a popular rotational crop in the Canadian Northern Great Plains where herbicide-resistant (HR) soybean cultivars have been widely adopted. Intense reliance on herbicides has contributed to the development of HR weeds in soybean and other crops. Cultural weed management practices reduce the need for herbicides and lower the selection pressure for HR weed biotypes by improving the competitiveness of the crop. The effects of two row spacings, three target densities, and three cultivars on the critical weed-free period (CWFP) in soybean were evaluated as three separate experiments in southern Manitoba. In the row-spacing experiment, soybean grown in narrow rows shortened the CWFP by up to three soybean developmental stages at site-years with increased weed pressure. In the target density experiment, low-density soybean stands lengthened the CWFP by one soybean developmental stage compared with higher-density soybean stands. The effect of soybean cultivar varied among locations, yet tended to be consistent within location over the 2-yr study, suggesting that competitive ability in these soybean cultivars was linked to edaphic and/or environmental factors. Generally, the cultivar with the shortest days to maturity, which also had the shortest stature, consistently had a longer CWFP. Each of these cultural practices were effective at reducing the need for in-crop herbicide applications.

Weed Science ◽  
2021 ◽  
pp. 1-69
Author(s):  
Amit J. Jhala ◽  
Hugh J. Beckie ◽  
Thomas J. Peters ◽  
A. Stanley Culpepper ◽  
Jason K. Norsworthy

Abstract Since the commercialization of herbicide-resistant (HR) crops, primarily glyphosate-resistant (GR) crops, their adoption increased rapidly. Multiple HR traits in crops such as canola (Brassica napus L.), corn (Zea mays L.), cotton (Gossypium hirsutum L.), and soybean [Glycine max (L.) Merr.] are available in recent years, and management of their volunteers need attention to prevent interference and yield loss in rotational crops. The objectives of this review were to summarize HR crop traits in barley (Hordeum vulgare L.), canola, corn, cotton, rice (Oryza sativa L.), soybean, sugarbeet (Beta vulgaris L.), and wheat (Triticum aestivum L.); assess their potential for volunteerism; and review existing literature on the interference of HR crop volunteers, yield loss, and their management in rotational crops. Herbicide-resistant crop volunteers are problem weeds in agronomic cropping systems, and the impact of volunteerism depends on several factors such as crop grown in rotation, the density of volunteers, management practices, and micro-climate. Interference of imidazolinone-resistant (IR) barley or wheat volunteers can be a problem in rotational crops, particularly when IR crops such as canola or wheat are grown. Herbicide-resistant canola volunteers are abundant in the Northern Great Plains due to high fecundity, seed loss before or during harvest, secondary seed dormancy, and can interfere in crops grown in rotation such as flax (Linum usitatissimum L.), field peas (Pisum sativum L.), and soybean. Herbicide-resistant corn volunteers are competitive in crops grown in rotation such as corn, cotton, soybean, and sugarbeet, with yield loss depending on the density of HR corn volunteers. Volunteers of HR cotton, rice, soybean, and sugarbeet are not major concerns and can be controlled with existing herbicides. Herbicide options would be limited if the crop volunteers are multiple HR; therefore, a record-keeping of cultivar planted the previous year and selecting herbicide is important. The increasing use of 2,4-D, dicamba, glufosinate, and glyphosate in North American cropping systems requires research on herbicide interactions and alternative herbicides or methods for controlling multiple HR crop volunteers.


2015 ◽  
Vol 95 (5) ◽  
pp. 965-972 ◽  
Author(s):  
Prashant Jha ◽  
Vipan Kumar ◽  
Charlemagne A. Lim

Jha, P., Kumar, V. and Lim, C. A. 2015. Variable response of kochia [Kochia scoparia (L.) Schrad.] to auxinic herbicides dicamba and fluroxypyr in Montana. Can. J. Plant Sci. 95: 965–972. Herbicide-resistant kochia is an increasing concern for growers in the Northern Great Plains of United States and Canada. The objective of the research was to characterize the response of the three putative auxinic herbicide-resistant kochia inbreds (derived from accessions collected from wheat/chemical fallow fields in northern Montana) to dicamba and fluroxypyr relative to a susceptible (SUS) inbred. A dicamba dose-response study indicated that the three putative resistant inbreds (Chot-01, Chot-02, and Chot-03) had R/S ratios of 1.3 to 6.1 based on the visible control response (I50 values), and R/S ratios of 1.5 to 6.8 based on the shoot dry weight response (GR50 values). Dose-response experiments with fluroxypyr determined I50 R/S ratios of 1.4 to 5.7 and GR50 R/S ratios of 1.6 to 4.0 for the three putative resistant inbreds. The selected inbreds showed variable symptomology (phenotype) in response to dicamba and fluroxypyr. Among the three inbreds, Chot-01 exhibited the least epinasty, stem curling/swelling, and chlorosis/necrosis symptoms, and was resistant to dicamba and fluroxypyr. Growers should diversify their weed management tools to manage further spread of auxinic or multiple herbicide-resistant kochia in the region.


2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Gosaye Eshetu ◽  
Yekedem Bimrew ◽  
Hassen Shifa

Field survey was conducted in south eastern Ethiopia to determine the disease intensity of chocolate spot and rust and to investigate the association of disease intensity (incidence and severity) with environmental factors and crop cultural practices. A total of 280 faba bean fields were surveyed in eight districts, and type of cropping system, weed management practices, crop growth stage, previous crop in the field, and sowing date were recorded. The associations of disease intensity with independent variables were evaluated using logistic regression model. Mean disease incidence of chocolate spot varied from 70.9 to 93.2% in most fields while percentage severity index (PSI) ranged from 10.5 to 47.1%. In a reduced multiple variable model, chocolate PSI ≤ 30% showed high probability of association with mixed cropping system, good weed management practices, late planting, and when faba bean was rotated with vegetables and cereals. The mean disease incidence of faba bean rust was varied from 23.6 to 78.2%, while the mean PSI of rust was varied from 4.8 to 37.9%. In Gasera, Dinsho, and Agarfa districts, poor weed management practices, fields planted in the month of July, and when previous crop was legume had a high probability of association to (>20) rust PSI in a multiple variable reduced model. In contrast, soil types, fertilizer applied, and fungicides sprayed were not associated with disease intensity. The present study has identified cropping system, planting date, previous crop, district, and weed management practices as important variables that influence faba bean chocolate spot and rust epidemics in diversified fields. Therefore, proper weeding management practices, late planting, crop rotation habit, and other related farm practices should be carried out to reduce chocolate spot and rust impact until resistant faba bean genotypes are developed and distributed to the area.


Horticulturae ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. 18 ◽  
Author(s):  
Andrew Aipperspach ◽  
James Hammond ◽  
Harlene Hatterman-Valenti

Experiments were conducted to evaluate the effects of three pruning levels (20, 30 and 40 nodes per vine) and three fruit-zone leaf removal levels (0%, 50%, and 100%) on the yield and fruit quality of Frontenac gris and Marquette wine grapes in a northern production region. The study was conducted at three North Dakota vineyards located near Buffalo, Clifford, and Wahpeton, North Dakota, in 2011 and 2012. Increasing the number of buds retained increased yields and reduced pruning weights in both cultivars. Frontenac gris and Marquette yields were greatest when vines had 50% of the fruit-zone leaves removed due to heavier clusters, suggesting that the 100% fruit-zone leaf removal level was too severe. Individual berries in clusters were also heavier when vines were pruned to retain 40 buds. Frontenac gris fruit quality was similar both years and was not influenced by pruning or leaf removal levels. Marquette fruit total soluble solids content was greater in 2012 due to the warmer and longer growing season. Marquette fruit titratable acidity was lower when 100% of the fruit-zone leaves were removed. These results suggest that for the two cold-hardy hybrid wine grapes used in this study, greater bud retention levels should be investigated. Results also warrant further research into cultivar adaptiveness to northern Great Plains conditions. With further research, it is anticipated that wine grape cultivars and management practices will be identified to produce acceptable yields and fruit quality for commercial wine grape production.


2004 ◽  
Vol 18 (4) ◽  
pp. 1006-1012 ◽  
Author(s):  
K. Neil Harker ◽  
George W. Clayton ◽  
John T. O'Donovan ◽  
Robert E. Blackshaw ◽  
F. Craig Stevenson

Herbicide-resistant canola dominates the canola market in Canada. A multiyear field experiment was conducted at three locations to investigate the effect of time of weed removal (two-, four-, or six-leaf canola) and herbicide rate (50 or 100% recommended) in three herbicide-resistant canola systems. Weeds were controlled in glufosinate-resistant canola (GLU) with glufosinate, in glyphosate-resistant canola (GLY) with glyphosate, and in imidazolinone-resistant canola (IMI) with a 50:50 mixture of imazamox and imazethapyr. Canola yields were similar among the three canola cultivar–herbicide systems. Yields were not influenced by 50 vs. 100% herbicide rates. Timing of weed removal had the greatest effect on canola yield, with weed removal at the four-leaf stage giving the highest yields in most cases. Percent dockage was often greater for GLU and IMI than for GLY. In comparison with the other treatments, dockage levels doubled for GLU after application at 50% herbicide rates. The consistency of monocot weed control was usually greater for GLY than for GLU or IMI systems. However, weed biomass data revealed no differences in dicot weed control consistency between IMI and GLY systems. Greater dockage and weed biomass variability after weed removal at the six-leaf stage or after low herbicide rates suggests higher weed seed production, which could constrain the adoption of integrated weed management practices in subsequent years.


2013 ◽  
Vol 27 (4) ◽  
pp. 788-797 ◽  
Author(s):  
Dilpreet S. Riar ◽  
Jason K. Norsworthy ◽  
Lawrence E. Steckel ◽  
Daniel O. Stephenson ◽  
Thomas W. Eubank ◽  
...  

In fall 2011, cotton and soybean consultants from Arkansas, Louisiana, Mississippi, and Tennessee were surveyed through direct mail and on-farm visits, and rice consultants from Arkansas and Mississippi were surveyed through direct mail to assess the importance and level of implementation of herbicide resistance best management practices (HR-BMPs) for herbicide-resistant weeds. Proper herbicide timing, clean start with no weeds at planting, application of multiple effective herbicide modes of action, use of full labeled herbicide rates, and prevention of crop weed seed production with importance rating of ≥ 4.6 out of 5.0 were perceived as the most important HR-BMPs in all crops. Purchase of certified rice seed was on 90% of scouted hectares. In contrast, least important HR-BMPs as perceived by consultants with importance ratings of ≤ 4.0 in cotton, ≤ 3.7 in rice, and ≤ 3.8 in soybean were cultural practices such as manual removal of weeds; tillage including disking, cultivation, or deep tillage; narrow (≤ 50 cm)-row crops, cover crops, and altered planting dates. Narrow crop rows and cover crops in cotton; altered planting dates in cotton and soybean; and cleaning of farm equipment and manual weeding in rice and soybean is currently employed on ≤ 20% of scouted hectares. Extra costs, time constraints, adverse weather conditions, lack of labor and equipment, profitability, herbicide-related concerns, and complacency were perceived as key obstacles for adoption of most HR-BMPs. With limited adoption of most cultural practices that reduce risks of herbicide-resistant weeds, there are opportunities to educate growers concerning the proactive need and long-term benefits of adopting HR-BMPs to ensure sustainable weed management and profitable crop production.


Weed Science ◽  
2018 ◽  
Vol 66 (6) ◽  
pp. 729-737 ◽  
Author(s):  
Thomas R. Butts ◽  
Bruno C. Vieira ◽  
Débora O. Latorre ◽  
Rodrigo Werle ◽  
Greg R. Kruger

AbstractWaterhemp [Amaranthus tuberculatus(Moq.) J. D. Sauer] is a troublesome weed occurring in cropping systems throughout the U.S. Midwest with an ability to rapidly evolve herbicide resistance that could be associated with competitive disadvantages. Little research has investigated the competitiveness of differentA. tuberculatuspopulations under similar environmental conditions. The objectives of this study were to evaluate: (1) the interspecific competitiveness of three herbicide-resistantA. tuberculatuspopulations (2,4-D and atrazine resistant [2A-R], glyphosate and protoporphyrinogen oxidase [PPO]-inhibitor resistant [GP-R], and 2,4-D, atrazine, glyphosate, and PPO-inhibitor susceptible [2AGP-S]) with soybean [Glycine max(L.) Merr.]; and (2) the density-dependent response of eachA. tuberculatuspopulation within a constant soybean population in a greenhouse environment.Amaranthus tuberculatuscompetitiveness with soybean was evaluated across five target weed densities of 0, 2, 4, 8, and 16 plants pot−1(equivalent to 0, 20, 40, 80, and 160 plants m−2) with 3 soybean plants pot−1(equivalent to 300,000 plants ha−1). At the R1 soybean harvest time, no difference in soybean biomass was observed acrossA. tuberculatuspopulations. AtA. tuberculatusdensities <8 plants pot−1, the 2AGP-S population had the greatest biomass and stem diameter per plant. At the R7 harvest time, the 2AGP-S population caused the greatest loss in soybean biomass and number of pods compared with the other populations at densities of <16 plants pot−1. The 2AGP-S population had greater early-season biomass accumulation and stem diameter compared with the otherA. tuberculatuspopulations, which resulted in greater late-season reduction in soybean biomass and number of pods. This research indicates there may be evidence of interspecific competitive fitness cost associated with the evolution of 2,4-D, atrazine, glyphosate, and PPO-inhibitor resistance inA. tuberculatus. Focus should be placed on effectively using cultural weed management practices to enhance crop competitiveness, especially early in the season, to increase suppression of herbicide-resistantA. tuberculatus.


2011 ◽  
Vol 25 (3) ◽  
pp. 492-500 ◽  
Author(s):  
S. J. Smyth ◽  
M. Gusta ◽  
K. Belcher ◽  
P. W. B. Phillips ◽  
D. Castle

This article examines the changes in herbicide use in relation to canola production in Western Canada, comparing 1995 and 2006. The commercialization and widespread adoption of herbicide-resistant (HR) canola has changed weed management practices in Western Canada. Before the introduction of HR canola, weeds were controlled by herbicides and tillage as the leading herbicides at that time required tillage to allow for soil incorporation of the herbicide. Much of the tillage associated with HR canola production has been eliminated as 64% of producers are now using zero or minimum tillage as their preferred form of crop and soil management. Additionally, there have been significant changes regarding the use and application of herbicides for weed control in canola. This research shows that when comparing canola production in 1995 and 2006, the environmental impact of herbicides applied to canola decreased 53%, producer exposure to chemicals decreased 56%, and quantity of active ingredient applied decreased 1.3 million kg. The cumulative environmental impact was reduced almost 50% with the use of HR herbicides. If HR canola had not been developed and Canadian canola farmers continued to use previous production technologies, the amount of active ingredient applied to control weeds in 2007 would have been 60% above what was actually applied.


Sign in / Sign up

Export Citation Format

Share Document