scholarly journals Directing reaction pathways via in situ control of active site geometries in PdAu single-atom alloy catalysts

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Mengyao Ouyang ◽  
Konstantinos G. Papanikolaou ◽  
Alexey Boubnov ◽  
Adam S. Hoffman ◽  
Georgios Giannakakis ◽  
...  
Keyword(s):  
Active Site ◽  
Active Sites ◽  
Heterogeneous Catalysts ◽  
Bimetallic Catalyst ◽  
Theoretical Calculations ◽  
Atomic Scale ◽  
Single Atom ◽  
In Situ Control ◽  
Single Atom Alloy

AbstractThe atomic scale structure of the active sites in heterogeneous catalysts is central to their reactivity and selectivity. Therefore, understanding active site stability and evolution under different reaction conditions is key to the design of efficient and robust catalysts. Herein we describe theoretical calculations which predict that carbon monoxide can be used to stabilize different active site geometries in bimetallic alloys and then demonstrate experimentally that the same PdAu bimetallic catalyst can be transitioned between a single-atom alloy and a Pd cluster phase. Each state of the catalyst exhibits distinct selectivity for the dehydrogenation of ethanol reaction with the single-atom alloy phase exhibiting high selectivity to acetaldehyde and hydrogen versus a range of products from Pd clusters. First-principles based Monte Carlo calculations explain the origin of this active site ensemble size tuning effect, and this work serves as a demonstration of what should be a general phenomenon that enables in situ control over catalyst selectivity.

scholarly journals Platinum–copper single atom alloy catalysts with high performance towards glycerol hydrogenolysis

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Xi Zhang ◽  
Guoqing Cui ◽  
Haisong Feng ◽  
Lifang Chen ◽  
Hui Wang ◽  
...  
Keyword(s):  
Active Sites ◽  
High Performance ◽  
Reaction Pathway ◽  
Theoretical Calculations ◽  
Experimental Studies ◽  
Value Added ◽  
Catalytic Performance ◽  
Single Atom ◽  
Glycerol Hydrogenolysis ◽  
Single Atom Alloy

AbstractSelective hydrogenolysis of biomass-derived glycerol to propanediol is an important reaction to produce high value-added chemicals but remains a big challenge. Herein we report a PtCu single atom alloy (SAA) catalyst with single Pt atom dispersed on Cu nanoclusters, which exhibits dramatically boosted catalytic performance (yield: 98.8%) towards glycerol hydrogenolysis to 1,2-propanediol. Remarkably, the turnover frequency reaches up to 2.6 × 103 molglycerol·molPtCu–SAA−1·h−1, which is to our knowledge the largest value among reported heterogeneous metal catalysts. Both in situ experimental studies and theoretical calculations verify interface sites of PtCu–SAA serve as intrinsic active sites, in which the single Pt atom facilitates the breakage of central C–H bond whilst the terminal C–O bond undergoes dissociation adsorption on adjacent Cu atom. This interfacial synergistic catalysis based on PtCu–SAA changes the reaction pathway with a decreased activation energy, which can be extended to other noble metal alloy systems.

scholarly journals A Cobalt-Iron Double-Atom Catalyst for the Oxygen Evolution Reaction

2019 ◽  
Author(s):  
Lichen Bai ◽  
Chia-Shuo Hsu ◽  
Duncan Alexander ◽  
Hao Ming Chen ◽  
Xile Hu
Keyword(s):  
Oxygen Evolution ◽  
Active Site ◽  
Oxygen Evolution Reaction ◽  
Active Sites ◽  
Single Atom ◽  
X Ray ◽  
Highly Active ◽  
Cobalt Iron ◽  
X Ray Absorption

Single atom catalysts exhibit well-defined active sites and potentially maximum atomic efficiency. However, they are unsuitable for reactions that benefit from bimetallic promotion such as the oxygen evolution reaction (OER) in alkaline medium. Here we show that a single atom Co precatalyst can be in-situ transformed into a Co-Fe double atom catalyst for OER. This catalyst exhibits one of the highest turnover frequencies among metal oxides. Electrochemical, microscopic, and spectroscopic data including those from operando X-ray absorption spectroscopy, reveal a dimeric Co-Fe moiety as the active site of the catalyst. This work demonstrates double-atom catalysis as a promising approach for the developed of defined and highly active OER catalysts.

scholarly journals A Cobalt-Iron Double-Atom Catalyst for the Oxygen Evolution Reaction

2019 ◽  
Author(s):  
Lichen Bai ◽  
Chia-Shuo Hsu ◽  
Duncan Alexander ◽  
Hao Ming Chen ◽  
Xile Hu
Keyword(s):  
Oxygen Evolution ◽  
Active Site ◽  
Oxygen Evolution Reaction ◽  
Active Sites ◽  
Single Atom ◽  
X Ray ◽  
Highly Active ◽  
Cobalt Iron ◽  
X Ray Absorption

Single atom catalysts exhibit well-defined active sites and potentially maximum atomic efficiency. However, they are unsuitable for reactions that benefit from bimetallic promotion such as the oxygen evolution reaction (OER) in alkaline medium. Here we show that a single atom Co precatalyst can be in-situ transformed into a Co-Fe double atom catalyst for OER. This catalyst exhibits one of the highest turnover frequencies among metal oxides. Electrochemical, microscopic, and spectroscopic data including those from operando X-ray absorption spectroscopy, reveal a dimeric Co-Fe moiety as the active site of the catalyst. This work demonstrates double-atom catalysis as a promising approach for the developed of defined and highly active OER catalysts.

scholarly journals Highly-efficient RuNi single-atom alloy catalysts toward chemoselective hydrogenation of nitroarenes

2021 ◽  
Author(s):  
Wei Liu ◽  
Yusen Yang ◽  
Haisong Feng ◽  
Yiming Niu ◽  
Lei Wang ◽  
...  
Keyword(s):  
Selective Hydrogenation ◽  
High Performance ◽  
Heterogeneous Catalysts ◽  
Theoretical Calculations ◽  
Single Atom ◽  
Structure Property ◽  
Active Centers ◽  
Preferential Cleavage ◽  
Rate Determining Step ◽  
Single Atom Alloy

Abstract The design and exploitation of high-performance catalysts as well as understanding the structure-property correlation have gained considerable attention in selective hydrogenation reactions, but remain a huge challenge. Herein, we report a RuNi single atom alloy (SAA) in which Ru single atoms are anchored onto Ni nanoparticle surface via Ru–Ni coordination accompanied with electron transfer from sub-surface Ni to Ru. The optimal catalyst 0.4% RuNi SAA exhibits simultaneously improved activity (TOF value: 4293 h− 1) and chemoselectivity toward selective hydrogenation of 4-nitrostyrene to 4-aminostyrene (yield: >99%), which is, to the best of our knowledge, the highest level compared with reported heterogeneous catalysts. In situ experimental researches based on XAFS, FT-IR measurements and theoretical calculations reveal that the Ru–Ni interfacial sites as intrinsic active centers facilitate the preferential cleavage of N–O bond in nitro group with a decreased energy barrier by 0.35 eV. In addition, the Ru–Ni synergistic catalysis promotes the formation of intermediates (C8H7NO* and C8H7NOH*) and accelerates the rate-determining step (hydrogenation of C8H7NOH*), resulting in the extraordinary activity and chemoselectivity toward nitroarenes hydrogenation.

What catalysis needs from the electron microscopist

1988 ◽  
Vol 46 ◽  
pp. 694-695
Author(s):  
Alexis T. Bell
Keyword(s):  
Active Sites ◽  
Heterogeneous Catalysts ◽  
Catalyst Deactivation ◽  
Surface Composition ◽  
Internal Surface ◽  
Active Phase ◽  
Atomic Scale ◽  
Metal Catalyst ◽  
Internal Surface Area ◽  
Porous Support

Heterogeneous catalysts, used in industry for the production of fuels and chemicals, are microporous solids characterized by a high internal surface area. The catalyticly active sites may occur at the surface of the bulk solid or of small crystallites deposited on a porous support. An example of the former case would be a zeolite, and of the latter, a supported metal catalyst. Since the activity and selectivity of a catalyst are known to be a function of surface composition and structure, it is highly desirable to characterize catalyst surfaces with atomic scale resolution. Where the active phase is dispersed on a support, it is also important to know the dispersion of the deposited phase, as well as its structural and compositional uniformity, the latter characteristics being particularly important in the case of multicomponent catalysts. Knowledge of the pore size and shape is also important, since these can influence the transport of reactants and products through a catalyst and the dynamics of catalyst deactivation.

scholarly journals Insights on forming N,O-coordinated Cu single-atom catalysts for electrochemical reduction CO2 to methane

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Yanming Cai ◽  
Jiaju Fu ◽  
Yang Zhou ◽  
Yu-Chung Chang ◽  
Qianhao Min ◽  
...  
Keyword(s):  
Energy Barrier ◽  
Active Sites ◽  
Theoretical Calculations ◽  
High Energy ◽  
Single Atom ◽  
Faradaic Efficiency ◽  
High Energy Barrier ◽  
Catalytic Sites ◽  
Electron Reduction ◽  
First Time

AbstractSingle-atom catalysts (SACs) are promising candidates to catalyze electrochemical CO2 reduction (ECR) due to maximized atomic utilization. However, products are usually limited to CO instead of hydrocarbons or oxygenates due to unfavorable high energy barrier for further electron transfer on synthesized single atom catalytic sites. Here we report a novel partial-carbonization strategy to modify the electronic structures of center atoms on SACs for lowering the overall endothermic energy of key intermediates. A carbon-dots-based SAC margined with unique CuN2O2 sites was synthesized for the first time. The introduction of oxygen ligands brings remarkably high Faradaic efficiency (78%) and selectivity (99% of ECR products) for electrochemical converting CO2 to CH4 with current density of 40 mA·cm-2 in aqueous electrolytes, surpassing most reported SACs which stop at two-electron reduction. Theoretical calculations further revealed that the high selectivity and activity on CuN2O2 active sites are due to the proper elevated CH4 and H2 energy barrier and fine-tuned electronic structure of Cu active sites.

scholarly journals Ambient base-free glycerol oxidation over bimetallic PdFe/SiO2 by in situ generated active oxygen species

2021 ◽  
Author(s):  
Ricci Underhill ◽  
Mark Douthwaite ◽  
Richard J. Lewis ◽  
Peter J. Miedziak ◽  
Robert D. Armstrong ◽  
...  
Keyword(s):  
Heterogeneous Catalysts ◽  
Bimetallic Catalyst ◽  
Electron Paramagnetic Resonance Spectroscopy ◽  
Active Oxygen Species ◽  
Catalytic Performance ◽  
Resonance Spectroscopy ◽  
Oxygen Species ◽  
Paramagnetic Resonance ◽  
Temperature Oxidation

AbstractLow temperature oxidation of alcohols over heterogeneous catalysts is exceptionally challenging, particularly under neutral conditions. Herein, we report on an efficient, base-free method to oxidise glycerol over a 0.5%Pd-0.5%Fe/SiO2 catalyst at ambient temperature in the presence of gaseous H2 and O2. The exceptional catalytic performance was attributed to the in situ formation of highly reactive surface-bound oxygenated species, which promote the dehydrogenation on the alcohol. The PdFe bimetallic catalyst was determined to be significantly more active than corresponding monometallic analogues, highlighting the important role both metals have in this oxidative transformation. Fe leaching was confirmed to occur over the course of the reaction but sequestering experiments, involving the addition of bare carbon to the reactions, confirmed that the reaction was predominantly heterogeneous in nature. Investigations with electron paramagnetic resonance spectroscopy suggested that the reactivity in the early stages was mediated by surface-bound reactive oxygen species; no homogeneous radical species were observed in solution. This theory was further evidenced by a direct H2O2 synthesis study, which confirmed that the presence of Fe in the bimetallic catalyst neither improved the synthesis of H2O2 nor promoted its decomposition over the PdFe/SiO2 catalyst.

scholarly journals Iron-Imprinted Single-Atomic Site Catalyst-Based Nanoprobe for Detection of Hydrogen Peroxide in Living Cells

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Zhaoyuan Lyu ◽  
Shichao Ding ◽  
Maoyu Wang ◽  
Xiaoqing Pan ◽  
Zhenxing Feng ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Active Site ◽  
Single Atom ◽  
Site Structure ◽  
Atomic Site ◽  
Ion Imprinting ◽  
Active Site Structure ◽  
In Situ Detection ◽  
Colorimetric Biosensing

AbstractFe-based single-atomic site catalysts (SASCs), with the natural metalloproteases-like active site structure, have attracted widespread attention in biocatalysis and biosensing. Precisely, controlling the isolated single-atom Fe-N-C active site structure is crucial to improve the SASCs’ performance. In this work, we use a facile ion-imprinting method (IIM) to synthesize isolated Fe-N-C single-atomic site catalysts (IIM-Fe-SASC). With this method, the ion-imprinting process can precisely control ion at the atomic level and form numerous well-defined single-atomic Fe-N-C sites. The IIM-Fe-SASC shows better peroxidase-like activities than that of non-imprinted references. Due to its excellent properties, IIM-Fe-SASC is an ideal nanoprobe used in the colorimetric biosensing of hydrogen peroxide (H2O2). Using IIM-Fe-SASC as the nanoprobe, in situ detection of H2O2 generated from MDA-MB-231 cells has been successfully demonstrated with satisfactory sensitivity and specificity. This work opens a novel and easy route in designing advanced SASC and provides a sensitive tool for intracellular H2O2 detection.

scholarly journals In situ visualisation and analysis of dynamic single atom processes in heterogeneous catalysts

2021 ◽  
Author(s):  
Pratibha L. Gai ◽  
Edward D. Boyes
Keyword(s):  
Chemical Reactions ◽  
Heterogeneous Catalysts ◽  
Solid Surfaces ◽  
Single Atom ◽  
Vital Part ◽  
Heterogeneous Chemical ◽  
Operating Temperatures ◽  
Heterogeneous Chemical Reactions

Heterogeneous chemical reactions catalyzed over solid surfaces at operating temperatures are used to produce a vital part of energy, food, healthcare products, cleaner environments and chemicals.

Sign in / Sign up

Export Citation Format

Share Document