In this study, Ca-based multi-metals metal-organic framework (CaMgAl-MOF) has been designed as precursor material for carbon dioxide (CO2) capture to enhance the CO2 capture capacity and stability during multiple carbonation-calcination cycles. The CaMgAl-MOFs were constructed from self-assembly of metal ions and organic ligands through hydrothermal process to make metal ions uniformly distributed through the whole structure. Upon heat treatment at 600 °C, the Ca-based multi-metals CaMgAl-MOF would gradually transform to CaO and MgO nanoparticles along with the amorphous aluminum oxide distributed in the CaO matrix. XRD, Fourier transform infrared (FTIR), and SEM were used to identify the structure and characterize the morphology. The CO2 capture capacity and multiple carbonation-calcination cyclic tests of calcined Ca-based metal-organic framework (MOF) (attached with O and indicated as Ca-MOF-O) were performed by thermal gravimetric analysis (TGA). The single metal component calcined Ca-MOF sorbent have the highest CO2 capture capacity up to 72 wt.%, but a lower stability of 61% due to severe particle aggregation. In contrast, a higher Ca-rich MOF oxide sorbent with tailoring the Mg/Al ratios, Ca0.97Mg0.025Al0.005-MOF-O, showed the best performance, not only having the high stability of ~97%, but also maintaining the highest capacity of 71 wt.%. The concept of using Ca-based MOF materials combined with mixed-metal ions for CO2 capture showed a potential route for achieving efficient multiple carbonation-calcination CO2 cycles.
Evaluation on the Stability of Amine-Mesoporous Silica Adsorbents used for CO2 Capture