In-vivo evaluation of the effect of cyanoacrylate on prosthetic vascular graft infection – does cyanoacrylate increase the severity of infection?

VASA ◽  
2020 ◽  
Vol 49 (4) ◽  
pp. 281-284
Author(s):  
Atıf Yolgosteren ◽  
Gencehan Kumtepe ◽  
Melda Payaslioglu ◽  
Cuneyt Ozakin
Keyword(s):  
Vascular Graft ◽  
Graft Infection ◽  
Vascular Graft Infection ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Prosthetic Vascular Graft Infection ◽  
Group 1

Summary. Background: Prosthetic vascular graft infection (PVGI) is a complication with high mortality. Cyanoacrylate (CA) is an adhesive which has been used in a number of surgical procedures. In this in-vivo study, we aimed to evaluate the relationship between PVGI and CA. Materials and methods: Thirty-two rats were equally divided into four groups. Pouch was formed on back of rats until deep fascia. In group 1, vascular graft with polyethyleneterephthalate (PET) was placed into pouch. In group 2, MRSA strain with a density of 1 ml 0.5 MacFarland was injected into pouch. In group 3, 1 cm 2 vascular graft with PET piece was placed into pouch and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. In group 4, 1 cm 2 vascular graft with PET piece impregnated with N-butyl cyanoacrylate-based adhesive was placed and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. All rats were scarified in 96th hour, culture samples were taken where intervention was performed and were evaluated microbiologically. Bacteria reproducing in each group were numerically evaluated based on colony-forming unit (CFU/ml) and compared by taking their average. Results: MRSA reproduction of 0 CFU/ml in group 1, of 1410 CFU/ml in group 2, of 180 200 CFU/ml in group 3 and of 625 300 CFU/ml in group 4 was present. A statistically significant difference was present between group 1 and group 4 (p < 0.01), between group 2 and group 4 (p < 0.01), between group 3 and group 4 (p < 0.05). In terms of reproduction, no statistically significant difference was found in group 1, group 2, group 3 in themselves. Conclusions: We observed that the rate of infection increased in the cyanoacyrylate group where cyanoacrylate was used. We think that surgeon should be more careful in using CA in vascular surgery.

scholarly journals Effect of Different Finishing and Polishing Methods for Color Stability of the E-Max Dental Ceramics: In vitro Study

2021 ◽  
Vol 14 (4) ◽  
pp. 1508-1513
Author(s):  
Ibraheem F Alshiddi
Keyword(s):  
Surface Brightness ◽  
Color Stability ◽  
Color Measurement ◽  
Control Group ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

In order to assess the influence of finishing and polishing on the surface brightness and color stability of the ceramic veneer, fifty specimens were fabricated with 10 mm diameter and 2 mm thickness using IPS E-Max Ceramic. After glazing, 10 specimens were untouched as control group, and the other 40 specimens were abraded using 125µm diamond bur to create surface roughness. Forty specimens were divided into four groups (n=10), in group 1: specimens were finished using diamond point, in group 2 specimens’ surface was polished with a polishing kit, Group 3: Each specimen surface was polished with the polishing kit as in protocol 2 and was polished a polishing past and group 4 Each specimen was glazed by heating at 621℃ for 3 minutes followed by a temperature increase of 83℃/min up to 918℃ for 30 seconds. Color measurement was performed using spectrophotometer. Color stability data were analyzed using two-way ANOVA and Tukey’s HSD test (α=0.05). For Ra values, paired-samples t-tests were used to analyze the data and compare groups. The change in L and E showed a significant difference among the study groups; (group 1, group 2, group 3 and group 4) with respect to three variables L, a and b. A significant difference was noted when compared each group with the control; however, only group 2 showed a significant difference from group 4; the remaining groups demonstrated similar findings for all three variables. The study displayed a significant impact of the finishing and polishing technique on the surface brightness and color stability of ceramic restoration. However, it was evident that combination of two or three polishing techniques which includes polish kit and glaze enhances the surface finish and adds color stability by alternating the yellow – blue axis (increase in b) and red- green axis (decrease in a).

scholarly journals Çekirdeklik Kabak (Cucurbita pepo L.) Artıkları Silajının Besin Değerlerinin Belirlenmesi

2020 ◽  
Vol 8 (3) ◽  
pp. 768
Author(s):  
Abdurrahman Pirinç ◽  
Abdullah Özbilgin ◽  
Oğuzhan Kahraman ◽  
Esad Sami Polat
Keyword(s):  
Protein Ratio ◽  
Feed Material ◽  
Group 4 ◽  
Ethanol Content ◽  
Significant Difference ◽  
Group 3 ◽  
Silage Production ◽  
Group 2 ◽  
Nutrient Analyses ◽  
Group 1

In this study, nutritional values of silages made from seed pumpkin residues were investigated. Pumpkin residues collected from Konya region were put into silo in vacuum sacks with various additives. As additives, straw, inoculant containing lactic acid bacteria or a mixture of both in certain proportions were used. After the silos were opened, their pH was determined and then samples were taken to determine the essential fatty acid compositions and nutrient analyses were done. Natural pumpkin (Group 1), natural pumpkin + inoculant (100ppm) (Group 2), withered pumpkin + 15% straw (Group 3), withered pumpkin + 15% straw + inoculant (100ppm) (Group 4) such that the fourth group is formed. Dry matter values of pumpkin groups are Group 1 7.89%, Group 2 6.62%, Group 3 12.22% and Group 4 12.25% respectively. Their pH is 3.78 in Group 1, 3.71 in Group 2, 3.86 in Group 3 and 3.82 in Group 4. The crude protein ratio in the experimental groups was determined in the highest Group 2 (14.97%) and the lowest in Group 3 (10.56%). NDF rate was determined in the highest group 4 (49.74%) and the lowest in Group 2 (28.51%). In addition, the highest ADF rate was determined in Group 4 (37.91%) and the lowest in Group 2 (24.90%). There was a statistically significant difference between the research groups in terms of ethanol content. Acetic acid and propionic acid content was found statistically significant between groups. As a result, when the pumpkin residues are silaged, it can be used as feed material in animal feeding. In addition, it can be said that pumpkin residues can be evaluated in different areas in the high amount of Ethanol content resulting from silage production.

scholarly journals Effects of eliminating tension by means of epineural stitches: a comparative electrophysiological and histomorphometrical study using different suture techniques in an animal model

2011 ◽  
Vol 69 (2b) ◽  
pp. 365-370 ◽  
Author(s):  
J Bustamante ◽  
M Socolovsky ◽  
R S Martins ◽  
J Emmerich ◽  
M G Pennini ◽  
...  
Keyword(s):  
Test Results ◽  
Motor Action ◽  
Nerve Suture ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
The Mean ◽  
Group 2 ◽  
Human Nerve ◽  
Group 1

Epineural stitches are a means to avoid tension in a nerve suture. We evaluate this technique, relative to interposed grafts and simple neurorraphy, in a rat model. METHOD: Twenty rats were allocated to four groups. For Group 1, sectioning of the sciatic nerve was performed, a segment 4 mm long discarded, and epineural suture with distal anchoring stitches were placed resulting in slight tension neurorraphy. For Group 2, a simple neurorraphy was performed. For Group 3, a 4 mm long graft was employed and Group 4 served as control. Ninety days after, reoperation, latency of motor action potentials recording and axonal counts were performed. Inter-group comparison was done by means of ANOVA and the non-parametric Kruskal-Wallis test. RESULTS: The mean motor latency for the simple suture (2.27±0.77 ms) was lower than for the other two surgical groups, but lower than among controls (1.69±0.56 ms). Similar values were founding in both group 1 (2.66±0.71 ms) and group 3 (2.64±0.6 ms). When fibers diameters were compared a significant difference was identified between groups 2 and 3 (p=0.048). CONCLUSION: Good results can be obtained when suturing a nerve employ with epineural anchoring stitches. However, more studies are needed before extrapolating results to human nerve sutures.

scholarly journals THE EFFECT OF TRACHEAL DIVERTICULUM AND CHRONIC OSTRUCTIVE LUNG DISEASE ON CHEST ANTHROPOMETRY

2021 ◽  
Author(s):  
Mine ARGALI DENIZ ◽  
Hilal ER ULUBABA ◽  
M. Furkan ARPACI ◽  
Fatih CAVUS ◽  
Gokhan DEMIRTAS ◽  
...  
Keyword(s):  
Control Group ◽  
Chronic Obstructive ◽  
Obstructive Pulmonary Disease ◽  
Group 4 ◽  
Tracheal Diverticulum ◽  
Copd Patients ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Objective: In this study, the effect of tracheal diverticula (TD) on chest anthropometry and its relation with chronic obstructive pulmonary disease (COPD) was evaluated. Method: Between January 2019 and March 2020, 995 patients who underwent chest CT were retrospectively analyzed and TD was detected in 31 cases. Group 1 is only TD, Group 2 is TD + COPD, Group 3 is only COPD, Group 4 is defined as control group. We measured the localization, size, the distance to carina and vocal cord of TDs. In all groups chest diameters at T4 and T9 levels were measured as transverse and vertical plans. Results: TDs detected mostly at the T2 and T3 levels. In Group 1 and Group 2, there was a statistically significant difference the distance to TD of vocal chords. A statistically significant difference was found between Group 1 and Group 3 only in the vertical diameter at the T4 and T9 levels. Conclusion: We observed that COPD effect TD location and also TD had opposite effect on anteroposteriorly increasing chest parameters in COPD. Precence of TD is essential on COPD patients about thorax anthropometry. Keywords: Tracheal diverticulum; antropometry; radiology; COPD; chest diameter

scholarly journals Evaluation of Apical Filling after Warm Vertical Compaction using Two Different Endodontic Materials: Resilon® and Gutta-Percha

2012 ◽  
Vol 3 (2) ◽  
pp. 166-170
Author(s):  
Carla Zogheib ◽  
Etienne Medioni
Keyword(s):  
Group 4 ◽  
Gutta Percha ◽  
Anterior Teeth ◽  
Significant Difference ◽  
Ah Plus ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Warm Vertical Compaction ◽  
Group 1

ABSTRACT Forty-eight extracted maxillary anterior teeth instrumented with ProTaper system to apical preparations 0.25, 0.40 and 0.60 mm (n = 16 each) were divided into six groups for filling as following: Group 1: Apical preparation 25/100 + gutta-percha/AH Plus sealer, group 2: Apical preparation 25/100 + Resilon/Real Seal, group 3: Apical preparation 40/100 + gutta-percha/AH plus sealer, group 4: Apical preparation 40/100 + Resilon/Real Seal, group 5: Apical preparation 60/100 + gutta-percha/AH plus, group 6: Apical preparation 60/100 + Resilon/Real Seal. All teeth were filled using the warm vertical technique. Horizontal sections at 1, 2 and 3 mm from the apex were observed by SEM under 200 × magnification. Sections were digitally photographed under a stereomicroscope and the images were transferred to a compatible PC for image analysis. The surface area of voids were calculated and compared at all levels; using the Kruskal-Wallis test with Sidak correction and Mann-Whitney U test (p > 0.05). Comparisons within each group (gutta-percha/AH plus and Resilon/Real Seal) showed the presence of voids but there was no significant difference between any level of sectioning for apical preparations of 25 and 40 (p > 0.05). The only difference was in the groups prepared to size 60 and filled with Resilon/ Real Seal which showed significantly more voids than the group filled with gutta-percha/AH plus and especially at the 3 mm level. Conclusion The system Resilon/Real Seal did not achieve better results in terms of sealing ability in the apical third when compared to the conventional gutta-percha/AH plus sealing system. How to cite this article Zogheib C, Naaman A, Medioni E. Evaluation of Apical Filling after Warm Vertical Compaction using Two Different Endodontic Materials: Resilon® and Gutta-Percha. World J Dent 2012;3(2):166-170.

scholarly journals Challenges of early motherhood: Breastfeeding difficulties and life satisfaction

Stanovnistvo ◽  
2016 ◽  
Vol 54 (1) ◽  
pp. 1-14
Author(s):  
Zeljka Buturovic ◽  
Suzana Ignjatovic ◽  
Mirjana Rasevic
Keyword(s):  
Consistent Difference ◽  
Early Motherhood ◽  
Group 4 ◽  
Choice Group ◽  
Significant Difference ◽  
On Line ◽  
Group 3 ◽  
Line Survey ◽  
Group 2 ◽  
Group 1

Many studies have looked at benefits of breastfeeding for the baby and, less frequently, the mother. Though many women find breastfeeding difficult, few studies have looked at the potential costs of breastfeeding for this group. From January 19th 2015 through April 18th 2015, the total of 1,980 Serbian mothers completed an on-line survey consisting of 74 questions which addressed their satisfaction with various areas of life. Mothers were divided into four groups depending on their breastfeeding experience: those who enjoy breastfeeding (Group 1), those who breastfeed despite finding it difficult (Group 2), those who do not breastfeed because they find it difficult, but otherwise would (Group 3) and those who do not breastfeed because ?it is their choice? (Group 4). There were 1,238 women (53.2%) in Group, 1, 546 (23.4%) in Group 2, 147 (6.3%) in Group 3 and 49 (2.1%) in Group 4. Group 2 scored lower than Group 1 on 25 out of 26 indicators of satisfaction. When these 26 indicators were averaged, there was a significant difference in the average scores between Group 1 (M = 6.87, SD = 1.10) and Group 2 (M = 6.33, SD = 1.20). Group 3 scored higher than Group 2 on 19 out of 26 indicators. There is a remarkably consistent difference in satisfaction across many areas of life between women who breastfeed joyfully and those who do it out of a sense of duty. As public pressure on women to breastfeed mounts, distinction between these two kinds of breastfeeding experiences should be kept in mind.

Blood Ca2+ modulates responsiveness of renal 25(OH)D3-1 alpha-hydroxylase to PTH in rats

1987 ◽  
Vol 253 (5) ◽  
pp. E503-E507 ◽  
Author(s):  
T. Matsumoto ◽  
K. Ikeda ◽  
K. Morita ◽  
S. Fukumoto ◽  
H. Takahashi ◽  
...  
Keyword(s):  
Base Line ◽  
Hydroxylase Activity ◽  
Dihydroxyvitamin D ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Serum Inorganic Phosphate ◽  
Group 1

To clarify whether extracellular Ca2+ modulates renal 25-hydroxyvitamin D3 [25(OH)D3]-1 alpha-hydroxylase, thyroparathyroidectomized rats were infused with 15 mM CaCl2, 20 mM EGTA, and/or 2.5 U/h parathyroid hormone (PTH), and blood Ca2+, serum 1,25-dihydroxyvitamin D [1,25(OH)2D], and renal 1 alpha-hydroxylase activity were determined. Rats with CaCl2, EGTA, or PTH infusion (group 1) exhibited low blood Ca2+, serum 1,25(OH)2D, and 1 alpha-hydroxylase activities. Infusion of CaCl2 alone (group 2) caused a significant increase in blood Ca2+ and a reduction in serum 1,25(OH)2D and 1 alpha-hydroxylase compared with group 1. Administration of PTH alone (group 3) markedly elevated blood Ca2+, serum 1,25(OH)2D, and 1 alpha-hydroxylase activity. When EGTA was infused along with PTH (group 4), blood Ca2+ was significantly reduced compared with group 3, and serum 1,25(OH)2D and renal 1 alpha-hydroxylase were further elevated. In contrast, when CaCl2 was infused with PTH (group 5), blood Ca2+ was higher than that in group 3, and serum 1,25(OH)2D and 1 alpha-hydroxylase activities were significantly reduced compared with group 3. No significant difference in serum inorganic phosphate or urinary cAMP excretion was observed by CaCl2 or EGTA infusion in both PTH-treated and nontreated rats. These results demonstrate that extracellular Ca2+ modulates the responsiveness of renal 1 alpha-hydroxylase to PTH as well as the base-line activity of the enzyme in the absence of PTH. These effects of extracellular Ca2+ on renal 1 alpha-hydroxylase may serve to offer an efficient way of regulating 1,25(OH)2D production and serum 1,25(OH)2D concentration by altering the responsiveness of 1 alpha-hydroxylase to PTH and possibly other stimulations depending on the demand for Ca2+.(ABSTRACT TRUNCATED AT 250 WORDS)

Evaluation of the Effect of Different Ferrule Designs on the Fracture Resistance of Endodontically Treated Maxillary Central Incisors Incorporating Fiber Posts, Composite Cores and Crown Restorations

2007 ◽  
Vol 8 (7) ◽  
pp. 62-69 ◽  
Author(s):  
Emre Ozel ◽  
Idil Dikbas ◽  
Jale Tanalp ◽  
Temel Koksal ◽  
Mustafa Ersoy
Keyword(s):  
Fracture Resistance ◽  
Quartz Fiber ◽  
Group 4 ◽  
Fiber Posts ◽  
Significant Difference ◽  
Group 6 ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Group 1

Abstract Aim The purpose of this study was to evaluate the fracture resistance of endodontically treated maxillary central incisors restored with quartz fiber posts, composite cores, and crowns when different types of ferrule designs were incorporated. Methods and Materials Sixty maxillary incisors were divided into six groups: Group 1 (control): teeth with root canal treatments having a full crown prosthesis; Group 2: teeth with a 2 mm circumferential ferrule; Group 3: teeth with a 2 mm ferrule only in the vestibular region; Group 4: teeth with a 2 mm ferrule only in the palatal region; Group 5: teeth with a 2 mm ferrule in the vestibular and palatal region, having cavities in both proximal areas; and Group 6: teeth with no ferrule. The teeth in the experimental groups were restored with quartz fiber posts-composite cores and full metallic crowns. All experimental teeth were subjected to an increasing compressive force with a crosshead speed of 1 mm/min, until fracture occurred. Results The median fracture values of groups were as follows: Group 1: 574.4 N, Group 2: 472.4 N, Group 3: 474.3 N, Group 4: 480.7 N, Group 5: 463.1 N, and Group 6: 297.9 N. A statistically significant difference was found between Group 1 and Group 6 (p< 0.01). Conclusion It was concluded different ferrule designs did not have any influence on the fracture resistance of teeth with fiber posts. The results of this study indicate fiber posts can safely be used for their reinforcing properties. Furthermore, there is no significant change in the resistance of teeth with fiber posts regardless of which ferrule design is incorporated. The property of these types of posts is an additional advantage in clinical practice. Citation Dikbas I, Tanalp J, Ozel E, Koksal T, Ersoy M. Evaluation of the Effect of Different Ferrule Designs on the Fracture Resistance of Endodontically Treated Maxillary Central Incisors Incorporating Fiber Posts, Composite Cores and Crown Restorations. J Contemp Dent Pract 2007 November; (8)7:062-069.

Expression of the Proto-Oncogene eIF4E in Inflammation of the Oral Cavity

2002 ◽  
Vol 126 (3) ◽  
pp. 290-295 ◽  
Author(s):  
Binoy Chandy ◽  
Fleurette Abreo ◽  
Raja Nassar ◽  
Fred J. Stucker ◽  
Cherie-Ann Nathan
Keyword(s):  
Oral Cavity ◽  
Normal Mucosa ◽  
Premalignant Lesions ◽  
Mild Dysplasia ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 5 ◽  
Group 2 ◽  
Group 1

OBJECTIVE: eIF4E (4E) is elevated in 100% of head and neck squamous cell carcinoma (HNSCC) and in premalignant lesions of the larynx. However, it is not elevated in normal mucosa. In this study, we hypothesize that 4E is not significantly elevated in inflammation unlike its expression in premalignant lesions of the oral cavity. STUDY DESIGN: Biopsies from the oral cavity were divided into 5 groups: (1) normal mucosa, (2) chronic inflammation, (3) mild dysplasia from leukoplakic lesions, (4) mild dysplasia in surgical margins of patients with HNSCC, and (5) HNSCC. Immunohistochemical qualitative analysis was then performed. RESULTS: None of the 15 specimens in group 1 and 100% of the 15 specimens in group 5 expressed 4E. Of the 29 specimens in group 2 only 4/29 (13%) overexpressed 4E compared with 10/31 (32%) in group 3 and 9/21 (42%) in group 4. There was a significant difference between groups 2 and 3 and groups 2 and 4 ( P < 0.0001 and P < 0.003 respectively) but no significant difference between groups 1 and 2 ( P = 0.13) and between groups 3 and 4 ( P = 0.30). CONCLUSION: 4E is not significantly elevated in inflammation of the oral cavity thus fulfilling one of the criteria that biomarkers require to be useful in a clinical setting.

scholarly journals The effects of local nitroglycerin on the surgical delay procedure in prefabricated flaps by vascular implant in rats

2012 ◽  
Vol 27 (12) ◽  
pp. 905-911 ◽  
Author(s):  
Jairo Zacchê de Sá ◽  
José Lamartine de Andrade Aguiar ◽  
Adriana Ferreira Cruz ◽  
Alexandre Ricardo Pereira Schuler ◽  
José Ricardo Alves de Lima ◽  
...  
Keyword(s):  
Wistar Rats ◽  
Delay Procedure ◽  
Surgical Delay ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
The Mean ◽  
Group 2 ◽  
Prefabricated Flap ◽  
Group 1

PURPOSE: To evaluate the effect of local nitroglycerin on the viable area of a prefabricated flap for vascular implant in rats, and to investigate the surgical delay procedure. METHODS: A femoral pedicle was implanted under the skin of the abdominal wall in forty Wistar rats. The animals were divided into four groups of ten: group 1 - without surgical delay procedure and local nitroglycerin; group 2 - with surgical delay procedure, but without local nitroglycerin; group 3 - without surgical delay procedure, but with local nitroglycerin; and group 4 - with simultaneous surgical delay procedure and local nitroglycerin. The percentages of the viable areas, in relation to the total flap, were calculated using AutoCAD R 14. RESULTS: The mean percentage value of the viable area was 8.9% in the group 1. 49.4% in the group 2; 8.4% in the group 3 and 1.1% in the group 4. There was significant difference between groups 1 and 2 (p=0.005), 1 and 4 (p=0.024), 2 and 3 (p=0.003), 2 and 4 (p=0.001). These results support the hypothesis that the closure of the arterial venous channels is responsible for the phenomenon of surgical delay procedure. CONCLUSION: Local nitroglycerin did not cause an increase in the prefabricated viable flap area by vascular implantation and decreased the viable flap area that underwent delay procedures.

Sign in / Sign up

Export Citation Format

Share Document