Bimodal Size Distribution of VO2 Nanoparticles in Hydrophilic Polymer Films for Temperature-Triggered Infrared Transmission Control

2020 ◽  
Vol 3 (7) ◽  
pp. 6645-6653
Author(s):  
Dicho Zomaya ◽  
William Z. Xu ◽  
Bernd Grohe ◽  
Silvia Mittler ◽  
Paul A. Charpentier
2021 ◽  
Vol 30 (1) ◽  
pp. 7-17
Author(s):  
Manas Kanti Deb ◽  
Mithlesh Mahilang ◽  
Jayant Nirmalkar

Size fractionated atmospheric aerosols were collected using cascade impactor sampler on quartz flter substrate during October 2015 to February 2016 in campus of Pt Ravishankar Shukla University of Raipur Chhattisgarh. The size of aerosol particles is of crucial importance to several processes in the atmosphere. The relative concentrations in both modes are responsible for the variability observed in the shape of the size distribution. Characteristic size distributions of measured aerosol over central India showed identifcation of three main behaviour types during entire study period: (i) month in which bimodal size distribution dominated in coarse mode (October 2015, 5 December 2015 and January, 2016), (ii) those months in which bimodal distribution equally intense in both one, and coarse modes (November, 2015) and (iii) those which were mainly dominated within fine (February, 2016, December, 2015). The two-subsequent month namely November 2015 and December 2015 shows bimodal size distribution with dominance in fine size range in comparison to coarse mode, possibly these high loading of one particles is due to long range transport. The peculiar observation of air trajectory shows that there is increase in fine particles concentration during December 2015, although there in increase in temperature and wind speed. The reason for this high concentration is long range transport of air masses. However, January has normal trend in particular matter concentration. The important finding of the present study based on characteristic size distribution and air trajectory plots accomplishes that fine particles are obtained through long range transport whereas coarse particles are mainly from local origin.


2009 ◽  
Vol 105 (2) ◽  
pp. 024303 ◽  
Author(s):  
R. H. Magruder ◽  
S. J. Robinson ◽  
C. Smith ◽  
A. Meldrum ◽  
A. Halabica ◽  
...  

2005 ◽  
Vol 87 (14) ◽  
pp. 143108 ◽  
Author(s):  
Young-Jun Yu ◽  
In-Taek Jeong ◽  
Jong-Chun Woo ◽  
Wonho Jhe

2016 ◽  
Vol 16 (12) ◽  
pp. 12263-12267 ◽  
Author(s):  
Minkyeong Pyo ◽  
Joosub Lee ◽  
Woohyun Baek ◽  
Chan Woo Lee ◽  
Bum Jun Park ◽  
...  

2015 ◽  
Vol 7 (11) ◽  
pp. 920-929 ◽  
Author(s):  
Peter Majerič ◽  
Darja Jenko ◽  
Bojan Budič ◽  
Sergej Tomić ◽  
Miodrag Čolić ◽  
...  

2008 ◽  
Vol 569 ◽  
pp. 289-292
Author(s):  
Takanori Watari ◽  
Katsuhiro Ogawa ◽  
Toshio Torikai ◽  
Mitsunori Yada ◽  
Masaki Akiyama ◽  
...  

Porous plate with bimodal size distribution was prepared using the molten slag from the incinerator. The slag was pulverized to 1-10μm using a planetary ball mill. On heating the pellet formed with this powder, its relative density at 750°C and 800°C were 70% and 85%, respectively. At 750°C, each particle partially attached together at the contacted point. At 800°C, however, all particles melted, coagulated together and increased their size. The slag powder was granulated using a tumbling granulator, resulting granules of 0.5-5mm size. The compressive strength of the granule sintered at 750°C was 0.39 kgf. The density of the granule decreased by ~60%. The sintered granules were mixed with a proper amount of glass powder and starch water, and the slurry was cast to a mold (φ80mmx10mm). After drying the cast plate, it was heated at 630°C. The density of the plate was 1.2 gcm-3, ~43% of original slag value. The sound absorption coefficients of the plate were 0.02 and 0.4 at 200Hz and 1500Hz, respectively.


Sign in / Sign up

Export Citation Format

Share Document