Zinc–bromine hybrid flow battery: effect of zinc utilization and performance characteristics

RSC Advances ◽  
2014 ◽  
Vol 4 (71) ◽  
pp. 37947-37953 ◽  
Author(s):  
S. Suresh ◽  
T. Kesavan ◽  
Y. Munaiah ◽  
I. Arulraj ◽  
S. Dheenadayalan ◽  
...  
Keyword(s):  
Surface Coverage ◽  
Flow Cell ◽  
Substrate Material ◽  
Performance Characteristics ◽  
Flow Battery ◽  
Faradaic Efficiency ◽  
Redox Flow Cell ◽  
And Performance ◽  
Zinc Utilization

The effect of zinc utilization and the performance characteristics in a zinc–bromine redox flow cell is reported. Simultaneously changing the quality of the electrolyte and the electrode substrate material resulted in an increase in the surface coverage with randomly oriented crystallographic (101) planes and, as a result, the cell exhibited higher Faradaic efficiency.

scholarly journals Diagnosis of non-viral sexually transmitted infections in Lithuania and international recommendations

2006 ◽  
Vol 11 (7) ◽  
pp. 9-10 ◽  
Author(s):  
A Vagoras ◽  
R Butylkina ◽  
V Juseviciute ◽  
A Hallén ◽  
M Unemo ◽  
...  
Keyword(s):  
Sexually Transmitted Infections ◽  
Performance Characteristics ◽  
Epidemiological Surveillance ◽  
Evidence Based ◽  
External Quality ◽  
Sexually Transmitted ◽  
Quality Controls ◽  
International Evidence ◽  
And Performance

The aim of this study is to evaluate the range, quality and availability of diagnostic services for non-viral sexually transmitted infections (STIs), i.e. C. trachomatis, N. gonorrhoeae, T. vaginalis and T. pallidum, in Lithuania from September 2002 to December 2003. Surveillance data describing the organisation and performance characteristics of non-viral STI diagnostic services in Lithuania were collected using a questionnaire and subsequent site-visits. International evidence-based recommendations for non-viral STI diagnosis were used to evaluate the quality of the STI diagnostics. There were 171 facilities providing non-viral STI diagnostic services for the 3.5 million inhabitants of Lithuania. However, only 6% (n=9) of the respondents (n=153) could provide a confirmatory diagnosis, in accordance with international recommendations, for the full minimum range of relevant non-viral STIs in Lithuania, i.e. C. trachomatis, N. gonorrhoeae, T. pallidum, and T. vaginalis. In addition, accessibility to STI diagnostic services differed significantly among the different counties in Lithuania. Several of the respondents analysed low numbers of samples each year, and overall the sampling size was extremely low, especially for C. trachomatis diagnostics. In Lithuania, optimisation of non-viral STI diagnostics as well as of epidemiological surveillance and management of STIs is crucial. It may be worth considering a decrease in the number of laboratories, with those remaining having the possibility of performing STI diagnostic services that are optimised, in concordance with international recommendations, standardised, and quality assured using systematic internal and external quality controls and systems. In addition, establishment of national inter-laboratory networks and reference centres for non-viral STIs is recommended.

Lithography below 100 nm

1983 ◽  
Vol 41 ◽  
pp. 96-99
Author(s):  
L. D. Jackel
Keyword(s):  
Spatial Distribution ◽  
Electron Beam ◽  
Electron Scattering ◽  
Electron Beam Lithography ◽  
Substrate Material ◽  
Local Electron ◽  
Electron Dose ◽  
Positive Resist ◽  
Exposure Process

Most production electron beam lithography systems can pattern minimum features a few tenths of a micron across. Linewidth in these systems is usually limited by the quality of the exposing beam and by electron scattering in the resist and substrate. By using a smaller spot along with exposure techniques that minimize scattering and its effects, laboratory e-beam lithography systems can now make features hundredths of a micron wide on standard substrate material. This talk will outline sane of these high- resolution e-beam lithography techniques.We first consider parameters of the exposure process that limit resolution in organic resists. For concreteness suppose that we have a “positive” resist in which exposing electrons break bonds in the resist molecules thus increasing the exposed resist's solubility in a developer. Ihe attainable resolution is obviously limited by the overall width of the exposing beam, but the spatial distribution of the beam intensity, the beam “profile” , also contributes to the resolution. Depending on the local electron dose, more or less resist bonds are broken resulting in slower or faster dissolution in the developer.

LIGHTING AND PERFORMANCE: AN ANALYSIS ON LIGHTING EFFICIENCY OF ARCHITECTURE STUDIO

2019 ◽  
Vol 1 (1) ◽  
pp. 92
Author(s):  
Fazidah Hanim Husain
Keyword(s):  
Learning Environment ◽  
Comfort Level ◽  
Artificial Lighting ◽  
Level Measurement ◽  
Acceptable Range ◽  
Creative Learning ◽  
Illuminance Level ◽  
And Performance ◽  
Effect Of Light

Lighting is one of the key elements in any space and building infrastructure. Good design for an area in the building requires sufficient light that contributes to the efficiency of the activities. The correct method allows natural light to transmit, reduce heat and glare in providing a conducive learning environment. Light plays a significant influence to the quality of space and contributes focus of the students in an architecture studio. Previous research has shown that the effect of light also controlled emotions, behavior, and mood of the students. The operations of artificial lighting that have been used most of the time in an architecture studio during day and night may create lavishness and inadequacy at the same time. Therefore, this paper focuses on the identifying the quality of light for the architecture studio in UiTM (Perak), to instill a creative learning environment. Several methodologies adopted in this study such as illuminance level measurement using lux meter (LM-8100), and a questionnaire survey in gauging the lighting comfort level from students’ perspective. The study revealed that the illuminance level in the architecture studio is insufficient and not in the acceptable range stated in the Malaysian: Standards 1525:2007 and  not evenly distributed.  The study also concluded that the current studio environment is not condusive and appears monotonous. 

Strategic threats to energy security as risks of quality of people's life

2020 ◽  
Vol 16 (4) ◽  
pp. 730-744
Author(s):  
V.I. Loktionov
Keyword(s):  
Quality Of Life ◽  
Energy Security ◽  
Well Being ◽  
Scientific Methods ◽  
Analysis And Synthesis ◽  
General Scientific ◽  
And Performance ◽  
Economic Well Being ◽  
The Way

Subject. The article reviews the way strategic threats to energy security influence the quality of people's life. Objectives. The study unfolds the theory of analyzing strategic threats to energy security by covering the matter of quality of people's life. Methods. To analyze the way strategic threats to energy security spread across cross-sectoral commodity and production chains and influences quality of people's living, I applied the factor analysis and general scientific methods of analysis and synthesis. Results. I suggest interpreting strategic threats to energy security as risks of people's quality of life due to a reduction in the volume of energy supply. I identified mechanisms reflecting how the fuel and energy complex and its development influence the quality of people's life. The article sets out the method to assess such quality-of-life risks arising from strategic threats to energy security. Conclusions and Relevance. In the current geopolitical situation, strategic threats to energy security cause long-standing adverse consequences for the quality of people's life. If strategic threats to energy security are further construed as risk of quality of people's life, this will facilitate the preparation and performance of a more effective governmental policy on energy, which will subsequently raise the economic well-being of people.

Acoustic and Performance Characteristics of an Ideally Twisted Rotor in Hover

2021 ◽  
Author(s):  
Nicole A. Pettingill ◽  
Nikolas S. Zawodny ◽  
Christopher Thurman ◽  
Leonard V. Lopes
Keyword(s):  
Performance Characteristics ◽  
And Performance

Return on Invesment (ROI) of Software Product: A Systematic Literature Review

2015 ◽  
Vol 6 (1) ◽  
pp. 50-57
Author(s):  
Rizqa Raaiqa Bintana ◽  
Putri Aisyiyah Rakhma Devi ◽  
Umi Laili Yuhana
Keyword(s):  
Return On Investment ◽  
Assessment Criteria ◽  
Software Product ◽  
And Performance ◽  
Rational Consideration ◽  
Actual Return ◽  
The Cost ◽  
Investment Models ◽  
The Impact

The quality of the software can be measured by its return on investment. Factors which may affect the return on investment (ROI) is the tangible factors (such as the cost) dan intangible factors (such as the impact of software to the users or stakeholder). The factor of the software itself are assessed through reviewing, testing, process audit, and performance of software. This paper discusses the consideration of return on investment (ROI) assessment criteria derived from the software and its users. These criteria indicate that the approach may support a rational consideration of all relevant criteria when evaluating software, and shows examples of actual return on investment models. Conducted an analysis of the assessment criteria that affect the return on investment if these criteria have a disproportionate effort that resulted in a return on investment of a software decreased. Index Terms - Assessment criteria, Quality assurance, Return on Investment, Software product

Sign in / Sign up

Export Citation Format

Share Document