Potential for manganese biofouling in water transmission lines using model reactors

2018 ◽  
Vol 4 (6) ◽  
pp. 761-772 ◽  
Author(s):  
Nicole E. Allward ◽  
Brittany S. Gregory ◽  
Amina K. Sotddart ◽  
Graham A. Gagnon
Keyword(s):  
Water Supply ◽  
Transmission Line ◽  
Manganese Oxide ◽  
Transmission Lines ◽  
Water Transmission

Biologically mediated manganese oxide accumulation was observed in a water supply plant transmission line. A novel, putative manganese oxidizing bacterium,Candidatus Koribacter, was identified.

Composite right/left-handed transmission line with array of thermocouples for generating terahertz radiation

2020 ◽  
Vol 92 (2) ◽  
pp. 20502
Author(s):  
Behrokh Beiranvand ◽  
Alexander S. Sobolev ◽  
Anton V. Kudryashov
Keyword(s):  
Transmission Line ◽  
Terahertz Radiation ◽  
Transmission Lines ◽  
Software Package ◽  
Optical Pulses ◽  
Capacitively Coupled ◽  
Voltage Difference ◽  
Left Handed ◽  
Microwave Transmission ◽  
Commercial Software Package

We present a new concept of the thermoelectric structure that generates microwave and terahertz signals when illuminated by femtosecond optical pulses. The structure consists of a series array of capacitively coupled thermocouples. The array acts as a hybrid type microwave transmission line with anomalous dispersion and phase velocity higher than the velocity of light. This allows for adding up the responces from all the thermocouples in phase. The array is easily integrable with microstrip transmission lines. Dispersion curves obtained from both the lumped network scheme and numerical simulations are presented. The connection of the thermocouples is a composite right/left-handed transmission line, which can receive terahertz radiation from the transmission line ports. The radiation of the photon to the surface of the thermocouple structure causes a voltage difference with the bandwidth of terahertz. We examined a lossy composite right/left-handed transmission line to extract the circuit elements. The calculated properties of the design are extracted by employing commercial software package CST STUDIO SUITE.

scholarly journals Time-Multiplexed Self-Powered Wireless Current Sensor for Power Transmission Lines

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1561
Author(s):  
Hao Chen ◽  
Zhongnan Qian ◽  
Chengyin Liu ◽  
Jiande Wu ◽  
Wuhua Li ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Transmission Line ◽  
Transmission Lines ◽  
Power Transmission ◽  
Current Measurement ◽  
Current Sensor ◽  
Power Transmission Line ◽  
Power Transmission Lines ◽  
Current Sensing ◽  
Self Powered

Current measurement is a key part of the monitoring system for power transmission lines. Compared with the conventional current sensor, the distributed, self-powered and contactless current sensor has great advantages of safety and reliability. By integrating the current sensing function and the energy harvesting function of current transformer (CT), a time-multiplexed self-powered wireless sensor that can measure the power transmission line current is presented in this paper. Two operating modes of CT, including current sensing mode and energy harvesting mode, are analyzed in detail. Through the design of mode-switching circuit, harvesting circuit and measurement circuit are isolated using only one CT secondary coil, which eliminates the interference between energy harvesting and current measurement. Thus, the accurate measurement in the current sensing mode and the maximum energy collection in the energy harvesting mode are both realized, all of which simplify the online power transmission line monitoring. The designed time-multiplexed working mode allows the sensor to work at a lower transmission line current, at the expense of a lower working frequency. Finally, the proposed sensor is verified by experiments.

Study on the characteristics of secondary arc current of UHV high compensation degree TCSC line under the fine-tuning mode

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Baina He ◽  
Yadi Xie ◽  
Jingru Zhang ◽  
Nirmal-Kumar C. Nair ◽  
Xingmin He ◽  
...  
Keyword(s):  
Transmission Line ◽  
Transmission Lines ◽  
Stability Margin ◽  
Transmission Capacity ◽  
Fine Tuning ◽  
Series Compensation ◽  
Arc Current ◽  
Compensation Device ◽  
The Stability ◽  
Recovery Voltage

Abstract In the transmission line, the series compensation device is often used to improve the transmission capacity. However, when the fixed series capacitor (FSC) is used in high compensation series compensation device, the stability margin cannot meet the requirements. Therefore, thyristor controlled series compensator (TCSC) is often installed in transmission lines to improve the transmission capacity of the line and the stability of the system. For cost considerations, the hybrid compensation mode of FSC and TCSC is often adopted. However, when a single-phase grounding fault occurs in a transmission line with increased series compensation degree, the unreasonable distribution of FSC and TCSC will lead to the excessive amplitude of secondary arc current, which is not conducive to rapid arc extinguishing. To solve this problem, this paper is based on 1000 kV Changzhi-Nanyang-Jingmen UHV series compensation transmission system, using PSCAD simulation program to established UHV series compensation simulation model, The variation law of secondary arc current and recovery voltage during operation in fine tuning mode after adding TCSC to UHV transmission line is analyzed, and the effect of increasing series compensation degree on secondary arc current and recovery voltage characteristics is studied. And analyze the secondary arc current and recovery voltage when using different FSC and TCSC series compensation degree schemes, and get the most reasonable series compensation configuration scheme. The results show that TCSC compensation is more beneficial to arc extinguishing under the same series compensation. Compared with several series compensation schemes, it is found that with the increase of the proportion of TCSC, the amplitude of secondary arc current and recovery voltage vary greatly. Considering various factors, the scheme that is more conducive to accelerating arc extinguishing is chosen.

Development on Environmental Geotechnology for Overhead Transmission Line Foundation Engineering in China

2012 ◽  
Vol 610-613 ◽  
pp. 2813-2818
Author(s):  
Xian Long Lu ◽  
Zeng Zhen Qian
Keyword(s):  
Transmission Line ◽  
Environmental Protection ◽  
Transmission Lines ◽  
Water Conservation ◽  
Design Method ◽  
Foundation Engineering ◽  
Foundation Construction ◽  
Overhead Transmission Line ◽  
Tower Foundation ◽  
Soil And Water

This paper presents the concept and the fundamental issues and the development on the environmental geotechnology in transmission lines foundation engineering. Namely, environmental geotechnology and theory is to study the restriction effects of environment on the transmission line routes, foundation selection and reliability, to predict the results of transmission line foundation construction on the environment, and to study on countermeasures of environmental protection in transmission foundation engineering. And then, from the above three aspects, the design method combined strength and displacement for tower foundation, the selection on foundation types and technical scheme for transmission line tower, and the countermeasures for soil and water conservation, the author introduces the development and practice of environmental geotechnology for transmission lines foundation engineering in China.

Study the Effect of Radio Interference of the EHV Transmission Line on GNSS Signals

2013 ◽  
Vol 805-806 ◽  
pp. 851-854
Author(s):  
Zhi Ge Jia ◽  
Zhao Sheng Nie ◽  
Wei Wang ◽  
Xiao Guan ◽  
Di Jin Wang
Keyword(s):  
Transmission Line ◽  
Transmission Lines ◽  
Internal Noise ◽  
Field Testing ◽  
Satellite System ◽  
Field Analysis ◽  
Radio Interference ◽  
Gnss Receiver ◽  
Global Navigation Satellite ◽  
Gnss Data

This work describes the field testing process of Global Navigation Satellite System (GNSS) receiver under 220KV, 500KV UHV transmission line and standard calibration field. Analysis for GNSS data results shows that the radio interference generated by EHV transmission lines have no effect on GNSS receiver internal noise levels and valid GNSS observation rate. Within 50 meters of the EHV transmission lines, the multi-path effects (mp1 and mp2 value) significantly exceeded the normal range and becomes larger with the increase of the voltage .outside 50 meters of the EHV transmission line, the multi-path effects have almost no effect on the high-precision GNSS observations.

Research on mechanism configuration and dynamic characteristics for multi-split transmission line mobile robot

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wei Jiang ◽  
Yating Shi ◽  
Dehua Zou ◽  
Hongwei Zhang ◽  
Hong Jun Li
Keyword(s):  
Mobile Robot ◽  
Transmission Line ◽  
Dynamic Model ◽  
Dynamic Characteristics ◽  
Transmission Lines ◽  
Dynamic Models ◽  
Working Environment ◽  
Joint Torque ◽  
Content Type ◽  
Working Space

Purpose The purpose of this paper is to achieve the optimal system design of a four-wheel mobile robot on transmission line maintenance, as the authors know transmission line mobile robot is a kind of special robot which runs on high-voltage cable to replace or assist manual power maintenance operation. In the process of live working, the manipulator, working end effector and the working environment are located in the narrow space and with heterogeneous shapes, the robot collision-free obstacle avoidance movement is the premise to complete the operation task. In the simultaneous operation, the mechanical properties between the manipulator effector and the operation object are the key to improve the operation reliability. These put forward higher requirements for the mechanical configuration and dynamic characteristics of the robot, and this is the purpose of the manuscript. Design/methodology/approach Based on the above, aiming at the task of tightening the tension clamp for the four-split transmission lines, the paper proposed a four-wheel mobile robot mechanism configuration and its terminal tool which can adapt to the walking and operation on multi-split transmission lines. In the study, the dynamic models of the rigid robot and flexible transmission line are established, respectively, and the dynamic model of rigid-flexible coupling system is established on this basis, the working space and dynamic characteristics of the robot have been simulated in ADAMS and MATLAB. Findings The research results show that the mechanical configuration of this robot can complete the tightening operation of the four-split tension clamp bolts and the motion of robot each joint meets the requirements of driving torque in the operation process, which avoids the operation failure of the robot system caused by the insufficient or excessive driving force of the robot joint torque. Originality/value Finally, the engineering practicability of the mechanical configuration and dynamic model proposed in the paper has been verified by the physical prototype. The originality value of the research is that it has double important theoretical significance and practical application value for the optimization of mechanical structure parameters and electrical control parameters of transmission line mobile robots.

Galloping Vibration of Nonlinear Cables Through a Two Degree-of-Freedom Oscillator

2016 ◽  
Author(s):  
Albert C. J. Luo ◽  
Bo Yu
Keyword(s):  
Transmission Line ◽  
Analytical Solutions ◽  
Transmission Lines ◽  
Nonlinear Oscillator ◽  
Numerical Solutions ◽  
Degree Of Freedom ◽  
Periodic Motions ◽  
Stability And Bifurcation ◽  
Two Degree Of Freedom

In this paper, galloping vibrations of a lightly iced transmission line are investigated through a two-degree-of-freedom (2-DOF) nonlinear oscillator. The 2-DOF nonlinear oscillator is used to describe the transverse and torsional motions of the galloping cables. The analytical solutions of periodic motions of galloping cables are presented through generalized harmonic balanced method. The analytical solutions of periodic motions for the galloping cable are compared with the numerical solutions, and the corresponding stability and bifurcation of periodic motions are analyzed by the eigenvalues analysis. To demonstrate the accuracy of the analytical solutions of periodic motions, the harmonic amplitudes are presented. This investigation will help one better understand galloping mechanism of iced transmission lines.

scholarly journals Effect of indirect lightning strike to 66kV transmission line in Java-Bali system

2018 ◽  
Vol 197 ◽  
pp. 11001
Author(s):  
Aristo Adi Kusuma ◽  
Putu Agus Aditya Pramana ◽  
Brian Bramantyo S.D.A. Harsono ◽  
Buyung Sofiarto Munir
Keyword(s):  
Transmission Line ◽  
Transmission Lines ◽  
Lightning Strike ◽  
Actual Condition ◽  
Peak Current ◽  
Lightning Strikes ◽  
Detection Systems ◽  
Current Magnitude ◽  
Lightning Detection ◽  
Insulator Flashover

Based on Java-Bali grid disturbance data, the 66kV transmission lines that is close to or intersect with 150kV or 500kV transmission line is often experienced earth fault due to insulator flashover. The insulator flashover can be caused by indirect lightning strike since lightning strikes tend to strike higher structure. Therefore, this paper will determine the effect of indirect lightning strike on 150kV or 500kV transmission line to 66kV transmission line by modeling and simulation using application of transient analysis. Variation of lightning peak current magnitude and gap between 66kV transmission line and transmission line with higher voltage is performed during simulation. The range of peak current magnitude follows the data from lightning detection systems, while the value of gap follows the data from actual condition. It is found that higher current peak and closer gap will cause higher transient overvoltage on insulator of 66kV transmission line thus insulator flashover may occur more frequent. Addition of earth wire on 66kV transmission line and gap between each transmission by organizing the sag of conductor can be performed to minimize the insulator flashover.

Determination of design capacity for water transmission systems based on the characteristics of regional peak factors

2006 ◽  
Vol 6 (5) ◽  
pp. 85-92
Author(s):  
I.-H. Hyun ◽  
S. Dockko ◽  
C.-I. Lee
Keyword(s):  
Water Supply ◽  
Transmission Systems ◽  
Design Capacity ◽  
Small Areas ◽  
Peak Factor ◽  
Water Transmission

The design capacity of a water supply can be derived from the peak factor. In this research, four different methods were used to determine the peak factor more precisely. Applying Method 1 could result in the design capacity being underestimated, by designing the lower part of the pipeline to apply the peak factor to the whole area. Applying Method 2 could overestimate it by 10–30% in the upper part of the pipeline by dividing the sum of the regional peak factors according to the ratio of peak day demand to the region. Applying Method 3 underestimates the design capacity in small areas, while it could overestimate it in large areas. Finally, Method 4 gives optimum results for the peak factor for estimating the design capacity.

Sign in / Sign up

Export Citation Format

Share Document