scholarly journals Impact of Oil-Prone Sedimentary Organic Matter Quality and Hydrocarbon Generation on Source Rock Porosity: Artificial Thermal Maturation Approach

ACS Omega ◽  
2020 ◽  
Vol 5 (23) ◽  
pp. 14013-14029 ◽  
Author(s):  
Amélie Cavelan ◽  
Mohammed Boussafir ◽  
Claude Le Milbeau ◽  
Fatima Laggoun-Défarge
2019 ◽  
Vol 212 ◽  
pp. 103236 ◽  
Author(s):  
Amélie Cavelan ◽  
Mohammed Boussafir ◽  
Claude Le Milbeau ◽  
Olivier Rozenbaum ◽  
Fatima Laggoun-Défarge

2017 ◽  
Vol 5 (2) ◽  
pp. SF225-SF242 ◽  
Author(s):  
Xun Sun ◽  
Quansheng Liang ◽  
Chengfu Jiang ◽  
Daniel Enriquez ◽  
Tongwei Zhang ◽  
...  

Source-rock samples from the Upper Triassic Yanchang Formation in the Ordos Basin of China were geochemically characterized to determine variations in depositional environments, organic-matter (OM) source, and thermal maturity. Total organic carbon (TOC) content varies from 4 wt% to 10 wt% in the Chang 7, Chang 8, and Chang 9 members — the three OM-rich shale intervals. The Chang 7 has the highest TOC and hydrogen index values, and it is considered the best source rock in the formation. Geochemical evidence indicates that the main sources of OM in the Yanchang Formation are freshwater lacustrine phytoplanktons, aquatic macrophytes, aquatic organisms, and land plants deposited under a weakly reducing to suboxic depositional environment. The elevated [Formula: see text] sterane concentration and depleted [Formula: see text] values of OM in the middle of the Chang 7 may indicate the presence of freshwater cyanobacteria blooms that corresponds to a period of maximum lake expansion. The OM deposited in deeper parts of the lake is dominated by oil-prone type I or type II kerogen or a mixture of both. The OM deposited in shallower settings is characterized by increased terrestrial input with a mixture of types II and III kerogen. These source rocks are in the oil window, with maturity increasing with burial depth. The measured solid-bitumen reflectance and calculated vitrinite reflectance from the temperature at maximum release of hydrocarbons occurs during Rock-Eval pyrolysis ([Formula: see text]) and the methylphenanthrene index (MPI-1) chemical maturity parameters range from 0.8 to [Formula: see text]. Because the thermal labilities of OM are associated with the kerogen type, the required thermal stress for oil generation from types I and II mixed kerogen has a higher and narrower range of temperature for hydrocarbon generation than that of OM dominated by type II kerogen or types II and III mixed kerogen deposited in the prodelta and delta front.


2017 ◽  
Vol 5 (3) ◽  
pp. T373-T386 ◽  
Author(s):  
Min Wang ◽  
Shuangfang Lu ◽  
Wenbiao Huang ◽  
Wei Liu

Cretaceous Qingshankou ([Formula: see text]) mudstone of lacustrine origin is the major source rock for conventional hydrocarbon currently being produced in the Daqing and Jilin oilfields of the Songliao Basin, which is one of the largest continental basins in the world. Therefore, elucidating the geochemical and petrological characteristics of the [Formula: see text] mudstone is important to help determine its quality as an economically viable source for shale oil production. In our study, eight dark mudstone core samples from the [Formula: see text] formation were subjected to total organic carbon (TOC), Rock-Eval pyrolysis, X-ray diffraction, scanning electron microscopy (SEM), field emission SEM (FE-SEM), and low-pressure [Formula: see text] gas adsorption (LPGA-[Formula: see text]) experiments. Geochemical and petrological analysis results indicated the presence of a high TOC content, which originated mainly from alginate and some plant-derived organic matter, whereas bitumen was frequently present in mudstones with thermal maturity in the oil-generation stage. The [Formula: see text] mudstones were comprised mainly of clay minerals, followed by quartz, feldspar, and carbonates. The LPGA-[Formula: see text] experiments revealed the presence of nanoscale slit-shaped pores, and the contribution from mesopores to the total pore volume was the highest in most of the samples. The average pore diameters (APDs) of the mudstone samples were all smaller than 20 nm (4.36–17.79 nm). We determined that there was a clear positive correlation between the APD and the free oil content; however, there were no clear correlations between the APDs and the quartz, carbonate, and TOC contents. FEM studies revealed the presence of intergranular pores with widths of approximately 10 μm, micron-level autogenetic organic matter pores within spores, organic matter pores caused by the hydrocarbon generation effect within organic matter or clay-organic complexes, and intraparticle pores within clays or pyrite framboids. The microlevel intergranular pores might play an important role in shale oil accumulation from source rock of lacustrine origin.


2018 ◽  
Vol 9 (2) ◽  
pp. 937-951 ◽  
Author(s):  
Sajjad Ahmad ◽  
Faizan Ahmad ◽  
Abd Ullah ◽  
Muhammad Eisa ◽  
Farman Ullah ◽  
...  

Abstract The present study details the hydrocarbon source rock geochemistry and organic petrography of the outcrop and subsurface samples of the Middle Jurassic Chiltan Formation and the Lower Cretaceous Sembar Formation from the Sann #1 well Central and Southern Indus Basin, Pakistan. The total organic carbon (TOC), Rock–Eval pyrolysis, vitrinite reflectance (Ro) % and Maceral analysis techniques were used and various geochemical plots were constructed to know the quality of source rock, type of kerogen, level of maturity and migration history of the hydrocarbons. The outcrop and Sann #1 well data on the Sembar Formation reveals poor, fair, good and very good quality of the TOC, type II–III kerogen, immature–mature organic matter and an indigenous hydrocarbon generation potential. The outcrop and Sann #1 well data on the Chiltan Formation show a poor–good quality of TOC, type II–III kerogen, immature–mature source rock quality and having an indigenous hydrocarbon generation potential. The vitrinite reflectance [Ro (%)] values and Maceral types [fluorescent amorphous organic matter, exinite, alginite and inertnite] demonstrate that maturity in both Sembar and the Chiltan formation at surface and subsurface fall in the oil and gas generation zone to cracking of oil to gas condensate zone. Recurrence of organic rich and poor intervals within the Sembar and Chiltan formation are controlled by the Late Jurassic thermal uplift preceding the Indo-Madagascar separation from the Afro-Arabian Plate and Early Cretaceous local transgressive–regressive cycles. From the current study, it is concluded that both Sembar and Chiltan formation can act as a potential hydrocarbon source rock in the study area.


2014 ◽  
Vol 1006-1007 ◽  
pp. 107-111
Author(s):  
Yan Wang ◽  
Wen Biao Huang ◽  
Min Wang

Based on the analysis of source rock geochemical index, with K1qn1 Formation of southern Songliao basin as the research objective layer, it’s concluded that the mean TOC value of shale in K1qn1 Formation is higher, generally more than 1%, which belongs to the best source rock. Most of shale organic matter types are type I and type II1. The thermal evolution degree of organic matter is generally in the mature stage: a stage of large hydrocarbon generation. With logging geochemical method applied, the calculated total resources of shale oil in K1qn1 formation are 15.603 billion tons. The II level of resources are 8.765 billion tons, which is more than 50% of the total resources. The I level of resources are 4.808 billion tons while the III level of resources 2.03 billion tons. Overall, the southern Songliao Basin still has a certain degree of prospecting and mining value.


Author(s):  
Nasar Khan ◽  
Wasif Ullah ◽  
Syed M. Siyar ◽  
Bilal Wadood ◽  
Tariq Ayyub ◽  
...  

AbstractThe present study aims to investigate the origin, type, thermal maturity and hydrocarbon generation potential of organic matter and paleo-depositional environment of the Early Paleocene (Danian) Hangu Formation outcropped in the Kala-Chitta Range of Northwest Pakistan, Eastern Tethys. Organic-rich shale and coal intervals were utilized for geochemical analyses including TOC (total organic carbon) and Rock–Eval pyrolysis coupled with carbon (δ13Corg) and nitrogen (δ15Norg) stable isotopes. The organic geochemical results showed that the kerogen Type II (oil/gas prone) and Type III (gas prone) dominate the investigated rock units. The TOC (wt%) and S2 yield indicate that the rock unit quantifies sufficient organic matter (OM) to act as potential source rock. However, the thermal maturity Tmax°C marks the over maturation of the OM, which may be possibly linked with the effect attained from nearby tectonically active Himalayan Foreland Fold-and-Thrust Belt system and associated metamorphosed sequences. The organic geochemical analyses deciphered indigenous nature of the OM and resultant hydrocarbons. The δ13Corg and δ15Norg stable isotopic signatures illustrated enrichment of the OM from both marine and terrestrial sources accumulated into the Hangu Formation. The Paleo-depositional model established using organic geochemical and stable isotopic data for the formation supports its deposition in a shallow marine proximal inner shelf environment with prevalence of sub-oxic to anoxic conditions, a scenario that could enhance the OM preservation. Overall, the formation holds promising coal and shale intervals in terms of organic richness, but due to relatively over thermal maturation, it cannot act as an effective source rock for liquid hydrocarbon generation and only minor amount of dry gas can be expected. In implication, the results of this study suggest least prospects of liquid hydrocarbon generation potential within Hangu Formation at studied sections.


2018 ◽  
Vol 5 (1) ◽  
pp. 8-14
Author(s):  
Jan I. Ismael

In this study, organic geochemical characteristics and potential of Upper Oxfordian–Lower Kimmeridgian aged bituminous shale beds in Naokelekan formation (North Iraq) were investigated by using TOC and pyrolysis analyses. The Total Organic Carbon (TOC) contents for the studied samples varying between from 0.46-21.33%, average 7.06% and Taq Taq-1 well as good hydrocarbon potential (0.85-1.66 %, with average of 1.06%), whereas Jk-1 well can be rated as an very good hydrocarbon potential from 1.04-4.16 %, with average of 2.15 %. The low Hydrogen Index (HI = 24-605 mg HC/g TOC) for Bj-1 well, (HI = 147-673 mg HC/g TOC) in the Jk-1 well while in Taq Taq-1 well (HI = 9-48 mg HC/g TOC) indicate that kerogen type for the vast majority of the studied samples is Type II/I for Bj-1 well and Type IV with few samples, Type of I and II kerogens in the Taq Taq-1 and Jk-1 well. Consequently most of the organic matter of Bj-1 and Jk-1 well tends to generate petrol, even though a small portion of them exhibit a tendency to generate gas. While all samples of Taq Taq-1 well tends to generate gas. The studied bituminous rock samples characterized by low Tmax (434-602 °C) for Bj-1,Taq Taq-1 (344-429 °C) and (419-602 °C) for Jk-1 well. These values show, in terms of potential of hydrocarbon generation, that the studied samples have a source rock potential of organic matter from immature to over mature. Additionally, the S1 hydrocarbon type values indicate no external contribution of migrated hydrocarbons to the bituminous rocks of the studied area.


Sign in / Sign up

Export Citation Format

Share Document