Al-Based coordination polymer nanotubes: simple preparation, post-modification and application in Fe3+ ions sensing

2017 ◽  
Vol 46 (16) ◽  
pp. 5373-5383 ◽  
Author(s):  
Xiaoyao Dao ◽  
Yonghong Ni

Aluminum-based coordination polymers, MIL-110(Al) nanotubes, were successfully prepared from a mixed solution of methanol and ethanol with the volume ratio of 10 : 10 at room temperature in the absence of any template or surfactant; AlCl3 and sodium 1,3,5-benzenetricarboxylate (Na3BTC) were employed as the initial reactants.

CrystEngComm ◽  
2021 ◽  
Author(s):  
Akhtaruz Zaman ◽  
Baishakhi Pal ◽  
Samim Khan ◽  
Basudeb Dutta ◽  
Sanobar Naaz ◽  
...  

A new Cd(II)-based two-dimensional coordination polymer (2D CP) [{Cd2(cis-1,4-chdc)2(1,10-phen)2}۰5H2O]n (1) has been synthesized at room temperature by slow diffusion technique using 1,4-cyclohexanedicarboxylic acid (1,4-H2chdc) and 1,10-phenanthroline (1,10-phen) mixed-ligand system. The...


Author(s):  
Mohammad Misbah Khunur ◽  
Yuniar Ponco Prananto

Cobalt(II)-tartrate hydrate coordination polymer is successfully crystallisedfrom aqueous solution at room temperature. Unlike previous methods, diammonium tartrate was used and reacted directly with an aqueous solution of cobalt(II). Single crystal X-ray and ATR-IR analyses were performed toward the synthesized crystal. The crystal structure displaysa (6,3) 2D sheet which then grow into a 3D hydrogen-bonded network. Tetra- and hexa-dentate dianionic tartaric ligands are observed in the crystal structure, in which the hexadentate ligand connects four different cobalt centres. This method is considered feasible, affordable, and simple for the production of functional polymeric cobalt(II)-tartrate hydrate. Copyright © 2018 BCREC Group. All rights reservedReceived: 17th July 2017; Revised: 30th October 2017; Accepted: 30th October 2017; Available online:   11st June 2018; Published regularly: 1st August 2018How to Cite: Khunur, M.M., Prananto, Y.P. (2018). Synthesis and Structure of 2D Cobalt(II)-tartrate Hydrate Coordination Polymers Crystallised from Aqueous Solution. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (2): 213-219 (doi:10.9767/bcrec.13.2.1342.213-219)


Nanoscale ◽  
2021 ◽  
Author(s):  
Qinghai Ma ◽  
Fang Cui ◽  
Mufei Liu ◽  
Jia jia Zhang ◽  
Tieyu Cui

The large-scale Ni-based nano-sized coordination polymers (Ni-nCPs) are facilely constructed by a self-assembled approach at room temperature and atmosphere pressure. In this strategy, we only use environmentally friendly solvents of...


Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 1101
Author(s):  
Anirban Karmakar ◽  
Anup Paul ◽  
Elia Pantanetti Sabatini ◽  
M. Fátima C. Guedes da Silva ◽  
Armando J. L. Pombeiro

The new coordination polymers (CPs) [Zn(μ-1κO1:1κO2-L)(H2O)2]n·n(H2O) (1) and [Cd(μ4-1κO1O2:2κN:3,4κO3-L)(H2O)]n·n(H2O) (2) are reported, being prepared by the solvothermal reactions of 5-{(pyren-4-ylmethyl)amino}isophthalic acid (H2L) with Zn(NO3)2.6H2O or Cd(NO3)2.4H2O, respectively. They were synthesized in a basic ethanolic medium or a DMF:H2O mixture, respectively. These compounds were characterized by single-crystal X-ray diffraction, FTIR spectroscopy, thermogravimetric and elemental analysis. The single-crystal X-ray diffraction analysis revealed that compound 1 is a one dimensional linear coordination polymer, whereas 2 presents a two dimensional network. In both compounds, the coordinating ligand (L2−) is twisted due to the rotation of the pyrene ring around the CH2-NH bond. In compound 1, the Zn(II) metal ion has a tetrahedral geometry, whereas, in 2, the dinuclear [Cd2(COO)2] moiety acts as a secondary building unit and the Cd(II) ion possesses a distorted octahedral geometry. Recently, several CPs have been explored for the cyanosilylation reaction under conventional conditions, but microwave-assisted cyanosilylation of aldehydes catalyzed by CPs has not yet been well studied. Thus, we have tested the solvent-free microwave-assisted cyanosilylation reactions of different aldehydes, with trimethylsilyl cyanide, using our synthesized compounds, which behave as highly active heterogeneous catalysts. The coordination polymer 1 is more effective than 2, conceivably due to the higher Lewis acidity of the Zn(II) than the Cd(II) center and to a higher accessibility of the metal centers in the former framework. We have also checked the heterogeneity and recyclability of these coordination polymers, showing that they remain active at least after four recyclings.


2020 ◽  
Vol 44 (41) ◽  
pp. 17970-17975
Author(s):  
Larysa Okhrimenko ◽  
Cynthia Cibaka Ndaya ◽  
Alexandra Fateeva ◽  
Gilles Ledoux ◽  
Aude Demessence

Post-modification and ligand exchange reactions from 1D or 2D gold thiolate coordination polymers occur through a dissolution–recrystallization pathway.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nishchay A. Isaac ◽  
Johannes Reiprich ◽  
Leslie Schlag ◽  
Pedro H. O. Moreira ◽  
Mostafa Baloochi ◽  
...  

AbstractThis study demonstrates the fabrication of self-aligning three-dimensional (3D) platinum bridges for ammonia gas sensing using gas-phase electrodeposition. This deposition scheme can guide charged nanoparticles to predetermined locations on a surface with sub-micrometer resolution. A shutter-free deposition is possible, preventing the use of additional steps for lift-off and improving material yield. This method uses a spark discharge-based platinum nanoparticle source in combination with sequentially biased surface electrodes and charged photoresist patterns on a glass substrate. In this way, the parallel growth of multiple sensing nodes, in this case 3D self-aligning nanoparticle-based bridges, is accomplished. An array containing 360 locally grown bridges made out of 5 nm platinum nanoparticles is fabricated. The high surface-to-volume ratio of the 3D bridge morphology enables fast response and room temperature operated sensing capabilities. The bridges are preconditioned for ~ 24 h in nitrogen gas before being used for performance testing, ensuring drift-free sensor performance. In this study, platinum bridges are demonstrated to detect ammonia (NH3) with concentrations between 1400 and 100 ppm. The sensing mechanism, response times, cross-sensitivity, selectivity, and sensor stability are discussed. The device showed a sensor response of ~ 4% at 100 ppm NH3 with a 70% response time of 8 min at room temperature.


2021 ◽  
Author(s):  
Katerina A. Vinogradova ◽  
Nikita Shekhovtsov ◽  
Alexey Sergeevich Berezin ◽  
Taisiya Sukhikh ◽  
Maxim I. Rogovoy ◽  
...  

First examples of copper(I) complexes with 2-(alkylsulfanyl)pyrimidine ligands have been synthesized. Reactions of copper(I) iodide with 2-(methylsulfanyl)pyrimidine (L1) in various metal-to-ligand molar ratios in MeCN afford a ladder-type coordination polymer...


Sign in / Sign up

Export Citation Format

Share Document