scholarly journals Processing and mechanical properties of Mg-2.8Al-0.8Zn alloy containing bimodal size distribution

2020 ◽  
Vol 9 (2) ◽  
pp. 2495-2505 ◽  
Author(s):  
Meifeng Zhang ◽  
Mingjie Shen ◽  
Junhong Jia
Author(s):  
Massimiliano Bonesso ◽  
Pietro Rebesan ◽  
Claudio Gennari ◽  
Simone Mancin ◽  
Razvan Dima ◽  
...  

AbstractOne of the major benefits of the Laser Powder Bed Fusion (LPBF) technology is the possibility of fabrication of complex geometries and features in only one-step of production. In the case of heat exchangers in particular, this is very convenient for the fabrication of conformal cooling channels which can improve the performance of the heat transfer capability. Yet, obtaining dense copper parts printed via LPBF presents two major problems: the high reflectivity of 1 μm (the wavelength of commonly used laser sources) and the high thermal conductivity of copper that limits the maximum local temperature that can be attained. This leads to the formation of porous parts.In this contribution, the influence of the particle size distribution of the powder on the physical and mechanical properties of parts produced via LPBF is studied. Three copper powders lots with different particle size distributions are used in this study. The effect on densification from two laser scan parameters (scan speed and hatching distance) and the influence of contours scans on the lateral surface roughness is reported. Subsequently, samples manufactured with the optimal process parameters are tested for thermal and mechanical properties evaluation.


e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 713-723
Author(s):  
Wei Gong ◽  
Tuan-Hui Jiang ◽  
Xiang-Bu Zeng ◽  
Li He ◽  
Chun Zhang

AbstractThe effects of the cell size and distribution on the mechanical properties of polypropylene foam were simulated and analyzed by finite element modeling with ANSYS and supporting experiments. The results show that the reduced cell size and narrow size distribution have beneficial influences on both the tensile and impact strengths. Decreasing the cell size or narrowing the cell size distribution was more effective for increasing the impact strength than the tensile strength in the same case. The relationship between the mechanical properties and cell structure parameters has a good correlation with the theoretical model.


2021 ◽  
Vol 30 (1) ◽  
pp. 7-17
Author(s):  
Manas Kanti Deb ◽  
Mithlesh Mahilang ◽  
Jayant Nirmalkar

Size fractionated atmospheric aerosols were collected using cascade impactor sampler on quartz flter substrate during October 2015 to February 2016 in campus of Pt Ravishankar Shukla University of Raipur Chhattisgarh. The size of aerosol particles is of crucial importance to several processes in the atmosphere. The relative concentrations in both modes are responsible for the variability observed in the shape of the size distribution. Characteristic size distributions of measured aerosol over central India showed identifcation of three main behaviour types during entire study period: (i) month in which bimodal size distribution dominated in coarse mode (October 2015, 5 December 2015 and January, 2016), (ii) those months in which bimodal distribution equally intense in both one, and coarse modes (November, 2015) and (iii) those which were mainly dominated within fine (February, 2016, December, 2015). The two-subsequent month namely November 2015 and December 2015 shows bimodal size distribution with dominance in fine size range in comparison to coarse mode, possibly these high loading of one particles is due to long range transport. The peculiar observation of air trajectory shows that there is increase in fine particles concentration during December 2015, although there in increase in temperature and wind speed. The reason for this high concentration is long range transport of air masses. However, January has normal trend in particular matter concentration. The important finding of the present study based on characteristic size distribution and air trajectory plots accomplishes that fine particles are obtained through long range transport whereas coarse particles are mainly from local origin.


Sign in / Sign up

Export Citation Format

Share Document