Improvement of the transparency, mechanical, and shape memory properties of polymethylmethacrylate/titania hybrid films using tetrabutylphosphonium chloride

2019 ◽  
Vol 10 (35) ◽  
pp. 4779-4788 ◽  
Author(s):  
Shuta Hara ◽  
Momohiro Ishizu ◽  
Shota Watanabe ◽  
Takehiro Kaneko ◽  
Takeshi Toyama ◽  
...  

The crosslink density adjustment strategy based on tetrabutylphosphonium chloride allows for the design of multifunctional hybrid polymer materials that are optically clear and combine excellent mechanical and shape memory properties.

2012 ◽  
Vol 1450 ◽  
Author(s):  
Bonifacio Alvarado-Tenorio ◽  
Angel Romo-Uribe ◽  
Patrick T. Mather

ABSTRACTSimultaneous wide- and small- angle X-ray scattering (WAXS-SAXS) has revealed a stress-induced bimodal orientation of POSS crystals and PCL chains, both in a constrained POSS/PCL crosslinked network architecture with shape memory properties. POSS/PCL nanocomposites with molecular weight of 2,600 g/mol exhibiting shape memory behavior were synthesized and variation of crosslinker molar ratio was used to obtain POSS/PCL networks with different crosslink density (Alvarado-Tenorio et al., Macromolecules, 44, 5682, 2011). In that study it was shown that there are POSS crystals embedded in an amorphous PCL matrix, and the POSS crystals were ordered in a cubic nanostructure. In this work, it will be shown that elongation at room temperature of all the networks yielded a double-induced orientation (90º and 180º) of the POSS crystals, as indicated by the 101 reflection. Moreover, it was also detected stretched-induced crystallization of the otherwise amorphous PCL chains. Furthermore, SAXS data showed long periods in the meridional and equatorial orientations of 630 Å, 90 Å and 45 Å corresponding to a lamellar nanostructure of PCL chains. The induced bimodal orientation of the POSS-PCL molecular network will be correlated with its shape memory properties.


The main methods (pressing and winding) of the processing of hybrid polymer composites to obtain items were examined. Advantages and disadvantages of the methods were noted. Good combinations of different-module fibers (carbon, glass, boron, organic) in hybrid polymer materials are described, which allow one to prepare materials with high compression strength on the one hand, and to increase fracture energy of samples and impact toughness on the other hand.


2021 ◽  
pp. 51000
Author(s):  
Fathin Hani Azizul Rahim ◽  
Abdul Aziz Saleh ◽  
Raa Khimi Shuib ◽  
Ku Marsilla Ku Ishak ◽  
Zuratul Ain Abdul Hamid ◽  
...  

2013 ◽  
Vol 80 ◽  
pp. 92-97 ◽  
Author(s):  
Semra Ergen ◽  
Orhan Uzun ◽  
Fikret Yilmaz ◽  
M. Fatih Kiliçaslan

2015 ◽  
Vol 13 ◽  
pp. 83-90 ◽  
Author(s):  
Cristiana Diana Cristea ◽  
Magdalena Lungu ◽  
Alexander M. Balagurov ◽  
Virgil Marinescu ◽  
Otilia Culicov ◽  
...  

The addition of Cu to near equiatomic NiTi shape memory alloys (SMAs) can provide some modifications of their shape memory properties by affecting their transformation behavior. The same effect was obtained in the case of Ni3Ti2 and Ni4Ti3 precipitates presence in the microstructure of NiTi. Also the substitution of Cu to NiTi alloys increases the hardness of the materials. This paper presents the microstructural and mechanical investigations of NiTi and NiTiCu alloys obtained by spark plasma sintering (SPS) process that represents a great potential for researchers as a new process for the fabrication of intermetallic compounds.


2013 ◽  
Vol 585 ◽  
pp. 86-93 ◽  
Author(s):  
R. Arockiakumar ◽  
M. Takahashi ◽  
S. Takahashi ◽  
Yoko Yamabe-Mitarai

2015 ◽  
Vol 96 ◽  
pp. 311-323 ◽  
Author(s):  
B. Gadot ◽  
O. Riu Martinez ◽  
S. Rolland du Roscoat ◽  
D. Bouvard ◽  
D. Rodney ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document