scholarly journals Radiation pressure measurement using a macroscopic oscillator in an ambient environment

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Mikko Partanen ◽  
Hyeonwoo Lee ◽  
Kyunghwan Oh
Keyword(s):  
Radiation Pressure ◽  
Pressure Measurement ◽  
Michelson Interferometer ◽  
Ambient Conditions ◽  
Experimental Accuracy ◽  
Light Pressure ◽  
Micromechanical Resonators ◽  
Free Parameters ◽  
Cryogenic Conditions ◽  
Good Agreement

AbstractIn contrast to current efforts to quantify the radiation pressure of light using nano-micromechanical resonators in cryogenic conditions, we proposed and experimentally demonstrated the radiation pressure measurement in ambient conditions by utilizing a macroscopic mechanical longitudinal oscillator with an effective mass of the order of 20 g. The light pressure on a mirror attached to the oscillator was recorded in a Michelson interferometer and results showed, within the experimental accuracy of 3.9%, a good agreement with the harmonic oscillator model without free parameters.

The Deformation of an Erythrocyte Under the Radiation Pressure by Optical Stretch

2006 ◽  
Vol 128 (6) ◽  
pp. 830-836 ◽  
Author(s):  
Yong-Ping Liu ◽  
Chuan Li ◽  
Kuo-Kang Liu ◽  
Alvin C. K. Lai
Keyword(s):  
Radiation Pressure ◽  
Experimental Situation ◽  
Numerical Data ◽  
Shear Stiffness ◽  
Cell Deformation ◽  
Membrane Properties ◽  
Optimization Approach ◽  
Bending Modulus ◽  
Average Shear ◽  
Good Agreement

In this paper, the mechanical properties of erythrocytes were studied numerically based upon the mechanical model originally developed by Pamplona and Calladine (ASME J. Biomech. Eng., 115, p. 149, 1993) for liposomes. The case under study is the erythrocyte stretched by a pair of laser beams in opposite directions within buffer solutions. The study aims to elucidate the effect of radiation pressure from the optical laser because up to now little is known about its influence on the cell deformation. Following an earlier study by Guck et al. (Phys. Rev. Lett., 84, p. 5451, 2000; Biophys. J., 81, p. 767, 2001), the empirical results of the radiation pressure were introduced and imposed on the cell surface to simulate the real experimental situation. In addition, an algorithm is specially designed to implement the simulation. For better understanding of the radiation pressure on the cell deformation, a large number of simulations were conducted for different properties of cell membrane. Results are first discussed parametrically and then evaluated by comparing with the experimental data reported by Guck et al. An optimization approach through minimizing the errors between experimental and numerical data is used to determine the optimal values of membrane properties. The results showed that an average shear stiffness around 4.611×10-6Nm−1, when the nondimensional ratio of shear modulus to bending modulus ranges from 10 to 300. These values are in a good agreement with those reported in literature.

scholarly journals Drift-corrected trends and periodic variations in MIPAS IMK/IAA ozone measurements

2014 ◽  
Vol 14 (5) ◽  
pp. 2571-2589 ◽  
Author(s):  
E. Eckert ◽  
T. von Clarmann ◽  
M. Kiefer ◽  
G. P. Stiller ◽  
S. Lossow ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Recent Literature ◽  
Michelson Interferometer ◽  
Quasi Biennial Oscillation ◽  
Significance Level ◽  
Tropical Tropopause ◽  
Time Period ◽  
Ozone Trends ◽  
Institute Of Technology ◽  
Good Agreement

Abstract. Drifts, trends and periodic variations were calculated from monthly zonally averaged ozone profiles. The ozone profiles were derived from level-1b data of the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) by means of the scientific level-2 processor run by the Karlsruhe Institute of Technology (KIT), Institute for Meteorology and Climate Research (IMK). All trend and drift analyses were performed using a multilinear parametric trend model which includes a linear term, several harmonics with period lengths from 3 to 24 months and the quasi-biennial oscillation (QBO). Drifts at 2-sigma significance level were mainly negative for ozone relative to Aura MLS and Odin OSIRIS and negative or near zero for most of the comparisons to lidar measurements. Lidar stations used here include those at Hohenpeissenberg (47.8° N, 11.0° E), Lauder (45.0° S, 169.7° E), Mauna Loa (19.5° N, 155.6° W), Observatoire Haute Provence (43.9° N, 5.7° E) and Table Mountain (34.4° N, 117.7° W). Drifts against the Atmospheric Chemistry Experiment Fourier Transform Spectrometer (ACE-FTS) were found to be mostly insignificant. The assessed MIPAS ozone trends cover the time period of July 2002 to April 2012 and range from −0.56 ppmv decade−1 to +0.48 ppmv decade−1 (−0.52 ppmv decade−1 to +0.47 ppmv decade−1 when displayed on pressure coordinates) depending on altitude/pressure and latitude. From the empirical drift analyses we conclude that the real ozone trends might be slightly more positive/less negative than those calculated from the MIPAS data, by conceding the possibility of MIPAS having a very small (approximately within −0.3 ppmv decade−1) negative drift for ozone. This leads to drift-corrected trends of −0.41 ppmv decade−1 to +0.55 ppmv decade−1 (−0.38 ppmv decade−1 to +0.53 ppmv decade−1 when displayed on pressure coordinates) for the time period covered by MIPAS Envisat measurements, with very few negative and large areas of positive trends at mid-latitudes for both hemispheres around and above 30 km (~10 hPa). Negative trends are found in the tropics around 25 and 35 km (~25 and 5 hPa), while an area of positive trends is located right above the tropical tropopause. These findings are in good agreement with the recent literature. Differences of the trends compared with the recent literature could be explained by a possible shift of the subtropical mixing barriers. Results for the altitude–latitude distribution of amplitudes of the quasi-biennial, annual and the semi-annual oscillation are overall in very good agreement with recent findings.

Radiation Pressure Dominated Plasma Flow

1979 ◽  
Vol 34 (9) ◽  
pp. 1059-1062 ◽  
Author(s):  
P. Mulser ◽  
G. Spindler
Keyword(s):  
Supersonic Flow ◽  
Radiation Pressure ◽  
Plasma Flow ◽  
Thermal Transport ◽  
Laser Pulses ◽  
Numerical Calculations ◽  
Plasma Flows ◽  
Light Pressure ◽  
Spherical Plasma

Abstract The influence of light pressure on plane and spherical plasma flows is treated. Numerical calculations show that smooth laser pulses lead to formation of an overdense plateau if thermal transport is non-negligible there, and that an originally supersonic flow becomes subsonic in this region. The results are consistent with analytical considerations. Density humps, as reported in the literature, are found in conjunction with spiking pulses or prepulses only.

On Blade Damping Technology Using Passive Piezoelectric Dampers

2012 ◽  
Author(s):  
Sebastian M. Schwarzendahl ◽  
Jaroslaw Szwedowicz ◽  
Marcus Neubauer ◽  
Lars Panning ◽  
Jörg Wallaschek
Keyword(s):  
Mode Shape ◽  
Mechanical Strain ◽  
Piezoelectric Element ◽  
Measured Data ◽  
Experimental Investigations ◽  
Response Functions ◽  
Ambient Conditions ◽  
Optimal Position ◽  
Measured Frequency Response ◽  
Good Agreement

This paper deals with a new damping concept for turbine blade vibrations utilizing piezoelectric material. A passive piezo damper consists of a piezoelectric element and a passive electric network connected to its electrodes. The damping performance depends on the size and location of the piezoelectric element with respect to the mode shape of the mechanical strain. Numerical and experimental investigations are carried out on a rigidly clamped simplified compressor blade at stand still and ambient conditions. An optimization process incorporating electromechanical finite element calculations determines the optimal position of the piezo damper in regard to the mode shape of interest. By applying the computed and measured Frequency Response Functions, the damping performance with and without piezo-damper are compared and referred to the measured material damping. The obtained numerical results are in very good agreement with the measured data, leading to a promising damping performance in real application.

Thermodynamics of Stable and Metastable Cu-O-H Compounds

2011 ◽  
Vol 172-174 ◽  
pp. 973-978 ◽  
Author(s):  
Pavel A. Korzhavyi ◽  
Inna Soroka ◽  
Mats Boman ◽  
Börje Johansson
Keyword(s):  
Experimental Data ◽  
Perturbation Theory ◽  
Physical Properties ◽  
Density Functional ◽  
Metastable Phase ◽  
Experimental Studies ◽  
Ambient Conditions ◽  
Phonon Spectra ◽  
Density Functional Perturbation Theory ◽  
Good Agreement

We apply density functional perturbation theory together with experimental studies in order to investigate the structure and physical properties of possible stable and metastable copper(I) compounds with oxygen and hydrogen. Copper(I) hydride, CuH, is found to be a metastable phase which decomposes at ambient conditions and exhibiting a semiconducting gap in the electronic spectrum. The calculated structure and phonon spectra are found to be in good agreement with experimental data. The phonon spectra of a novel metastable phase, copper(I) hydroxide, are also determined.

scholarly journals A NEW ANSATZ FOR QUARK AND LEPTON MASS MATRICES

1992 ◽  
Vol 07 (26) ◽  
pp. 2429-2435 ◽  
Author(s):  
GIAN F. GIUDICE
Keyword(s):  
Vacuum Expectation ◽  
Cabibbo Angle ◽  
Expectation Values ◽  
Higgs Vacuum ◽  
Grand Unified Theories ◽  
Fermion Masses ◽  
Mass Matrices ◽  
Unified Theories ◽  
Free Parameters ◽  
Good Agreement

A new ansatz for quark and lepton mass matrices is proposed in the context of supersymmetric grand unified theories. The 13 parameters describing fermion masses and mixings are determined in terms of only 6 free parameters, allowing 7 testable predictions. The values of Vus, Vcb, Vub, mu, md, ms and mb are then predicted as a function of the 3 charged lepton masses, mc, mt and tan β, the ratio of Higgs vacuum expectation values. In particular the Cabibbo angle and ms/md are determined in terms of only lepton masses. All predictions are in very good agreement with experiments.

scholarly journals Relationship between temperature and apparent shape of pristine ice crystals derived from polarimetric cloud radar observations during the ACCEPT campaign

2016 ◽  
Vol 9 (8) ◽  
pp. 3739-3754 ◽  
Author(s):  
Alexander Myagkov ◽  
Patric Seifert ◽  
Ulla Wandinger ◽  
Johannes Bühl ◽  
Ronny Engelmann
Keyword(s):  
Free Fall ◽  
Crystal Shape ◽  
Ice Crystal ◽  
Ambient Conditions ◽  
Axis Ratio ◽  
Microwave Scattering ◽  
Cloud Radar ◽  
Ice Particles ◽  
Rapid Changes ◽  
Good Agreement

Abstract. This paper presents first quantitative estimations of apparent ice particle shape at the top of liquid-topped clouds. Analyzed ice particles were formed under mixed-phase conditions in the presence of supercooled water and in the temperature range from −20 to −3 °C. The estimation is based on polarizability ratios of ice particles measured by a Ka-band cloud radar MIRA-35 with hybrid polarimetric configuration. Polarizability ratio is a function of the geometrical axis ratio and the dielectric properties of the observed hydrometeors. For this study, 22 cases observed during the ACCEPT (Analysis of the Composition of Clouds with Extended Polarization Techniques) field campaign were used. Polarizability ratios retrieved for cloud layers with the cloud-top temperatures of  ∼ −5,  ∼ −8,  ∼ −15, and  ∼ −20 °C were 1.6, 0.9, 0.6, and 0.9, respectively. Such values correspond to prolate, quasi-isotropic, oblate, and quasi-isotropic particles, respectively. Data from a free-fall chamber were used for the comparison. A good agreement of detected apparent shapes with well-known shape–temperature dependencies observed in laboratories was found. Polarizability ratios used for the analysis were estimated for areas located close to the cloud top, where aggregation and riming processes do not strongly affect ice particles. We concluded that, in microwave scattering models, ice particles detected in these areas can be assumed to have pristine shapes. It was also found that even slight variations of ambient conditions at the cloud top with temperatures warmer than  ∼ −5 °C can lead to rapid changes of ice crystal shape.

scholarly journals A quadratic model captures the human V1 response to variations in chromatic direction and contrast

eLife ◽  
2021 ◽  
Vol 10 ◽  
Author(s):  
Michael A Barnett ◽  
Geoffrey K Aguirre ◽  
David Brainard
Keyword(s):  
Large Range ◽  
Visual Signals ◽  
Quadratic Model ◽  
Color Model ◽  
Important Goal ◽  
Vision Science ◽  
Free Parameters ◽  
Fmri Response ◽  
Chromatic Sensitivity ◽  
Good Agreement

An important goal for vision science is to develop quantitative models of the representation of visual signals at post-receptoral sites. To this end, we develop the quadratic color model (QCM) and examine its ability to account for the BOLD fMRI response in human V1 to spatially-uniform, temporal chromatic modulations that systematically vary in chromatic direction and contrast. We find that the QCM explains the same, cross-validated variance as a conventional general linear model, with far fewer free parameters. The QCM generalizes to allow prediction of V1 responses to a large range of modulations. We replicate the results for each subject and find good agreement across both replications and subjects. We find that within the LM cone contrast plane, V1 is most sensitive to L-M contrast modulations and least sensitive to L+M contrast modulations. Within V1, we observe little to no change in chromatic sensitivity as a function of eccentricity.

Sign in / Sign up

Export Citation Format

Share Document