CHAPTER 16. Development of Photobioreactors for H2 Production from Algae

2018 ◽  
pp. 385-418 ◽  
Author(s):  
J. M. Fernández-Sevilla ◽  
F. G. Acién Fernández ◽  
E. Molina Grima
Keyword(s):  
H2 Production

PERLAKUAN ETHYL METHANE SULFONATE (EMS) PADA ENTEROBACTER AEROGENES AY-2 DARI LIMBAH METAN FERMENTASI UNTUK PENINGKATAN PRODUKSI GAS HIDROGEN

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Mahyudin Abdul Rachman
Keyword(s):  
Metabolic Pathway ◽  
Acid Production ◽  
Double Mutant ◽  
Enterobacter Aerogenes ◽  
H2 Production ◽  
Hydrogen Gas ◽  
Survival Ratio ◽  
Ethyl Methane Sulfonate ◽  
Methane Sulfonate ◽  
Ethyl Methane

Enterobacter aerogenes AY-2 mutant is known for hydrogen gas producer which ws obtained from the sludge of methane fermentation and the yield is 1.5 fold higher than wildtype. Hydrogen gas production can be gain via NADH oxidation in anaerobic metabolic pathway by blocking organic acid production. Metabolic pathway can be changed by mutagenesis. Enterobacter aerogenes AY-2 mutated with ethyl methane sulfonate in logarithmic phase with consentration 10, 11, 12, 13, 14 and 15 μl/ml cell suspention during 120 minute. Mutation that result lowest survival ratio (0,01%) was 14 μl EMS/ml cell suspention is repeated with variation incubation time, 30, 60, 90 and 120 minute. 166 double mutant colony has been collected and choosen randomly. The choosen 43 colony was fermented in glycerol complex medium for determining ten double mutant with the highest H2 production. Double mutant AD-H43 is a highest H2 producer that increase 20% H2 production from AY-2 and has a decrease lactid acid production, 31% less from AY-2. Increasing H2 production in double mutant AD-H43 is caused by lactate dehydrogenase deffi cient.Keywords: Enterobacter aerogenes AY-2, ethyl methane sulfonate (EMS), H2 and methane sludge

Metabolically versatile Rhodobacter sphaeroides as a robust biocatalyst for H2 production from lignocellulose-derived mix substrates

Fuel ◽  
2021 ◽  
Vol 302 ◽  
pp. 121108
Author(s):  
Jun Hu ◽  
Wenwen Wei ◽  
Qing Li ◽  
Wen Cao ◽  
Anlong Zhang ◽  
...  
Keyword(s):  
Rhodobacter Sphaeroides ◽  
H2 Production

‘’Photo-electrochemical Water Splitting through Graphene-based ZnS Composites for H2 Production

2021 ◽  
pp. 115223
Author(s):  
Ahmed Hassan ◽  
Rabia Liaquat ◽  
Naseem Iqbal ◽  
Ghulam Ali ◽  
Xue Fan ◽  
...  
Keyword(s):  
Water Splitting ◽  
H2 Production ◽  
Electrochemical Water Splitting

scholarly journals Catalytic Conversion of n-C7 Asphaltenes and Resins II into Hydrogen Using CeO2-Based Nanocatalysts

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1301
Author(s):  
Oscar E. Medina ◽  
Jaime Gallego ◽  
Sócrates Acevedo ◽  
Masoud Riazi ◽  
Raúl Ocampo-Pérez ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Low Temperatures ◽  
Gaseous Mixture ◽  
H2 Production ◽  
The Other ◽  
Hydrogen Release ◽  
Catalytic Gasification ◽  
Three Samples ◽  
Main Decomposition ◽  
Catalytic Capacity

This study focuses on evaluating the volumetric hydrogen content in the gaseous mixture released from the steam catalytic gasification of n-C7 asphaltenes and resins II at low temperatures (<230 °C). For this purpose, four nanocatalysts were selected: CeO2, CeO2 functionalized with Ni-Pd, Fe-Pd, and Co-Pd. The catalytic capacity was measured by non-isothermal (from 100 to 600 °C) and isothermal (220 °C) thermogravimetric analyses. The samples show the main decomposition peak between 200 and 230 °C for bi-elemental nanocatalysts and 300 °C for the CeO2 support, leading to reductions up to 50% in comparison with the samples in the absence of nanoparticles. At 220 °C, the conversion of both fractions increases in the order CeO2 < Fe-Pd < Co-Pd < Ni-Pd. Hydrogen release was quantified for the isothermal tests. The hydrogen production agrees with each material’s catalytic activity for decomposing both fractions at the evaluated conditions. CeNi1Pd1 showed the highest performance among the other three samples and led to the highest hydrogen production in the effluent gas with values of ~44 vol%. When the samples were heated at higher temperatures (i.e., 230 °C), H2 production increased up to 55 vol% during catalyzed n-C7 asphaltene and resin conversion, indicating an increase of up to 70% in comparison with the non-catalyzed systems at the same temperature conditions.

Bifunctional single-atomic Mn sites for energy-efficient hydrogen production

Nanoscale ◽  
2021 ◽  
Author(s):  
Xianyun Peng ◽  
Junrong Hou ◽  
Yuying Mi ◽  
Jiaqiang Sun ◽  
Gaocan Qi ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Energy Saving ◽  
Hydrogen Evolution Reaction ◽  
Energy Efficient ◽  
Low Cost ◽  
Clean Energy ◽  
H2 Production ◽  
Energy Technology ◽  
Highly Active ◽  
Clean Energy Technology

Electrocatalytic hydrogen evolution reaction (HER) for H2 production is essential for future renewable and clean energy technology. Screening energy-saving, low-cost, and highly active catalysts efficiently, however, is still a grand...

scholarly journals TiO2 Nanowires with Doped g-C3N4 Nanoparticles for Enhanced H2 Production and Photodegradation of Pollutants

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 254
Author(s):  
Liushan Jiang ◽  
Fanshan Zeng ◽  
Rong Zhong ◽  
Yu Xie ◽  
Jianli Wang ◽  
...  
Keyword(s):  
Environmental Governance ◽  
Fossil Fuels ◽  
H2 Production ◽  
Tio2 Nanowires ◽  
Photocatalytic Ability ◽  
Production Of Hydrogen ◽  
Growth Method ◽  
Renewable Hydrogen ◽  
Degradation Of Pollutants

With the rapid consumption of fossil fuels, along with the ever-increasing environmental pollution, it is becoming a top priority to explore efficient photocatalysts for the production of renewable hydrogen and degradation of pollutants. Here, we fabricated a composite of g-C3N4/TiO2 via an in situ growth method under the conditions of high-temperature calcination. In this method, TiO2 nanowires with a large specific surface area could provide enough space for loading more g-C3N4 nanoparticles to obtain C3N4/TiO2 composites. Of note, the g-C3N4/TiO2 composite could effectively photocatalyze both the degradation of several pollutants and production of hydrogen, both of which are essential for environmental governance. Combining multiple characterizations and experiments, we found that the heterojunction constructed by the TiO2 and g-C3N4 could increase the photocatalytic ability of materials by prompting the separation of photogenerated carriers. Furthermore, the photocatalytic mechanism of the g-C3N4/TiO2 composite was also clarified in detail.

Sign in / Sign up

Export Citation Format

Share Document