Advanced asymmetric supercapacitors based on Ni3(PO4)2@GO and Fe2O3@GO electrodes with high specific capacitance and high energy density

RSC Advances ◽  
2015 ◽  
Vol 5 (52) ◽  
pp. 41721-41728 ◽  
Author(s):  
Jia-Jia Li ◽  
Mao-Cheng Liu ◽  
Ling-Bin Kong ◽  
Dan Wang ◽  
Yu-Mei Hu ◽  
...  
Keyword(s):  
Energy Density ◽  
Specific Capacitance ◽  
Electrode Materials ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Asymmetric Supercapacitor ◽  
Asymmetric Supercapacitors

Ni3(PO4)2@GO and Fe2O3@GO have been successfully synthesized as electrode materials, and they have been used to assemble an asymmetric supercapacitor (Fe2O3@GO//Ni3(PO4)2@GO), which exhibited a high energy density.

A high performance asymmetric supercapacitor based on in situ prepared CuCo2O4 nanowires and PPy nanoparticles on a two-ply carbon nanotube yarn

2018 ◽  
Vol 47 (47) ◽  
pp. 17146-17152 ◽  
Author(s):  
Xiao Liang ◽  
Qiufan Wang ◽  
Yun Ma ◽  
Daohong Zhang
Keyword(s):  
Carbon Nanotube ◽  
Energy Density ◽  
Specific Capacitance ◽  
High Performance ◽  
Negative Electrode ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Asymmetric Supercapacitor

A two-ply CNT yarn asymmetric supercapacitor was fabricated by assembling a CuCo2O4 nanowire positive electrode and a PPy nanoparticle negative electrode. The full cell exhibits a high specific capacitance of 59.55 mF cm−2 and a high energy density of 0.02 mW h cm−2.

High Energy Density Asymmetric Supercapacitor Based on NiCo2S4/CNTs Hybrid and Carbon Nanotube Paper Electrodes

2019 ◽  
Vol 07 (01n02) ◽  
pp. 1950004 ◽  
Author(s):  
Muhammad Sajjad ◽  
Xu Chen ◽  
Chunxin Yu ◽  
Linlin Guan ◽  
Shuyu Zhang ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Energy Density ◽  
Specific Capacitance ◽  
Current Density ◽  
Electrode Materials ◽  
High Energy ◽  
Hybrid Nanostructures ◽  
High Energy Density ◽  
Asymmetric Supercapacitor ◽  
Charge Discharge

NiCo2S4/CNTs (NCS/CNTs) hybrid nanostructures have been synthesized by a facile one-step solvothermal method with varying content of CNTs. The structure and morphology of the synthesized NCS/CNTs hybrid revealed the formation of platelets anchored on the CNT matrix. When evaluated as electrode materials for supercapacitor, the as-synthesized NCS/CNT-1 hybrid (with 1% of CNT) manifested remarkable specific capacitance of 1690[Formula: see text]F[Formula: see text]g[Formula: see text] at the current density of 5[Formula: see text]A[Formula: see text]g[Formula: see text]. More importantly, an asymmetric supercapacitor (ASC) assembled based on NCS/CNT-1 as positive electrode and carbon nanotube paper (CNP) as a negative electrode delivered high energy density of 58[Formula: see text]Wh[Formula: see text]kg[Formula: see text] under power density of 8[Formula: see text]kW[Formula: see text]kg[Formula: see text]. Furthermore, the ASC device exhibited high cycling stability and 77.7% of initial specific capacitance retention after 7000 charge–discharge cycles at a current density of 8[Formula: see text]A[Formula: see text]g[Formula: see text]. The large enhancement in the electrochemical performance is attributed to the benefits of the nanostructured architecture, including good mechanical stability, high electrical conductivity as well as buffering for the volume changes during charge–discharge process. These convincing results show that NCS/CNTs hybrid nanostructures are promising electrode materials for high energy density supercapacitors (SCs).

Integrated copper–nickel oxide mesoporous nanowire arrays for high energy density aqueous asymmetric supercapacitors

2016 ◽  
Vol 1 (2) ◽  
pp. 150-155 ◽  
Author(s):  
Ruizhi Li ◽  
Zhijun Lin ◽  
Xin Ba ◽  
Yuanyuan Li ◽  
Ruimin Ding ◽  
...  
Keyword(s):  
Energy Density ◽  
Nickel Oxide ◽  
Specific Capacitance ◽  
High Performance ◽  
Nanowire Array ◽  
High Specific Capacitance ◽  
High Energy ◽  
Nanowire Arrays ◽  
High Energy Density ◽  
Asymmetric Supercapacitors

An integrated (Cu,Ni)O mesoporous nanowire array that delivers a high specific capacitance has been used to construct high-performance aqueous asymmetric supercapacitors of (Cu,Ni)O(+)//AC(−).

The perfect matching between the low-cost Fe2O3 nanowire anode and the NiO nanoflake cathode significantly enhances the energy density of asymmetric supercapacitors

2015 ◽  
Vol 3 (12) ◽  
pp. 6662-6670 ◽  
Author(s):  
Qianqiu Tang ◽  
Wenqiang Wang ◽  
Gengchao Wang
Keyword(s):  
Energy Density ◽  
Specific Capacitance ◽  
Perfect Matching ◽  
Low Cost ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Asymmetric Supercapacitors

A novel low-cost anode of homogenous Fe2O3 nanowires on CFP was developed, achieving a high specific capacitance in 0 to −1.35 V. Matching it with the NiO nanoflake cathode, an extremely high energy density of 105 W h kg−1 is obtained at 1400 W kg−1.

scholarly journals Fabrication of Hierarchical NiMoO4/NiMoO4 Nanoflowers on Highly Conductive Flexible Nickel Foam Substrate as a Capacitive Electrode Material for Supercapacitors with Enhanced Electrochemical Performance

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1143 ◽  
Author(s):  
Anil Yedluri ◽  
Tarugu Anitha ◽  
Hee-Je Kim
Keyword(s):  
Energy Density ◽  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Nickel Foam ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Charge Discharge

Hierarchical NiMoO4/NiMoO4 nanoflowers were fabricated on highly conductive flexible nickel foam (NF) substrates using a facile hydrothermal method to achieve rapid charge-discharge ability, high energy density, long cycling lifespan, and higher flexibility for high-performance supercapacitor electrode materials. The synthesized composite electrode material, NF/NiMoO4/NiMoO4 with a nanoball-like NF/NiMoO4 structure on a NiMoO4 surface over a NF substrate, formed a three-dimensional interconnected porous network for high-performance electrodes. The novel NF/NiMoO4/NiMoO4 nanoflowers not only enhanced the large surface area and increased the electrochemical activity, but also provided an enhanced rapid ion diffusion path and reduced the charge transfer resistance of the entire electrode effectively. The NF/NiMoO4/NiMoO4 composite exhibited significantly improved supercapacitor performance in terms of a sustained cycling life, high specific capacitance, rapid charge-discharge capability, high energy density, and good rate capability. Electrochemical analysis of the NF/NiMoO4/NiMoO4 nanoflowers fabricated on the NF substrate revealed ultra-high electrochemical performance with a high specific capacitance of 2121 F g−1 at 12 mA g−1 in a 3 M KOH electrolyte and 98.7% capacitance retention after 3000 cycles at 14 mA g−1. This performance was superior to the NF/NiMoO4 nanoball electrode (1672 F g−1 at 12 mA g−1 and capacitance retention 93.4% cycles). Most importantly, the SC (NF/NiMoO4/NiMoO4) device displayed a maximum energy density of 47.13 W h kg−1, which was significantly higher than that of NF/NiMoO4 (37.1 W h kg−1). Overall, the NF/NiMoO4/NiMoO4 composite is a suitable material for supercapacitor applications.

scholarly journals Nanostructure selenium compounds as pseudocapacitive electrodes for high-performance asymmetric supercapacitor

2018 ◽  
Vol 5 (1) ◽  
pp. 171186 ◽  
Author(s):  
Guofu Ma ◽  
Fengting Hua ◽  
Kanjun Sun ◽  
Enke Fenga ◽  
Hui Peng ◽  
...  
Keyword(s):  
Electrode Materials ◽  
Rate Capability ◽  
Negative Electrode ◽  
High Specific Capacitance ◽  
High Energy ◽  
Cycling Stability ◽  
High Energy Density ◽  
Storage Device ◽  
Asymmetric Supercapacitor ◽  
Capacitance Performance

The electrochemical performance of an energy conversion and storage device like the supercapacitor mainly depends on the microstructure and morphology of the electrodes. In this paper, to improve the capacitance performance of the supercapacitor, the all-pseudocapacitive electrodes of lamella-like Bi 18 SeO 29 /BiSe as the negative electrode and flower-like Co 0.85 Se nanosheets as the positive electrode are synthesized by using a facile low-temperature one-step hydrothermal method. The microstructures and morphology of the electrode materials are carefully characterized, and the capacitance performances are also tested. The Bi 18 SeO 29 /BiSe and Co 0.85 Se have high specific capacitance (471.3 F g –1 and 255 F g –1 at 0.5 A g –1 ), high conductivity, outstanding cycling stability, as well as good rate capability. The assembled asymmetric supercapacitor completely based on the pseudocapacitive electrodes exhibits outstanding cycling stability (about 93% capacitance retention after 5000 cycles). Moreover, the devices exhibit high energy density of 24.2 Wh kg –1 at a power density of 871.2 W kg –1 in the voltage window of 0–1.6 V with 2 M KOH solution.

scholarly journals Glycerolized Li+ Ion Conducting Chitosan-Based Polymer Electrolyte for Energy Storage EDLC Device Applications with Relatively High Energy Density

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1433 ◽  
Author(s):  
Ahmed S. F. M. Asnawi ◽  
Shujahadeen B. Aziz ◽  
Muaffaq M. Nofal ◽  
Muhamad H. Hamsan ◽  
Mohamad A. Brza ◽  
...  
Keyword(s):  
Energy Density ◽  
Polymer Electrolyte ◽  
Specific Capacitance ◽  
Power Density ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Equivalent Series Resistance ◽  
Ion Conducting ◽  
High Dielectric

In this study, the solution casting method was employed to prepare plasticized polymer electrolytes of chitosan (CS):LiCO2CH3:Glycerol with electrochemical stability (1.8 V). The electrolyte studied in this current work could be established as new materials in the fabrication of EDLC with high specific capacitance and energy density. The system with high dielectric constant was also associated with high DC conductivity (5.19 × 10−4 S/cm). The increase of the amorphous phase upon the addition of glycerol was observed from XRD results. The main charge carrier in the polymer electrolyte was ion as tel (0.044) < tion (0.956). Cyclic voltammetry presented an almost rectangular plot with the absence of a Faradaic peak. Specific capacitance was found to be dependent on the scan rate used. The efficiency of the EDLC was observed to remain constant at 98.8% to 99.5% up to 700 cycles, portraying an excellent cyclability. High values of specific capacitance, energy density, and power density were achieved, such as 132.8 F/g, 18.4 Wh/kg, and 2591 W/kg, respectively. The low equivalent series resistance (ESR) indicated that the EDLC possessed good electrolyte/electrode contact. It was discovered that the power density of the EDLC was affected by ESR.

A three-dimensional graphene framework-enabled high-performance stretchable asymmetric supercapacitor

2018 ◽  
Vol 6 (4) ◽  
pp. 1802-1808 ◽  
Author(s):  
Ke Li ◽  
Yanshan Huang ◽  
Jingjing Liu ◽  
Mansoor Sarfraz ◽  
Phillips O. Agboola ◽  
...  
Keyword(s):  
Energy Density ◽  
High Performance ◽  
Three Dimensional ◽  
High Energy ◽  
Cycling Stability ◽  
High Energy Density ◽  
Asymmetric Supercapacitor ◽  
Asymmetric Supercapacitors ◽  
Superior Cycling Stability

Three-dimensional graphene frameworks enable the development of stretchable asymmetric supercapacitors with a record high energy density of 77.8 W h kg−1, and also excellent stretchability and superior cycling stability.

Sign in / Sign up

Export Citation Format

Share Document