scholarly journals Post-collisional mantle delamination in the Dinarides implied from staircases of Oligo-Miocene uplifted marine terraces

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Philipp Balling ◽  
Christoph Grützner ◽  
Bruno Tomljenović ◽  
Wim Spakman ◽  
Kamil Ustaszewski
Keyword(s):  
Balkan Peninsula ◽  
Receiver Functions ◽  
P Wave ◽  
S Wave ◽  
Slab Geometry ◽  
Surface Uplift ◽  
River Incision ◽  
Marine Terraces ◽  
Convergence System ◽  
Internal Dinarides

AbstractThe Dinarides fold-thrust belt on the Balkan Peninsula resulted from convergence between the Adriatic and Eurasian plates since Mid-Jurassic times. Under the Dinarides, S-wave receiver functions, P-wave tomographic models, and shear-wave splitting data show anomalously thin lithosphere overlying a short down-flexed slab geometry. This geometry suggests a delamination of Adriatic lithosphere. Here, we link the evolution of this continental convergence system to hitherto unreported sets of extensively uplifted Oligocene–Miocene (28–17 Ma) marine terraces preserved at elevations of up to 600 m along the Dinaric coastal range. River incision on either side of the Mediterranean-Black Sea drainage divide is comparable to the amounts of terrace uplift. The preservation of the uplifted terraces implies that the most External Dinarides did not experience substantial deformation other than surface uplift in the Neogene. These observations and the contemporaneous emplacement of igneous rocks (33–22 Ma) in the internal Dinarides suggest that the Oligo-Miocene orogen-wide uplift was driven by post-break-off delamination of the Adriatic lithospheric mantle, this was followed by isostatic readjustment of the remaining crust. Our study details how lithospheric delamination exerts an important control on crustal deformation and that its crustal signature and geomorphic imprint can be preserved for millions of years.

A new method to estimate ocean-bottom-seismometer orientation using teleseismic receiver functions

2020 ◽  
Vol 221 (2) ◽  
pp. 893-904
Author(s):  
Hong Zheng ◽  
Jianke Fan ◽  
Dapeng Zhao ◽  
Cuilin Li ◽  
Dongdong Dong ◽  
...  
Keyword(s):  
Epicentral Distance ◽  
Synthetic Data ◽  
Receiver Functions ◽  
P Wave ◽  
New Method ◽  
Ocean Bottom ◽  
Ocean Bottom Seismometer ◽  
S Wave ◽  
P Waves ◽  
The Western Pacific

SUMMARY The orientation of an ocean-bottom-seismometer (OBS) is a critical parameter for analysing three-component seismograms, but it is difficult to estimate because of the uncontrollable OBS posture after its deployment. In this study, we develop a new and effective method to estimate the OBS orientation by fitting the amplitude of direct P wave of teleseismic receiver functions. The reliability of this method is verified using synthetic data and observed waveforms recorded at land seismic stations in Shandong Province, China. Our extensive synthetic tests show that our new method is little affected by a thin sedimentary layer that has a low S-wave velocity. The orientations of OBS stations that we deployed in the Yap subduction zone in the Western Pacific Ocean are estimated and corrected using our new method. After the correction, the direct P waves of teleseismic receiver functions show very good consistency. The effects of white and coloured noise in different levels, epicentral distance and backazimuth are also investigated, and the results show that these factors have small effects on the new method. We also examine the effect of sensor tilting on estimation of the OBS orientation, and find that a tilting correction should be made before the misorientation correction. We compare the OBS orientations determined with the new method and other methods and find that they are generally consistent with each other. We also discuss advantages and shortcomings of various methods, and think that our new method is more robust than the existing methods.

Joint inversion of receiver functions and apparent incidence angles to investigate the crustal structure of Mars

2021 ◽  
Author(s):  
Rakshit Joshi ◽  
Brigitte Knapmeyer-Endrun ◽  
Klaus Mosegaard ◽  
Felix Bissig ◽  
Amir Khan ◽  
...  
Keyword(s):  
Wave Velocity ◽  
Crustal Structure ◽  
Joint Inversion ◽  
Landing Site ◽  
Crustal Thickness ◽  
Receiver Functions ◽  
P Wave ◽  
S Wave ◽  
Data Set ◽  
Insight Mission

<p>Since InSight (the Interior Exploration using Geodesy and Heat Transport) landed 26 months ago and deployed an ultra sensitive broadband seismometer(SEIS) on the surface of Mars, around 500 seismic events of diverse variety have been detected, making it possible to directly analyze the subsurface properties of Mars for the very first time. One of the primary goals of the mission is to retrieve the crustal structure below the landing site. Current estimates differ by more than 100% for the average crustal thickness. Since data from orbital gravity measurementsprovide information on relative variations of crustal thickness but not absolute values, this landing site measurement could serve as a tie point to retrieve global crustal structure models. To do so, we propose using a joint inversion of receiver functions and apparent incidence angles, which contain information on absolute S-wave velocities of the subsurface. Since receiver function inversions suffer from a velocity depth trade-off, we in addition exploit a simple relation which defines apparent S-wave velocity as a function of observed apparent P-wave incidence angles to constrain the parameter space. Finally we use the Neighbourhood Algorithm for the inversion of a suitable joint objective function. The resulting ensemble of models is then used to derive the full uncertainty estimates for each model parameter. Before its application on data from InSight mission, we successfully tested the method on Mars synthetics and terrestrial data from various geological settings using both single and multiple events. Using the same method, we have previously been able to constrain the S-wave velocity and depth for the first inter-crustal layer of Mars between 1.7 to 2.1 km/s and 8 to 11 km, respectively. Here we present the results of applying this technique on our selected data set from the InSight mission. Results show that the data can be explained equally well by models with 2 or 3 crustal layers with constant velocities. Due to the limited data set it is difficult to resolve the ambiguity of this bi-modal solution. We therefore investigate information theoretic statistical tests as a model selection criteria and discuss their relevance and implications in seismological framework.</p><div></div><div></div><div></div>

scholarly journals Post‑collisional mantle delamination in the Dinarides implied from staircases of Oligo‑Miocene uplifted marine terraces

2021 ◽  
Author(s):  
Philipp Balling ◽  
Christoph Grützner ◽  
Bruno Tomljenović ◽  
Wim Spakman ◽  
Kamil Ustaszewski
Keyword(s):  
Black Sea ◽  
Carbonate Platform ◽  
Middle Eocene ◽  
Coastal Region ◽  
P Wave ◽  
Driving Mechanism ◽  
River Incision ◽  
Marine Terraces ◽  
The Mean ◽  
External Dinarides

<p>The Dinarides fold and thrust belt on the Balkan Peninsula is the result of the long-lasting convergence between the Adriatic and Eurasian plates since the Mid-Jurassic. Late Jurassic obduction of ophiolites, Early Cretaceous composite nappe stacking, and subsequent continent-continent collision in the latest Cretaceous resulted in folding and thrusting that in the most external part of the Dinarides took place during the Middle Eocene – Oligocene. This extensive last phase of substantial crustal shortening and thickening was associated with flexural foreland basin deposition, resulting in Eo- to early Oligocene syntectonic units. These rocks and older Mesozoic carbonate platform units now form the mountain chain of the external Dinarides. So far, the driving mechanism behind the rock uplift was unknown and it was not clear when the present-day topography formed. Here we show that horizontal marine terraces preserved at elevations of up to 600 m in the external Dinarides are crucial to answer these questions.</p><p>We extracted horizontal surfaces, river incision profiles, and the Adriatic and Black Sea catchments from a digital elevation model (DEM). The extracted horizontal surfaces are interpreted as marine terraces because they are degradational, locally preserved in a staircase morphology, neither bedding- nor fault-related, and located close to the present-day Adriatic shoreline. The marine terraces stretch c. 600 km along-strike the entire Dinaric coastal region. Their spatial correlation agrees with the position of a reported positive P-wave tomography anomaly beneath the Dinarides. This up to 180 km deep anomaly correlates also with the thinnest part of the Adriatic lithosphere and the Adriatic-Black Sea drainage divide. The orogen-perpendicular river incisions profiles reveal a symmetric river incision pattern on both sides of the drainage divide. The mean amount of the river incision is equivalent to the mean elevation of the documented marine terraces. All results point to an orogen-wide surface uplift of the Dinarides.</p><p>Based on the geological record this post-collisional uplift event can be relatively dated to Oligocene-Miocene (28-17 Ma) and seems to be broadly contemporaneous with the emplacement of igneous rocks with mantle affinity (33-22 Ma) in the internal Dinarides. Previously published geophysical and petrological, as well as the new geomorphological data presented here suggest that the post-collisional reorganization of the Dinarides is attributed to an Oligocene-Miocene mantle delamination event, which results in uplift event affecting the entire Dinarides. We also show that no significant, orogen-scale deformation affected the uplifted Dinarides after the Early Miocene.</p>

scholarly journals S-wave experiments for the exploration of a deep geothermal carbonate reservoir in the German Molasse Basin

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Britta Wawerzinek ◽  
Hermann Buness ◽  
Hartwig von Hartmann ◽  
David C. Tanner
Keyword(s):  
Upper Jurassic ◽  
Carbonate Reservoir ◽  
P Wave ◽  
Seismic Survey ◽  
Seismic Exploration ◽  
Molasse Basin ◽  
S Wave ◽  
Induced Earthquakes ◽  
Conversion Point ◽  
Facies Classification

AbstractThere are many successful geothermal projects that exploit the Upper Jurassic aquifer at 2–3 km depth in the German Molasse Basin. However, up to now, only P-wave seismic exploration has been carried out. In an experiment in the Greater Munich area, we recorded S-waves that were generated by the conventional P-wave seismic survey, using 3C receivers. From this, we built a 3D volume of P- to S-converted (PS) waves using the asymptotic conversion point approach. By combining the P-volume and the resulting PS-seismic volume, we were able to derive the spatial distribution of the vp/vs ratio of both the Molasse overburden and the Upper Jurassic reservoir. We found that the vp/vs ratios for the Molasse units range from 2.0 to 2.3 with a median of 2.15, which is much higher than previously assumed. This raises the depth of hypocenters of induced earthquakes in surrounding geothermal wells. The vp/vs ratios found in the Upper Jurassic vary laterally between 1.5 and 2.2. Since no boreholes are available for verification, we test our results against an independently derived facies classification of the conventional 3D seismic volume and found it correlates well. Furthermore, we see that low vp/vs ratios correlate with high vp and vs velocities. We interpret the latter as dolomitized rocks, which are connected with enhanced permeability in the reservoir. We conclude that 3C registration of conventional P-wave surveys is worthwhile.

Inverse design of layered periodic wave barriers based on deep learning

2021 ◽  
pp. 146442072110168
Author(s):  
Chen-Xu Liu ◽  
Gui-Lan Yu
Keyword(s):  
Deep Learning ◽  
Activation Function ◽  
Periodic Wave ◽  
P Wave ◽  
Soil Parameters ◽  
S Wave ◽  
Output Frequency ◽  
Great Generality ◽  
Typical Range ◽  
Deep Learning Model

This study presents an approach based on deep learning to design layered periodic wave barriers with consideration of typical range of soil parameters. Three cases are considered where P wave and S wave exist separately or simultaneously. The deep learning model is composed of an autoencoder with a pretrained decoder which has three branches to output frequency attenuation domains for three different cases. A periodic activation function is used to improve the design accuracy, and condition variables are applied in the code layer of the autoencoder to meet the requirements of practical multi working conditions. Forty thousand sets of data are generated to train, validate, and test the model, and the designed results are highly consistent with the targets. The presented approach has great generality, feasibility, rapidity, and accuracy on designing layered periodic wave barriers which exhibit good performance in wave suppression in targeted frequency range.

scholarly journals Reliable workflow for inversion of seismic receiver function and surface wave dispersion data: a “13 BB Star” case study

2019 ◽  
Vol 24 (1) ◽  
pp. 101-120
Author(s):  
Kajetan Chrapkiewicz ◽  
Monika Wilde-Piórko ◽  
Marcin Polkowski ◽  
Marek Grad
Keyword(s):  
Surface Wave ◽  
Inverse Problems ◽  
Receiver Function ◽  
Joint Inversion ◽  
Wave Dispersion ◽  
Receiver Functions ◽  
P Wave ◽  
Surface Wave Dispersion ◽  
Phase Velocity Dispersion ◽  
Wide Range

AbstractNon-linear inverse problems arising in seismology are usually addressed either by linearization or by Monte Carlo methods. Neither approach is flawless. The former needs an accurate starting model; the latter is computationally intensive. Both require careful tuning of inversion parameters. An additional challenge is posed by joint inversion of data of different sensitivities and noise levels such as receiver functions and surface wave dispersion curves. We propose a generic workflow that combines advantages of both methods by endowing the linearized approach with an ensemble of homogeneous starting models. It successfully addresses several fundamental issues inherent in a wide range of inverse problems, such as trapping by local minima, exploitation of a priori knowledge, choice of a model depth, proper weighting of data sets characterized by different uncertainties, and credibility of final models. Some of them are tackled with the aid of novel 1D checkerboard tests—an intuitive and feasible addition to the resolution matrix. We applied our workflow to study the south-western margin of the East European Craton. Rayleigh wave phase velocity dispersion and P-wave receiver function data were gathered in the passive seismic experiment “13 BB Star” (2013–2016) in the area of the crust recognized by previous borehole and refraction surveys. Final models of S-wave velocity down to 300 km depth beneath the array are characterized by proximity in the parameter space and very good data fit. The maximum value in the mantle is higher by 0.1–0.2 km/s than reported for other cratons.

P- and S-wave attenuation logs from monopole sonic data

Geophysics ◽  
2000 ◽  
Vol 65 (3) ◽  
pp. 755-765 ◽  
Author(s):  
Xinhua Sun ◽  
Xiaoming Tang ◽  
C. H. (Arthur) Cheng ◽  
L. Neil Frazer
Keyword(s):  
Wave Attenuation ◽  
Fluid Velocity ◽  
P Wave ◽  
Reservoir Rock ◽  
Rock Properties ◽  
S Wave ◽  
Intrinsic Attenuation ◽  
Modified Method ◽  
Receiver Array ◽  
Attenuation Profiles

In this paper, a modification of an existing method for estimating relative P-wave attenuation is proposed. By generating synthetic waveforms without attenuation, the variation of geometrical spreading related to changes in formation properties with depth can be accounted for. With the modified method, reliable P- and S-wave attenuation logs can be extracted from monopole array acoustic waveform log data. Synthetic tests show that the P- and S-wave attenuation values estimated from synthetic waveforms agree well with their respective model values. In‐situ P- and S-wave attenuation profiles provide valuable information about reservoir rock properties. Field data processing results show that this method gives robust estimates of intrinsic attenuation. The attenuation profiles calculated independently from each waveform of an eight‐receiver array are consistent with one another. In fast formations where S-wave velocity exceeds the borehole fluid velocity, both P-wave attenuation ([Formula: see text]) and S-wave attenuation ([Formula: see text]) profiles can be obtained. P- and S-wave attenuation profiles and their comparisons are presented for three reservoirs. Their correlations with formation lithology, permeability, and fractures are also presented.

Fracture detection using P-wave and S-wave vertical seismic profiling at The Geysers

Geophysics ◽  
1988 ◽  
Vol 53 (1) ◽  
pp. 76-84 ◽  
Author(s):  
E. L. Majer ◽  
T. V. McEvilly ◽  
F. S. Eastwood ◽  
L. R. Myer
Keyword(s):  
Fractured Rock ◽  
Geothermal Field ◽  
P Wave ◽  
Velocity Variation ◽  
Fracture Detection ◽  
S Wave ◽  
Fracture Geometry ◽  
Seismic Profiling ◽  
Vertical Seismic Profiling ◽  
The Geysers

In a pilot vertical seismic profiling study, P-wave and cross‐polarized S-wave vibrators were used to investigate the potential utility of shear‐wave anisotropy measurements in characterizing a fractured rock mass. The caprock at The Geysers geothermal field was found to exhibit about an 11 percent velocity variation between SH-waves and SV-waves generated by rotating the S-wave vibrator orientation to two orthogonal polarizations for each survey level in the well. The effect is generally consistent with the equivalent anisotropy expected from the known fracture geometry.

Polarization and coherence of 5 to 30 Hz seismic wave fields at a hard-rock site and their relevance to velocity heterogeneities in the crust

1990 ◽  
Vol 80 (2) ◽  
pp. 430-449 ◽  
Author(s):  
William Menke ◽  
Arthur L. Lerner-Lam ◽  
Bruce Dubendorff ◽  
Javier Pacheco
Keyword(s):  
Hard Rock ◽  
Scale Effects ◽  
Spatial Coherence ◽  
Compressional Wave ◽  
P Wave ◽  
Transverse Motion ◽  
S Wave ◽  
Chemical Explosions ◽  
Aperture Arrays ◽  
The Waves

Abstract Except for its very onset, the P wave of earthquakes and chemical explosions observed at two narrow-aperture arrays on hard-rock sites in the Adirondack Mountains have a nearly random polarization. The amount of energy on the vertical, radial, and transverse components is about equal over the frequency range 5 to 30 Hz, for the entire seismogram. The spatial coherence of the seismograms is approximately exp(−cfΔx), where c is in the range 0.4 to 0.7 km−1Hz−1, f is frequency and Δx is the distance between array elements. Vertical, radial, and transverse components were quite coherent over the aperture of the array, indicating that the transverse motion of the compressional wave is a property of relatively large (106 m3) volumes of rock, and not just an anomaly caused by a malfunctioning instrument, poor instrument-rock coupling, or out-crop-scale effects. The spatial coherence is approximately independent of component, epicentral azimuth and range, and whether P- or S-wave coda is being considered, at least for propagation distances between 5 and 170 km. These results imply a strongly and three-dimensionally heterogeneous crust, with near-receiver scattering in the uppermost crust controlling the coherence properties of the waves.

Sign in / Sign up

Export Citation Format

Share Document