Self-assembled luminescent cholate gels induced by a europium ion in deep eutectic solvents

Soft Matter ◽  
2021 ◽  
Author(s):  
Meng Sun ◽  
Qintang Li ◽  
Xiao Chen

Luminescent gels have been successfully fabricated through the self-assembly of sodium cholate and a europium ion in choline chloride-based deep eutectic solvents.

2014 ◽  
Vol 70 (a1) ◽  
pp. C891-C891
Author(s):  
Vikram Singh Raghuwanshi ◽  
Miguel Ochmann ◽  
Frank Polzer ◽  
Armin Hoell ◽  
Klaus Rademann

Self-assembled metallic nanoparticles are attractive candidates for plasmonic heating, non-linear optical switching [1], bio-analytical, chemical [2], catalytic , and surface enhanced RAMAN scattering (SERS) [3]. These applications are strongly dependent on the shape, size, composition, size distribution and volume fraction of nanoparticles. Here, self-assembly of gold nanoparticles (AuNPs) was obtained by low energy sputter deposition on Deep Eutectic Solvent (DES ; choline chloride and urea) surfaces and elucidated by Small Angle X-ray Scattering (SAXS), Cryogenic Transmission Electron Microscopy (Cryo-TEM) and UV-Vis. Data analysis shows the formation of spherically shaped AuNPs of 5 nm in diameter with narrow size distributions. Moreover, analysis reveals that prolongation of gold-sputtering time has no effect on the size of the particles and only the concentration of AuNPs increases linearly. The growth of the maxima in evaluated structure factor S(q) and the distance distribution function G(r) at higher concentrations of AuNPs is caused by the interference effects. Moreover, it indicates that the particles are not arranged in random but have a self-assembly in short-range order. Prolonged gold-sputtering time leads to increase in the ordering of the AuNPs with strong interactions. It is proposed that the self-assembly of AuNPs is due to the ionic liquid template effects of DES and the balancing physical forces. Moreover, a disulfide based stabilizer bis ((2-Mercaptoethyl) trimethylammonium) disulfide dichloride was applied to supress the self-assembly. The stabilizer even reverses the self-assembled or agglomerated AuNPs back to stable 5 nm individual particles. The templating effect of DES is compared with the non-templating solvent Castor oil. Our results will also pave a way to understand and control self-assembly of metallic and bimetallic nanoparticles.


MRS Advances ◽  
2020 ◽  
Vol 5 (64) ◽  
pp. 3507-3520
Author(s):  
Chunhui Dai ◽  
Kriti Agarwal ◽  
Jeong-Hyun Cho

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.


Soft Matter ◽  
2021 ◽  
Author(s):  
Jiawei Lu ◽  
Xiangyu Bu ◽  
Xinghua Zhang ◽  
Bing Liu

The shapes of colloidal particles are crucial to the self-assembled superstructures. Understanding the relationship between the shapes of building blocks and the resulting crystal structures is an important fundamental question....


2015 ◽  
Vol 3 (4) ◽  
pp. 1540-1548 ◽  
Author(s):  
Sheng Zhu ◽  
Hui Zhang ◽  
Ping Chen ◽  
Lin-Hui Nie ◽  
Chuan-Hao Li ◽  
...  

A facile protocol for the self-assembly of the rGO/β-MnO2 hybrid hydrogel with ultrafine structure and precise control of mass-loading for high performance supercapacitors is reported.


Author(s):  
Ashfaq Adnan ◽  
Wing Kam Liu

While cancers have no known cure, some of them can be successfully treated with the combination of surgery and systematic therapy. In general, systemic/widespread chemotherapy is usually injected into the bloodstream to attempt to target cancer cells. Such procedure often imparts devastating side effects because cancer drugs are nonspecific in activity, and transporting them throughout the bloodstream further reduces their ability to target the right region. This means that they kill both healthy and unhealthy cells. It has been observed that the physiological conditions of the fluids around living cells can be characterized by pH, and the magnitude of pH around a living cell is different from cancerous cells. Moreover, a multiscale anatomy of carcinoma will reveal that the microstructure of cancer cells contains some characteristic elements such as specific biomarker receptors and DNA molecules that exclusively differentiate them from healthy cells. If these cancer specific ligands can be intercalated by some functional molecules supplied from an implantable patch, then the patch can be envisioned to serve as a complementary technology with current systemic therapy to enhance localized treatment efficiency, minimize excess injections/surgeries, and prevent tumor recurrence. The broader objective of our current research is to capture some fundamental insights of such drug delivery patch system. It is envisioned that the essential components of the device is nanodiamonds (ND), parylene buffer layer and doxorubicin (DOX) drugs. In its simplest form, self-assembled nanodiamonds - functionalized or pristine, and DOX molecules are contained inside parylene capsule. The efficient functioning of the device is characterized by its ability to precisely detect targets (cancer cells) and then to release drugs at a controlled manner. The fundamental science issues concerning the development of the ND-based device include: 1. A precise identification of the equilibrium structure and self assembled morphology of nanodiamonds, 2. Fundamental understanding of the drug adsorption and desorption process to and from NDs, and 3. The rate of drug release through the parylene buffers. The structure of the nanodiamond (ND) is crucial to the adsorption and desorption of drug molecules because it not only changes the self-assembly configuration but also alters the surface electrostatics. To date, the structure and electrostatics of NDs are not yet well understood. A density functional tight binding theory (DFTB) study on smaller [2] NDs suggests a facet dependent charge distributions on ND surfaces. These charges are estimated by Mulliken Analysis [1]. Using the charges for smaller NDs (∼valid for 1–3.3 nm dia ND) we first projected surface charges for larger (4–10 nm) truncated octahedral nanodiamonds (TOND), and it has been found that the [100] face and the [111] face contain positively and negatively charged atoms, respectively. These projected charges are then utilized to obtain the self assembled structure of pristine TONDs from Molecular Dynamics (MD) simulations [4] as shown in Fig. 1. The opposite charges on the [100] and [111] face invoked electrostatic attractions among the initially isolated NDs and a network of nanodiamond agglutinates are formed as evidenced in Fig. 1(b). This study confirms why as manufactured NDs are found in agglomerated form. The study also suggests that a large fraction of ND surfaces become unavailable for drug absorption as many of the [100] faces are coherently connected to [111] faces. As a result, it can be perceived that effective area for drug adsorption on ND surfaces will be less compared to theoretical prediction which suggests that a 4nm TOND may contain as high 360 drug molecules on its surface [5]. It has been observed that as manufactured NDs may contain a variety of functional groups, and currently, we are studying the mechanism of self-assembly for functionalized nanodiamonds so that we understand the role of functional groups. The next phase of calculation involves binding of the DOX to the NDs. Essentially, the understanding of drug absorption and desorption profile at a controlled rate to and from NDs is the most critical part of the device design. Some recent quantum calculation suggests that part of NDs and drug molecules contain opposite charges at their surfaces; it has been a natural interpretation that interactions between ND and drug molecules should be straight-forward — NDs should attract to drugs as soon as they come closure. Recent experiments [6], however, suggest that NDs usually do not interact with drug molecules in the presence of neutral solutions. Addition of NaCl in the solution improves the interaction dramatically. In the first part of the study, we [3–5] have studied the interaction of single DOX molecules with TOND surfaces via MD simulation. As shown in Fig. 2, this study suggests that DOX molecules first arrange them around the preferential sites on nanodiamonds (e.g. around the [111] face) and then spontaneously attach on the surface. It is also observed that only DOX molecule is attached per facets of TONDs. It can be noted that each TOND has 6 [100] face and 8 [111] faces. Figure 3 shows the energy minimization process during the DOX-ND interaction. It can be noted that these simulations have been performed in vacuum environment. In order to see how DOX interacts in solution media, another set of simulations have been conducted where “vacuum” environment have been replaced with solution media of different pH. Moreover, functionalization on the ND surfaces will create a different environment for the DOX molecules. Research is underway to capture the fundamental physics on the DOX loading and release to and from functionalized nanodiamonds. Once we understand the essential physics of drug loading and unloading, in the future we plan to model diffusion controlled drug release through ND coated film device by incorporating the multiscale science learned from the current study. Results from this study will provide fundamental insight on the definitive targeting of infected cells and high resolution controlling of drug molecules.


2021 ◽  
Author(s):  
Vignesh Suresh ◽  
Ah Bian Chew ◽  
Christina Yuan Ling Tan ◽  
Hui Ru Tan

Abstract Block copolymer (BCP) self-assembly processes are often seen as reliable techniques for advanced nanopatterning to achieve functional surfaces and create templates for nanofabrication. By taking advantage of the tunability in pitch, diameter and feature-to-feature separation of the self-assembled BCP features, complex, laterally organized- and stacked- multicomponent nanoarrays comprising of gold and polymer have been fabricated. The approaches not only demonstrate nanopatterning of up to two levels of hierarchy but also investigate how a variation in the feature-to-feature gap at the first hierarchy affects the self-assembly of polymer features at the second. Such BCP self-assembly enabled multicomponent nanoarray configurations are rarely achieved by other nanofabrication approaches and are particularly promising for pushing the boundaries of block copolymer lithography and in creating unique surface architectures and complex morphologies at the nanoscale.


2021 ◽  
Author(s):  
Samuel Edward Walker ◽  
Stephanie A Boer ◽  
Thomas Malcomson ◽  
Martin J. Paterson ◽  
Kellie Tuck ◽  
...  

Control of self-sorting regimes is achieved through adjustment of steric interactions in self-assembled coordination cages. The self-assembly regime of dynamic mixtures of heteroleptic cages is followed by HPLC to show...


CrystEngComm ◽  
2020 ◽  
Vol 22 (1) ◽  
pp. 52-60 ◽  
Author(s):  
Sze Le Loh ◽  
Alexandre N. Sobolev ◽  
Siew Huah Lim ◽  
Irene Ling

The interplay of different organic dications substituted at ortho- or meta-positions on the bis(methylene)phenyl ring and p-sulfonatocalix[4]arene, along with phosphonium cations and hydrated lanthanides affords new fascinating self-assembled structures.


Nanoscale ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 388-396
Author(s):  
Indra Memdi Khoris ◽  
Akhilesh Babu Ganganboina ◽  
Tetsuro Suzuki ◽  
Enoch Y. Park

Inspired by the self-assembly approach, in this work, the chromogen, 3,3′,5,5′-tetramethylbenzidine (TMB), was successfully co-precipitated in aqueous solution to form collective nanoparticles (NPs) of signal molecules (TMB-NPs).


2020 ◽  
Vol 8 (31) ◽  
pp. 10837-10843
Author(s):  
Zhichun Shangguan ◽  
Chunyang Yu ◽  
Chen Li ◽  
Xianhui Huang ◽  
Yiyong Mai ◽  
...  

We show the strategy of introducing azobenzene groups into graphene nanoribbons (GNRs), which not only endows GNRs with fast photo-responsiveness but also induces the self-assembly of the GNRs into ultra-long nanowires.


Sign in / Sign up

Export Citation Format

Share Document