scholarly journals Green approach towards corrosion inhibition of carbon steel in produced oilfield water using lemongrass extract

RSC Advances ◽  
2017 ◽  
Vol 7 (72) ◽  
pp. 45241-45251 ◽  
Author(s):  
M. A. Deyab ◽  
M. M. Osman ◽  
A. E. Elkholy ◽  
F. El-Taib Heakal
Keyword(s):  
Weight Loss ◽  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Cymbopogon Citratus ◽  
Green Approach ◽  
Weight Loss Method ◽  
Loss Method ◽  
Oilfield Water

The anti-corrosion action of lemongrass (cymbopogon citratus) extract (LGE) was evaluated for carbon steel in produced oilfield water using weight loss method and electrochemical impedance spectroscopy (EIS).

scholarly journals CHAETOMORPHA ANTENNIA EXTRACT AS A GREEN INHIBITOR FOR CORROSION OF BRASS IN 0.1 N PHOSPHORIC ACID SOLUTION

2015 ◽  
Vol 12 (1) ◽  
pp. 68-78 ◽  
Author(s):  
R Kumar ◽  
V Chandrasekaran
Keyword(s):  
Weight Loss ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Phosphoric Acid ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Weight Loss Method ◽  
Brass Surface ◽  
Loss Method ◽  
Spectroscopy Studies

The effect of marine algae Chaetomorpha antennia extract on corrosion inhibition of brass in phosphoric acid was investigated by weight-loss method, potentiodynamic polarization and electrochemical impedance spectroscopy studies. The inhibition efficiency is found to increase with increasing concentration of extract and decreases with rise in temperature. The activation energy, thermodynamic parameters (free energy, enthalpy and entropy change) and kinetic parameters (rate constant and half-life) for inhibition process were calculated. These thermodynamic and kinetic parameters indicate a strong interaction between the inhibitor and the brass surface. The inhibition is assumed to occur via adsorption of inhibitor molecules on the brass surface, which obeys Temkin adsorption isotherm. The adsorption of inhibitor on the brass surface is exothermic, physical, and spontaneous, follows first order kinetics. The polarization measurements showed that the inhibitor behaves as a mixed type inhibitor and the higher inhibition surface coverage on the brass was predicted. Inhibition efficiency values were found to show good trend with weight-loss method, potentiodynamic polarization and electrochemical impedance spectroscopy studies. SEM was carried out to ascertain the inhibitive nature of the algal extract on the brass surface.

scholarly journals Corrosion inhibition, surface adsorption and computational studies of Momordica charantia extract: a sustainable and green approach

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Rajesh Haldhar ◽  
Dwarika Prasad ◽  
Divya Kamboj ◽  
Savas Kaya ◽  
Omar Dagdag ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Spectroscopic Technique ◽  
Momordica Charantia ◽  
Green Approach ◽  
Carbon Steel Surface ◽  
Weight Loss Method ◽  
Loss Method ◽  
Inhibitory Molecules

AbstractThe aerial parts extract of Momordica charantia plant were used for the corrosion resistance of carbon steel in the acidic medium (0.5 M H2SO4) utilizing weight loss method, Tafel and Electrochemical Impedance Spectroscopy. The state of mixed inhibitor adsorption on the carbon steel surface is shown by potentiodynamic polarization. M. charantia achieved the extraordinary inhibition efficiency of 93.51% at 500 mg/L of inhibitor concentration. Scanning electron microscopy and atomic force microscopy were used to know about the thin layer which was formed on the surface of carbon steel for its protection from corrosion and the adsorption of inhibitor was shown by UV–vis. spectroscopic technique. Fourier Transform Infrared Spectroscopy technique confirmed the existence of functional groups and the heteroatoms exhibit in the inhibitor. Adsorbance by the inhibitory molecules on the carbon steel surface followed the Langmuir adsorption isotherm. Hypothetical investigations (computational) showed a very valuable report. All acquired outcomes ensure that M. charantia extract can procedure an effectual preventing layer and restrict the corrosion procedure.

scholarly journals Novel pyrimidine-bichalcophene derivatives as corrosion inhibitors for copper in 1 M nitric acid solution

RSC Advances ◽  
2021 ◽  
Vol 11 (41) ◽  
pp. 25314-25333
Author(s):  
Mai A. Khaled ◽  
Mohamed A. Ismail ◽  
Ahmed. A. El-Hossiany ◽  
Abd El-Aziz S. Fouda
Keyword(s):  
Weight Loss ◽  
Electrochemical Impedance Spectroscopy ◽  
Nitric Acid ◽  
Impedance Spectroscopy ◽  
Acid Solution ◽  
Nitric Acid Solution ◽  
Potentiodynamic Polarization ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Pyrimidine Derivatives

This study targets the investigation of three pyrimidine derivatives (MA-1230, MA-1231, MA-1232) for the prevention of corrosion on copper in 1 M HNO3via weight loss (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) techniques.

The effect of an N-heterocyclic compound on corrosion inhibition of J55 steel in sweet corrosive medium

2019 ◽  
Vol 43 (16) ◽  
pp. 6303-6313 ◽  
Author(s):  
Ambrish Singh ◽  
K. R. Ansari ◽  
M. A. Quraishi ◽  
Savas Kaya ◽  
Priyabrata Banerjee
Keyword(s):  
Carbon Dioxide ◽  
Weight Loss ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Corrosion Inhibition ◽  
Heterocyclic Compound ◽  
Potentiodynamic Polarization ◽  
Corrosive Medium ◽  
Electrochemical Impedance ◽  
Nacl Solution

The corrosion inhibition behavior of a naphthoxazinone derivative 1-phenyl-1,2-dihydronaphtho[1,2-e][1,3]oxazin-3-one (PNO) on J55 steel in 3.5 wt% NaCl solution saturated with carbon dioxide was evaluated using weight loss, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization.

scholarly journals Microbial Corrosion of API 5L X-70 Carbon Steel by ATCC 7757 and Consortium of Sulfate-Reducing Bacteria

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Arman Abdullah ◽  
Nordin Yahaya ◽  
Norhazilan Md Noor ◽  
Rosilawati Mohd Rasol
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Rate ◽  
Sulfate Reducing Bacteria ◽  
Desulfovibrio Vulgaris ◽  
Corrosion Morphology ◽  
Sulfate Reducing ◽  
Weight Loss Method ◽  
Loss Method ◽  
Reducing Bacteria

Various cases of accidents involving microbiology influenced corrosion (MIC) were reported by the oil and gas industry. Sulfate reducing bacteria (SRB) have always been linked to MIC mechanisms as one of the major causes of localized corrosion problems. In this study, SRB colonies were isolated from the soil in suspected areas near the natural gas transmission pipeline in Malaysia. The effects of ATCC 7757 and consortium of isolated SRB upon corrosion on API 5L X-70 carbon steel coupon were investigated using a weight loss method, an open circuit potential method (OCP), and a potentiodynamic polarization curves method in anaerobic conditions. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were then used to determine the corrosion morphology in verifying the SRB activity and corrosion products formation. Results from the study show that the corrosion rate (CR) of weight loss method for the isolated SRB is recorded as 0.2017 mm/yr compared to 0.2530 mm/yr for ATCC 7757. The Tafel plot recorded the corrosion rate of 0.3290 mm/yr for Sg. Ular SRB and 0.2500 mm/yr forDesulfovibrio vulgaris. The results showed that the consortia of isolated SRB were of comparable effects and features with the single ATCC 7757 strain.

PENGARUH BASIC SEDIMENT AND WATER TERHADAP LAJU KOROSI PIPA X52 DAN A53 PADA MEDIA OIL SLUDGE.

ROTOR ◽  
2017 ◽  
Vol 10 (1) ◽  
pp. 13
Author(s):  
Naufan Arviansyah ◽  
Sumarji Sumarji ◽  
Digdo Listyadi Setyawan
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Rate ◽  
Low Carbon Steel ◽  
Measuring Method ◽  
Oil Sludge ◽  
Uniform Corrosion ◽  
Low Carbon ◽  
Weight Loss Method ◽  
Loss Method

This research have a purpuse to know corrosion rate in pipe X52 and A53 at oil sludge media caused BS and W. Corrosion is a damage of metal that occurs because reaction between metal with environtment and produce unwanted of corrosion product. Pipe X52 and A53 is a type of low carbon steel that use for fluid transportation system in industry. Oil sludge is a sediment of crude oil from main gathering storage and containing variouses elements. Oil sludge have a one of element is Basic Sediment and Water that is can make corrosion happen to distribution pipes. Measuring Method used in this research is weight loss method. The result of corrosion rate in Oil Sludge media containing 30,17% BS and W for pipe A53 is 1,64 x 10-2 mmpy and the result for pipa X52 is 2,47 x 10-2 mmpy. The result of corrosion rate in Oil Sludge media containing 60,67% BS and W for pipe A53 is 2,12 x 10-2 mmpy and for pipe X52 the result is 3,13 x 10-2 mmpy. The result of this research showed pipe A53 have more resistance than pipe X52. The corrosion is classified as uniform corrosion. Keywords : A53, Weight Loss, Oil Sludge, X52.

scholarly journals Inhibitive Effect by Acid Extract of Ficus Exasperata Leaves on the Sulphuric Acid Corrosion of Mild Steel

2009 ◽  
Vol 6 (s1) ◽  
pp. S189-S194 ◽  
Author(s):  
N. S. Patel ◽  
S. Jauhari ◽  
G. N. Mehta
Keyword(s):  
Weight Loss ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Electrochemical Impedance ◽  
Electron Microscopic ◽  
Scanning Electron Microscopic ◽  
Microscopic Studies ◽  
Scanning Electron

Extract ofFicus exasperataleaves was investigated as corrosion inhibitor of mild steel in 1 N H2SO4using conventional weight loss, electrochemical polarizations, electrochemical impedance spectroscopy and scanning electron microscopic studies. The weight loss results showed that the extract ofFicus exasperatais excellent corrosion inhibitor. Electrochemical polarizations data revealed the mixed mode of inhibition. The results of electrochemical impedance spectroscopy shows that the change in the impedance parameters, charge transfer resistance and double layer capacitance, with the change in concentration of the extract is due to the adsorption of active molecules leading to the formation of a protective layer on the surface of mild steel. Scanning electron microscopic studies provided the confirmatory evidence of improved surface condition, due to the adsorption, for the corrosion protection.

Crevice Corrosion Behaviors of X52 Carbon Steel in Chloride Containing Solutions

2013 ◽  
Vol 652-654 ◽  
pp. 1432-1435
Author(s):  
Qian Hu ◽  
Jing Liu ◽  
Jie Zhang ◽  
Feng Huang ◽  
Xing Peng Guo
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Impedance Spectroscopy ◽  
Crevice Corrosion ◽  
Electrochemical Noise ◽  
Electrochemical Impedance ◽  
Corrosion Process ◽  
Nacl Solution ◽  
Concentration Difference ◽  
Corrosion Behaviors

The crevice corrosion behaviors of X52 carbon steel in two typical Cl--containing solutions were investigated by electrochemical noise and electrochemical impedance spectroscopy. Results show that oxygen concentration difference leads to the coupled current in NaCl + NaHCO3 solution while HAc concentration difference causes the coupled current in NaCl solution saturated with CO2 in the presence of HAc. There exists an apparent incubation stage during the crevice corrosion process of X52 carbon steel in the former. However, no obvious incubation period of crevice corrosion can be observed in the latter. Micrography shows that the crevice corrosion occurs indeed and the corrosion inside the crevice is not uniform.

scholarly journals Nano-TiO2 Phosphate Conversion Coatings – A Chemical Approach

2018 ◽  
Vol 4 (1) ◽  
pp. 47-54 ◽  
Author(s):  
Nilesh S. Bagal ◽  
Vaibhav S. Kathavate ◽  
Pravin P. Deshpande
Keyword(s):  
Corrosion Resistance ◽  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Impedance Spectroscopy ◽  
Zinc Phosphate ◽  
Electrochemical Impedance ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Phosphate Coatings ◽  
Coating Weight

AbstractThe present study aims at deposition of zinc phosphate coatings on low carbon steel with incorporated nano- TiO2 particles by chemical phosphating method. The coated low carbon steel samples were assessed in corrosion studies using electrochemical impedance spectroscopy and potentiodynamic polarization techniques (Tafel) in 3.5% NaCl solution. Morphology and chemical composition of the coatings were analyzed by scanning electron microscopy and energy dispersive X-ray spectroscopy in order to observe growth of coating. Significant variations in the coating weight, porosity and corrosion resistance were observed with the addition of nano- TiO2 in the phosphating bath. Corrosion rate of nano-TiO2 chemical phosphate coated samples was found to be 3.5 milli inches per year which was 3 times less than the normal phosphate-coated sample (8 mpy). Electrochemical impedance spectroscopy studies reveal reduction of porosity of nano-TiO2 phosphate coated samples. It was found that nano-TiO2 particles in the phosphating solution yielded uniform phosphate coatings of higher coating weight, fewer defects and enhanced corrosion resistance than the normal zinc phosphate coatings (developed using normal phosphating bath).

The Effect of Corrosion Inhibitor in Hydrofluoric Acid Medium

2013 ◽  
Vol 750-752 ◽  
pp. 2258-2262 ◽  
Author(s):  
Wei Ming Wu ◽  
Ding Li ◽  
Hai Yan Du
Keyword(s):  
Weight Loss ◽  
Corrosion Resistance ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Mild Steel ◽  
Hydrofluoric Acid ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Potassium Thiocyanate ◽  
Inhibition Effect

The experiments were done to find some good corrosion inhibitors for mild steel in 5% HF solution by the method of weight loss and electrochemistry including polarization curves and electrochemical impedance spectroscopy (EIS). Results show that the thiourea, potassium thiocyanate, and hexamethylenetetramine have good inhibition effect for mild steel in 5% HF solution, especially potassium thiocyanate and thiourea. Their corrosion resistance was greatly enhanced in the presence of tested inhibitor. Thiourea is an anodic type inhibitor and its inhibition efficiencies up to 99.88% can be obtained. Equivalent circuit of the investigated system was suggested.

Sign in / Sign up

Export Citation Format

Share Document