Polymerizations with Elemental Sulfur: From Petroleum Refining to Polymeric Materials

It is widely acknowledged that waste sulfur generated from the petroleum industry creates huge storage and ecological problems. Therefore, the various methods of utilization are becoming increasingly attractive research topics worldwide. The thermal ability of elemental sulfur to homolytic cleavage of S8 rings enables its free radical copolymerization with unsaturated organic species and the obtaining of chemically stable polymeric materials. Here we report a novel possibility to use sulfur/organic copolymers obtained via “inverse vulcanization” as curatives for rubber. For this purpose, several various sulfur/organic copolymers were synthesized and analyzed from the point of view of their performance as rubber crosslinking agents. Solvent extraction was used to purify sulfur/organic copolymers from unreacted (elemental) sulfur. Thermal properties of the prepared copolymers were characterized by thermogravimetric analysis and differential scanning calorimetry (TGA–DSC). Crosslink density and structure of cured elastomers was studied by equilibrium swelling, thiol-amine analysis and freezing point depression. Mechanical properties of the vulcanizates were determined under static and dynamic conditions (DMA—dynamic mechanical analysis). It is proved that the utilization of sulfur/organic copolymers as curatives enables an effective crosslinking process of rubbers. Taking into account the results of a crosslink density analysis and mechanical properties of the vulcanizates cured with purified copolymers, it is evident that relatively long copolymer macromolecules are also involved in the formation of chemical bonds between unsaturated rubber macromolecules.

Download Full-text

Elemental sulfur-based polymeric materials: Synthesis and characterization

Journal of Applied Polymer Science ◽

10.1002/app.43655 ◽

2016 ◽

Vol 133 (28) ◽

Cited By ~ 28

Author(s):

Mohamed Khalifa Salman ◽

Baris Karabay ◽

Lutfiye Canan Karabay ◽

Atilla Cihaner

Keyword(s):

Elemental Sulfur ◽

Polymeric Materials ◽

Synthesis And Characterization ◽

Materials Synthesis

Download Full-text

Sulfur Radical Transfer and Coupling Reaction to Benzoxazine Groups: A New Reaction Route for Preparation of Polymeric Materials Using Elemental Sulfur as a Feedstock

Macromolecular Rapid Communications ◽

10.1002/marc.201700832 ◽

2018 ◽

Vol 39 (8) ◽

pp. 1700832 ◽

Cited By ~ 15

Author(s):

Ho-Keng Lin ◽

Ying-Ling Liu

Keyword(s):

Elemental Sulfur ◽

Coupling Reaction ◽

Polymeric Materials ◽

Reaction Route ◽

Radical Transfer ◽

Sulfur Radical

Download Full-text

The Resolution and Contrast in Biological Sections Determined by Inelastic and Elastic Scattering

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071569 ◽

1973 ◽

Vol 31 ◽

pp. 224-225

Author(s):

D. L. Misell

Keyword(s):

Electron Microscopy ◽

Adverse Effect ◽

Elastic Scattering ◽

Inelastic Scattering ◽

Amorphous Carbon ◽

Polymeric Materials ◽

Chromatic Aberration ◽

Image Resolution ◽

Quantitative Estimates ◽

Elastic Ratio

In the electron microscopy of biological sections the adverse effect of chromatic aberration on image resolution is well known. In this paper calculations are presented for the inelastic and elastic image intensities using a wave-optical formulation. Quantitative estimates of the deterioration in image resolution as a result of chromatic aberration are presented as an alternative to geometric calculations. The predominance of inelastic scattering in the unstained biological and polymeric materials is shown by the inelastic to elastic ratio, I/E, within an objective aperture of 0.005 rad for amorphous carbon of a thickness, t=50nm, typical of biological sections; E=200keV, I/E=16.

Download Full-text

Scanning Electron Microscope Study of Bacteria on Mineral Surfaces

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100090634 ◽

1976 ◽

Vol 34 ◽

pp. 130-131

Author(s):

V.K. Berry

Keyword(s):

Oxidation Reaction ◽

Electron Microscope Study ◽

Elemental Sulfur ◽

Thiobacillus Ferrooxidans ◽

Physical Contact ◽

Metal Sulfides ◽

Low Grade ◽

Mineral Surfaces ◽

Mineral Surface ◽

Scanning Electron Microscope Study

There are two strains of bacteria viz. Thiobacillus thiooxidansand Thiobacillus ferrooxidanswidely mentioned to play an important role in the leaching process of low-grade ores. Another strain used in this study is a thermophile and is designated Caldariella .These microorganisms are acidophilic chemosynthetic aerobic autotrophs and are capable of oxidizing many metal sulfides and elemental sulfur to sulfates and Fe2+ to Fe3+. The necessity of physical contact or attachment by bacteria to mineral surfaces during oxidation reaction has not been fairly established so far. Temple and Koehler reported that during oxidation of marcasite T. thiooxidanswere found concentrated on mineral surface. Schaeffer, et al. demonstrated that physical contact or attachment is essential for oxidation of sulfur.

Download Full-text

Application Of Electron Microscopy To Automotive Finish Defect Analysis

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100134892 ◽

1990 ◽

Vol 48 (2) ◽

pp. 258-259

Author(s):

Martin J. Mahon ◽

Patrick W. Keating ◽

John T. McLaughlin

Keyword(s):

Electron Microscopy ◽

Zero Tolerance ◽

Polymeric Materials ◽

Plant Management ◽

Defect Analysis ◽

X Ray ◽

Root Cause ◽

Cutting Out ◽

Foreign Materials ◽

Automotive Finish

Coatings are applied to appliances, instruments and automobiles for a variety of reasons including corrosion protection and enhancement of market value. Automobile finishes are a highly complex blend of polymeric materials which have a definite impact on the eventual ability of a car to sell. Consumers report that the gloss of the finish is one of the major items they look for in an automobile.With the finish being such an important part of the automobile, there is a zero tolerance for paint defects by auto assembly plant management. Owing to the increased complexity of the paint matrix and its inability to be “forgiving” when foreign materials are introduced into a newly applied finish, the analysis of paint defects has taken on unparalleled importance. Scanning electron microscopy with its attendant x-ray analysis capability is the premier method of examining defects and attempting to identify their root cause.Defects are normally examined by cutting out a coupon sized portion of the autobody and viewing in an SEM at various angles.

Download Full-text

Colloidal systems in soils

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100168050 ◽

1994 ◽

Vol 52 ◽

pp. 64-65

Author(s):

J. Thieme ◽

J. Niemeyer ◽

P. Guttman

Keyword(s):

Clay Minerals ◽

Polymeric Materials ◽

Spatial Arrangement ◽

High Specific Surface Area ◽

Turnover Rates ◽

Colloidal Systems ◽

Chemical Conditions ◽

Aggregation Phenomena ◽

Iron And Manganese ◽

Soil Colloids

In soil science the fraction of colloids in soils is understood as particles with diameters smaller than 2μm. Clay minerals, aquoxides of iron and manganese, humic substances, and other polymeric materials are found in this fraction. The spatial arrangement (microstructure) is controlled by the substantial structure of the colloids, by the chemical composition of the soil solution, and by thesoil biota. This microstructure determines among other things the diffusive mass flow within the soils and as a result the availability of substances for chemical and microbiological reactions. The turnover of nutrients, the adsorption of toxicants and the weathering of soil clay minerals are examples of these surface mediated reactions. Due to their high specific surface area, the soil colloids are the most reactive species in this respect. Under the chemical conditions in soils, these minerals are associated in larger aggregates. The accessibility of reactive sites for these reactions on the surface of the colloids is reduced by this aggregation. To determine the turnover rates of chemicals within these aggregates it is highly desirable to visualize directly these aggregation phenomena.

Download Full-text