Surface texture and physicochemical characterization of mesoporous carbon – wrapped Pd–Fe catalysts for low-temperature CO catalytic oxidation

2015 ◽  
Vol 17 (43) ◽  
pp. 29027-29035 ◽  
Author(s):  
Weiliang Han ◽  
Guodong Zhang ◽  
Kun Zhao ◽  
Gongxuan Lu ◽  
Zhicheng Tang
Keyword(s):  
Catalytic Activity ◽  
Mesoporous Carbon ◽  
Physicochemical Characterization ◽  
Precipitation Method ◽  
Experimental Conditions ◽  
Co Catalytic Oxidation ◽  
Fe Catalysts ◽  
Nanocomposite Catalysts ◽  
Co Precipitation

In this paper, mesoporous carbon wrapped Pd–Fe nanocomposite catalysts were synthesized by the co-precipitation method and showed excellent catalytic activity, after optimizing the experimental conditions.

Exploring the characterization of Ni doped MgO nanoparticles using co-precipitation method

2020 ◽  
Vol 3 (1) ◽  
pp. 30-33
Author(s):  
Muthulakshmi M ◽  
Madhumitha G
Keyword(s):  
Magnesium Oxide ◽  
Analytical Techniques ◽  
Nickel Chloride ◽  
Precipitation Method ◽  
Crystalline Powder ◽  
High Melting Point ◽  
Design Synthesis ◽  
Mgo Nanoparticles ◽  
Co Precipitation

Nanotechnology is a field of applied science focused on design, synthesis and characterization of nanomaterials. The nickel and magnesium have improved their applications in transparent electrodes and nano electronics. In addition, magnesium oxide has moisture resistance and high melting point properties. In the present work has been carried out in the development of green crystalline powder of nickel doped magnesium oxide nanoparticles by Co-precipitation method, from the mixture of nickel chloride and magnesium chloride with KOH as solvent. From the XRD results, crystalline size of the particle can be observed. Spherical structure of Ni doped MgO nanoparticles were indicated by SEM results and powdered composition of samples were obtained from FTIR. EDAX represents the peak composition of the nanoparticle. The above analytical techniques have confirmed that the Ni doped MgO nanoparticles obtained from the mixture of NiCl2 and MgCl2.

scholarly journals Mixed Oxide Layered Double Hydroxide Materials: Synthesis, Characterization and Efficient Application for Mn2+ Removal from Synthetic Wastewater

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4089
Author(s):  
Cristina Modrogan ◽  
Simona Cǎprǎrescu ◽  
Annette Madelene Dǎncilǎ ◽  
Oanamari Daniela Orbuleț ◽  
Eugeniu Vasile ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Layered Double Hydroxides ◽  
Synthetic Wastewater ◽  
Precipitation Method ◽  
Metallic Ions ◽  
Materials Synthesis ◽  
Experimental Conditions ◽  
Edx Analysis ◽  
Co Precipitation ◽  
Double Hydroxides

Magnesium–aluminum (Mg-Al) and magnesium–aluminum–nickel (Mg-Al-Ni) layered double hydroxides (LDHs) were synthesized by the co-precipitation method. The adsorption process of Mn2+ from synthetic wastewater was investigated. Formation of the layered double hydroxides and adsorption of Mn2+ on both Mg-Al and Mg-Ni-Al LDHs were observed by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectrometry (EDX) analysis. XRD patterns for prepared LDHs presented sharp and symmetrical peaks. SEM studies revealed that Mg-Al LDH and Mg-Al-Ni LDH exhibit a non-porous structure. EDX analysis showed that the prepared LDHs present uniformly spread elements. The adsorption equilibrium on these LDHs was investigated at different experimental conditions such as: Shaking time, initial Mn2+ concentration, and temperatures (10 and 20 °C). The parameters were controlled and optimized to remove the Mn2+ from synthetic wastewater. Adsorption isotherms of Mn2+ were fitted by Langmuir and Freundlich models. The obtained results indicated that the isotherm data fitted better into the Freundlich model than the Langmuir model. Adsorption capacity of Mn2+ gradually increased with temperature. The Langmuir constant (KL) value of Mg-Al LDH (0.9529 ± 0.007 L/mg) was higher than Mg-Al-Ni LDH (0.1819 ± 0.004 L/mg), at 20 °C. The final adsorption capacity was higher for Mg-Al LDH (91.85 ± 0.087%) in comparison with Mg-Al-Ni LDH (35.97 ± 0.093%), at 20 °C. It was found that the adsorption kinetics is best described by the pseudo-second-order model. The results indicated that LDHs can be considered as a potential material for adsorption of other metallic ions from wastewater.

Microstructure Characterization of Metal Mixed Oxides

MRS Advances ◽  
2017 ◽  
Vol 2 (64) ◽  
pp. 4025-4030 ◽  
Author(s):  
T. Kryshtab ◽  
H. A. Calderon ◽  
A. Kryvko
Keyword(s):  
Mixed Oxides ◽  
Profile Analysis ◽  
Atomic Resolution ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Reconstruction Procedure ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Co Precipitation

ABSTRACTThe microstructure of Ni-Mg-Al mixed oxides obtained by thermal decomposition of hydrotalcite-like compounds synthesized by a co-precipitation method has been studied by using X-ray diffraction (XRD) and atomic resolution transmission electron microscopy (TEM). XRD patterns revealed the formation of NixMg1-xO (x=0÷1), α-Al2O3 and traces of MgAl2O4 and NiAl2O4 phases. The peaks profile analysis indicated a small grain size, microdeformations and partial overlapping of peaks due to phases with different, but similar interplanar spacings. The microdeformations point out the presence of dislocations and the peaks shift associated with the presence of excess vacancies. The use of atomic resolution TEM made it possible to identify the phases, directly observe dislocations and demonstrate the vacancies excess. Atomic resolution TEM is achieved by applying an Exit Wave Reconstruction procedure with 40 low dose images taken at different defocus. The current results suggest that vacancies of metals are predominant in MgO (NiO) crystals and that vacancies of Oxygen are predominant in Al2O3 crystals.

Magnetic and morphological characterization of Bi2Fe4O9 nanoparticles synthesized via a new reverse chemical co-precipitation method

2017 ◽  
Vol 43 (15) ◽  
pp. 12120-12125 ◽  
Author(s):  
S.A.N.H. Lavasani ◽  
O. Mirzaee ◽  
H. Shokrollahi ◽  
A.K. Moghadam ◽  
M. Salami
Keyword(s):  
Morphological Characterization ◽  
Precipitation Method ◽  
Co Precipitation

Fabrication and characterization of collagen–hydroxyapatite-based composite scaffolds containing doxycycline via freeze-casting method for bone tissue engineering

2018 ◽  
Vol 33 (4) ◽  
pp. 501-513 ◽  
Author(s):  
Hossein Semyari ◽  
Majid Salehi ◽  
Ferial Taleghani ◽  
Arian Ehterami ◽  
Farshid Bastami ◽  
...  
Keyword(s):  
Cellular Response ◽  
Composite Scaffold ◽  
Precipitation Method ◽  
Structural Isomer ◽  
Freeze Casting ◽  
Hydroxyapatite Nanoparticles ◽  
Casting Method ◽  
Defect Model ◽  
Co Precipitation

In this study, hydroxyapatite nanoparticles containing 10% doxycycline, a structural isomer of tetracycline, was prepared by the co-precipitation method. It was added to collagen solution for the preparation of the scaffold with freeze-casting method in order to develop a composite scaffold with both antibacterial and osteoinductive properties for repairing bone defects. The scaffolds were evaluated regarding their morphology, porosity, degradation and cellular response. The scaffolds for further investigation were added in a rat calvaria defect model. The study showed that after eight weeks, the bone formation was relatively higher in the collagen/nano-hydroxyapatite/doxycycline group with completely filled defect when compared with other groups. Histopathological evaluation showed that the defect in the collagen/nano-hydroxyapatite/doxycycline group was fully replaced by the new bone and connective tissue. Our results provide evidence supporting the possible applicability of doxycycline-containing scaffolds for successful bone regeneration.

scholarly journals Synthesis and characterization of N, O-donor Schiff base capped ZnS NPs as a sensor for fluorescence selective detection of Fe 3+, Cr 2+ and Cd 2+ ions

2018 ◽  
Vol 4 (4) ◽  
pp. 151-162
Author(s):  
Dasari Ayodhya ◽  
Guttena Veerabhadram
Keyword(s):  
Schiff Base ◽  
Quantum Confinement ◽  
Metal Ion ◽  
Quantum Confinement Effect ◽  
Precipitation Method ◽  
Donor Ligand ◽  
Zinc Sulfide Nanoparticles ◽  
Co Precipitation ◽  
Selective Sensor

We report the simple synthesis of zinc sulfide nanoparticles (ZnSNPs) by a co-precipitation method using Schiff base, (2-[(4-methoxy-phenylimino)-methyl]-4-nitro phenol) as a capping agent. Here, Schiff base is also used as N, O-donor ligand to control the morphology of NPs and fluorescence interactions. The formation of ZnSNPs and their optical, structural, thermal properties and morphologies were studied by means of UV–vis DRS, fluorescence, FTIR, XRD, SEM, TEM, zeta potential and TGA. The optical properties and quantum confinement effect of the products were confirmed by means of spectroscopic measurements. XRD and TEM image shows that the synthesized ZnSNPs have cubic structures with a diameter of about less than 10 nm. The prepared ZnSNPs exhibited as a selective probe detection of Fe3+, Cr2+ and Cd2+ ions by fluorometrically and the emission band which disappears in the presence of increasing concentrations of Fe3+, Cr2+ and Cd2+ ions. Based on the fluorescence quenching of the NPs in the presence of metal ion of interest, the feasibility of their determinations was examined according to the Stern-Volmer equation. Our work suggested that Schiff base capped ZnSNPs could be a potential selective sensor in the detection of heavy metal ions.

Sign in / Sign up

Export Citation Format

Share Document