scholarly journals Hybrid magnetic nanoparticles as efficient nanoheaters in biomedical applications

2021 ◽  
Vol 3 (4) ◽  
pp. 867-888
Author(s):  
Gabriel C. Lavorato ◽  
Raja Das ◽  
Javier Alonso Masa ◽  
Manh-Huong Phan ◽  
Hariharan Srikanth

In this minireview we discuss and provide a perspective on the novel systems, the synthesis routes and the interface-mediated properties that determine the heating efficiency of hybrid magnetic nanoparticles.

Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2554 ◽  
Author(s):  
Mohammad Reza Zamani Kouhpanji ◽  
Bethanie J. H. Stadler

The remarkable multimodal functionalities of magnetic nanoparticles, conferred by their size and morphology, are very important in resolving challenges slowing the progression of nanobiotechnology. The rapid and revolutionary expansion of magnetic nanoparticles in nanobiotechnology, especially in nanomedicine and therapeutics, demands an overview of the current state of the art for synthesizing and characterizing magnetic nanoparticles. In this review, we explain the synthesis routes for tailoring the size, morphology, composition, and magnetic properties of the magnetic nanoparticles. The pros and cons of the most popularly used characterization techniques for determining the aforementioned parameters, with particular focus on nanomedicine and biosensing applications, are discussed. Moreover, we provide numerous biomedical applications and highlight their challenges and requirements that must be met using the magnetic nanoparticles to achieve the most effective outcomes. Finally, we conclude this review by providing an insight towards resolving the persisting challenges and the future directions. This review should be an excellent source of information for beginners in this field who are looking for a groundbreaking start but they have been overwhelmed by the volume of literature.


2015 ◽  
Vol 21 (42) ◽  
pp. 6038-6054 ◽  
Author(s):  
Dragoș Gudovan ◽  
Paul Balaure ◽  
Dan Mihăiescu ◽  
Adrian Fudulu ◽  
Bogdan Purcăreanu ◽  
...  

Author(s):  
Hyuk-Mi Lee ◽  
Hwan-Goo Kang

AbstractTo develop a new simple and simultaneous purification method for mycotoxins in feeds and grains, magnetic nanoparticles (MNPs) conjugated with monoclonal antibodies (mAbs) against mycotoxins were used to separate aflatoxin B1 (AFB1), zearalenone (ZEA) and deoxynivalenol (DON). For a single spike of each mycotoxin into the buffer solution (16% MeOH in PBS), mean recoveries were 93.1–95.0% for AFB1 (5–20 ng/mL spiked), 87.2–96.0% for ZEA (125–500 ng/mL spiked) and 75.2–96.9% for DON (250–1,000 ng/mL spiked) by HPLC and ELISA. Recoveries of AFB1 (20 ng/mL) and ZEA (500 ng/mL) simultaneously spiked into the buffer solution were 87.0 and 99.8%, respectively. Recovery rates of AFB1/DON and DON/ZEA spiked simultaneously were 86.2%/76.6% and 92.0%/86.7%, respectively, at concentrations of 20 ng/mL AFB1, 500 ng/mL ZEA, and 1,000 ng/mL DON. Recoveries using the novel mAb–MNP conjugated system in a buffer solution simultaneously spiked with AFB1, ZEA and DON were 82.5, 94.6 and 73.4%, respectively. Recoveries of DON in animal feed were 107.7–132.5% at concentrations of 250–1,000 ng/g spiked in feed. The immunoaffinity chromatography (IAC) clean-up method was compared with the purification method using novel mAb–MNP. After fortification of animal feed with AFB1 (5, 10 and 20 ng/g feed) and ZEA (125, 250 and 500 ng/g feed), AFB1 and ZEA were purified using both the methods. In the case of the novel mAb-MNP conjugated system, mean recoveries for AFB1 were 89.4, 73.1 and 88.3% at concentrations of 5, 10 and 20 ng/g feed, respectively. For ZEA, mean recoveries were 86.7, 85.9 and 79.1% at concentrations of 125, 250 and 500 ng/g, respectively. For IAC purification, recoveries were 42.9–45.1% for AFB1 and 96.8–103.2% for ZEA. In conclusion, the present purification method using monoclonal antibodies conjugated to MNPs can be used for simple and simultaneous purification of mycotoxins from feed and maize.


Nanoscale ◽  
2021 ◽  
Author(s):  
Frederik Laust Durhuus ◽  
Lau Halkier Wandall ◽  
Mathias Hoeg Boisen ◽  
Mathias Kure ◽  
Marco Beleggia ◽  
...  

Magnetically guided self-assembly of nanoparticles is a promising bottom-up method to fabricate novel materials and superstructures, such as, for example, magnetic nanoparticle clusters for biomedical applications. The existence of assembled...


Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4300
Author(s):  
Marta Multigner ◽  
Irene Morales ◽  
Marta Muñoz ◽  
Victoria Bonache ◽  
Fernando Giacomone ◽  
...  

To modulate the properties of degradable implants from outside of the human body represents a major challenge in the field of biomaterials. Polylactic acid is one of the most used polymers in biomedical applications, but it tends to lose its mechanical properties too quickly during degradation. In the present study, a way to reinforce poly-L lactic acid (PLLA) with magnetic nanoparticles (MNPs) that have the capacity to heat under radiofrequency electromagnetic fields (EMF) is proposed. As mechanical and degradation properties are related to the crystallinity of PLLA, the aim of the work was to explore the possibility of modifying the structure of the polymer through the heating of the reinforcing MNPs by EMF within the biological limit range f·H < 5·× 109 Am−1·s−1. Composites were prepared by dispersing MNPs under sonication in a solution of PLLA. The heat released by the MNPs was monitored by an infrared camera and changes in the polymer were analyzed with differential scanning calorimetry and nanoindentation techniques. The crystallinity, hardness, and elastic modulus of nanocomposites increase with EMF treatment.


Author(s):  
Muhammad Irfan ◽  
Imran Shah ◽  
Usama M Niazi ◽  
Muhsin Ali ◽  
Sadaqat Ali ◽  
...  

Fluid mixing in lab-on-a-chip devices at laminar flow conditions result in a low mixing index. The reason is dominant diffusion over the convection process. The mixing index can be improved by certain changes in the micromixer structural design like introducing obstacles in the path of fluid flow. These obstacles will make dominant the advection process over the diffusion process. The main contribution of this work is based on proposing the novel hybrid type micromixer design for enhancing the mixing quality. Three non-aligned M-type and non-aligned M-type with obstacles passive type micromixers are analyzed by COMSOL5.5. These designs are hybrid types because different structural changes are combined in a single design for mixing improvement. First of all the straight non-aligned inlets, M-type passive micromixer (SMTM) is analyzed. It is observed that mixing performance is improved because of M-shaped mixing units and non-aligned inlets. This improvement is deemed to be not enough so different shaped obstacles are introduced in the micromixer design. These designs based on obstacles are named horizontal rectangular M-type micromixer, square M-type micromixer, and vertical rectangular M-type micromixer. The mixing index for SMTM, square M-type micromixer, horizontal rectangular M-type micromixer, and vertical rectangular M-type micromixer at Reynolds number Re = 60 is respectively given by 71.1%, 83.21%, 84.45%, and 89.99%. The mixing index of vertical rectangular M-type micromixer was 59.34% − 87.65% for Re = 0.5–100. Vertical rectangular M-type micromixer is concluded with the better-mixing capability design among the proposed ones. Based on these simulation results, the vertical rectangular M-type micromixer design can be utilized for mixing purposes in biomedical applications like nanoparticle synthesis and biomedical sample preparation for drug delivery.


Author(s):  
Shane Harstad ◽  
Shivakumar Hunagund ◽  
Zoe Boekelheide ◽  
Zainab A. Hussein ◽  
Ahmed A. El-Gendy ◽  
...  

Author(s):  
C Minari ◽  
M Baleanil ◽  
L Cristofolini ◽  
F Baruffaldi

New bone cements that include several additives are currently being investigated and tested. One such additive is sodium fluoride (NaF), which promotes bone formation, facilitating implant integration and success. The influence of NaF on the fatigue performance of the cement as used in biomedical applications was tested in this paper. In fact fatigue failure of the cement mantle is a major factor limiting the longevity of a cemented implant. An experimental bone cement with added NaF (12wt%) was investigated. The fatigue strength of the novel bone cement was evaluated in comparison with the cement without additives; fatigue tests were conducted according to current standards. The load levels were arranged based on a validated, statistically based optimization algorithm. The curve of stress against number of load cycles and the endurance limit were obtained and compared for both formulations. The results showed that the addition of NaF (12 wt %) to polymethylmethacrylate (PMMA) bone cement does not affect the fatigue resistance of the material. Sodium fluoride can safely be added to the bone cement without altering the fatigue performance of the PMMA bone cement.


2012 ◽  
pp. 99-126 ◽  
Author(s):  
Trinh Thuy ◽  
Shinya Maenosono ◽  
Nguyê Thanh

Sign in / Sign up

Export Citation Format

Share Document