scholarly journals Comprehensive Study on the Feasibility of Pyrolysis Biomass Char Applied to Blast Furnace Injection and Tuyere Simulation Combustion

ACS Omega ◽  
2021 ◽  
Author(s):  
Han Dang ◽  
Guangwei Wang ◽  
Chen Wang ◽  
Xiaojun Ning ◽  
Jianliang Zhang ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Biomass Char ◽  
Comprehensive Study

Obtaining and investigation of a finely dispersed fraction of granulated blast-furnace slags for use as components of clinker-free binders

2021 ◽  
pp. 56-63
Author(s):  
B. B. Khaidarov ◽  
D. S. Suvorov ◽  
D. V. Lysov ◽  
A. K. Abramov ◽  
G. G. Luchnikova ◽  
...  
Keyword(s):  
Particle Size ◽  
Blast Furnace ◽  
Physicochemical Characteristics ◽  
Air Classification ◽  
Granulated Slag ◽  
Comprehensive Study

A method for obtaining a finely dispersed fraction of ground blast-furnace granulated slag has been developed. The resulting material with the introduction of an alkaline additive can be offered as an alternative to foreign analogous fine-dispersed mineral binders, an example of which can be microcement. A comprehensive study of granular slags of two metallurgical plants was carried out, the physicochemical characteristics of materials were determined. The possibility of obtaining a fraction of ground granular slag with a particle size of no more than 16 microns using vortex electromagnetic homogenization and subsequent air classification is shown.

Mineralogy and microstructure of skull varieties in blast furnace № 6 JSC EVRAZ NTMK

2020 ◽  
pp. 11-20
Author(s):  
V. A. Perepelitsyn ◽  
K. G. Zemlyanoy ◽  
K. V. Mironov ◽  
A. A. Forshev ◽  
F. P. Nikolaev ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Petrographic Analysis ◽  
Blast Furnaces ◽  
Vanadium Compounds ◽  
Genetic Types ◽  
Refractory Compounds ◽  
Ferrous Metals ◽  
Titanium Zinc ◽  
Metal Phases ◽  
Comprehensive Study

The results of a comprehensive study of the material composition and microstructure of 20 skull samples taken after blowing out blast furnace № 6 of EVRAZ NTMK JSC are presented. More than 30 minerals and metal phases of different chemical classes were diagnosed in the samples of the skull. Unlike the skull of blast furnaces of other metallurgical plants (NLMK, ZSMK), the skull of NTMK blast furnaces has an abnormally high content of titanium, zinc, vanadium compounds, as well as heavy non-ferrous metals and sulfur. On the basis of a detailed petrographic analysis, 5 structural and genetic types (varieties in composition and origin) of the garnice were identified. The varieties of the garnish contain a large amount of grenal, which is dominated by refractory compounds of titanium and vanadium carbonitrides of the general formula (Ti, V) (C, N).

scholarly journals Improvement of Reactivity of Carbon Iron Ore Composite with Biomass Char for Blast Furnace

2009 ◽  
Vol 49 (10) ◽  
pp. 1505-1512 ◽  
Author(s):  
Shigeru Ueda ◽  
Kentaro Watanabe ◽  
Kazunari Yanagiya ◽  
Ryo Inoue ◽  
Tatsuro Ariyama
Keyword(s):  
Blast Furnace ◽  
Iron Ore ◽  
Carbon Iron ◽  
Biomass Char

Kinetics of CO2 gasification of biomass char in granulated blast furnace slag

2018 ◽  
Vol 43 (27) ◽  
pp. 12002-12012 ◽  
Author(s):  
Xin Yao ◽  
Qingbo Yu ◽  
Zhengri Han ◽  
Huaqing Xie ◽  
Wenjun Duan ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Co2 Gasification ◽  
Granulated Blast Furnace Slag ◽  
Biomass Char ◽  
Kinetics Of ◽  
Furnace Slag

Progress In The Practical Application Of Automated Image Analysis To Tem Negatives

1977 ◽  
Vol 35 ◽  
pp. 214-217
Author(s):  
F. A. Heckman ◽  
E. Redman ◽  
J.E. Connolly
Keyword(s):  
Image Analysis ◽  
Image Quality ◽  
Exposure Time ◽  
Image Contrast ◽  
Automated Image Analysis ◽  
Practical Application ◽  
Factors Affecting ◽  
High Image Quality ◽  
Qualitative Evidence ◽  
Comprehensive Study

In our initial publication on this subject1) we reported results demonstrating that contrast is the most important factor in producing the high image quality required for reliable image analysis. We also listed the factors which enhance contrast in order of the experimentally determined magnitude of their effect. The two most powerful factors affecting image contrast attainable with sheet film are beam intensity and KV. At that time we had only qualitative evidence for the ranking of enhancing factors. Later we carried out the densitometric measurements which led to the results outlined below.Meaningful evaluations of the cause-effect relationships among the considerable number of variables in preparing EM negatives depend on doing things in a systematic way, varying only one parameter at a time. Unless otherwise noted, we adhered to the following procedure evolved during our comprehensive study:Philips EM-300; 30μ objective aperature; magnification 7000- 12000X, exposure time 1 second, anti-contamination device operating.

Hexachlorobenzene toxicity in the monkey ovary: III. Ultrastructure induced by high (10 mg/kg) dose exposure

1991 ◽  
Vol 49 ◽  
pp. 130-131
Author(s):  
A. Singh ◽  
A. Dykeman ◽  
J. Jarrelf ◽  
D. C. Villeneuve
Keyword(s):  
Present Report ◽  
Reproductive Toxicity ◽  
Control Group ◽  
Primate Model ◽  
Human Follicular Fluid ◽  
Thin Sections ◽  
Cynomolgus Monkeys ◽  
Cacodylate Buffer ◽  
Induction Cycle ◽  
Comprehensive Study

Hexachlorobenzene (HCB), a persistent and mobile organochlorine pesticide, occurs in environment. HCB has been shown to be present in human follicular fluid. An objective of the present report, which is part of a comprehensive study on reproductive toxicity of HCB, was to determine the cytologic effects of the compound on ovarian follicles in a primate model.Materials and Methods. Eight Cynomolgus monkeys were housed under controlled conditions at Animal facility of Health and Welfare, Ottawa. Animals were orally administered gelatin capsules containing HCB mixed with glucose in daily dosages of 0.0 or 10 mg/kg b.w. for 90 days; the former was the control group. On the menstrual period following completion of dosing, the monkeys underwent an induction cycle of superovulation. At necropsy, one-half of an ovary from each animal was diced into ca. 2- to 3-mm cubed specimens that were fixed by immersion in 2.5% glutaraldehyde in 0.1 M cacodylate buffer (pH 7.3). Subsequent procedures followed to obtain thin sections that were examined in a Hitachi H-7000 electron microscope have been described earlier.

Comparison of Substructures Between Uniaxial and Biaxial Deformation in 1100-0 Aluminum

1981 ◽  
Vol 39 ◽  
pp. 52-53
Author(s):  
D. L. Rohr ◽  
S. S. Hecker
Keyword(s):  
Plastic Strain ◽  
Cell Walls ◽  
Room Temperature ◽  
Mechanical Response ◽  
Biaxial Tension ◽  
Initial Deformation ◽  
Uniaxial Deformation ◽  
Biaxial Deformation ◽  
Stress States ◽  
Comprehensive Study

As part of a comprehensive study of microstructural and mechanical response of metals to uniaxial and biaxial deformations, the development of substructure in 1100 A1 has been studied over a range of plastic strain for two stress states.Specimens of 1100 aluminum annealed at 350 C were tested in uniaxial (UT) and balanced biaxial tension (BBT) at room temperature to different strain levels. The biaxial specimens were produced by the in-plane punch stretching technique. Areas of known strain levels were prepared for TEM by lapping followed by jet electropolishing. All specimens were examined in a JEOL 200B run at 150 and 200 kV within 24 to 36 hours after testing.The development of the substructure with deformation is shown in Fig. 1 for both stress states. Initial deformation produces dislocation tangles, which form cell walls by 10% uniaxial deformation, and start to recover to form subgrains by 25%. The results of several hundred measurements of cell/subgrain sizes by a linear intercept technique are presented in Table I.

Microvasculature and structure of hemal lymph nodes in the wall of the rabbit bladder: a vascular corrosion casting and EM study

1995 ◽  
Vol 53 ◽  
pp. 1074-1075
Author(s):  
F.E. Hossler ◽  
M.I. McKamey ◽  
F.C. Monson
Keyword(s):  
Lymph Nodes ◽  
Light Microscopy ◽  
Corrosion Casting ◽  
Fixed Tissue ◽  
Infusion Pressure ◽  
India Ink ◽  
Cacodylate Buffer ◽  
Rabbit Bladder ◽  
Lateral Walls ◽  
Comprehensive Study

A comprehensive study of the microvasculature of the normal rabbit bladder, revealed unusual "capillary glomeruli" along the lateral walls. Here they are characterized as hemal lymph nodes using light microscopy, SEM, TEM, ink injection, and vascular casting.Bladders were perfused via a cannula placed in the abdominal aorta with either 2% glutaraldehyde in 0.1M cacodylate buffer (pH 7.4) for fixation, 10% India ink in 0.9% saline and 0.1M phosphate (pH 7.4) for vessel tracing, or resin (Mercoximethylmethacrylate: catalyst, 4:1:0.3; Ladd Research Industries) for vascular corrosion casting. Infusion pressure was 100mm Hg. Fixed tissue was sectioned from epon-araldyte resin, and stained with toluidine blue for light microscopy, and lead and uranium for TEM. Ink injected tissue was photographed directly from saline-filled bladders illuminated from below. Resin-filled tissue was macerated in 5% KOH and distilled water. Casts were critical point dried, sputter coated with goldpalladium, and examined by routine SEM at 10 KV.

Sign in / Sign up

Export Citation Format

Share Document