hybrid hydrogels
Recently Published Documents


TOTAL DOCUMENTS

485
(FIVE YEARS 185)

H-INDEX

54
(FIVE YEARS 15)

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 272
Author(s):  
Pablo Sánchez-Cid ◽  
Mercedes Jiménez-Rosado ◽  
José Fernando Rubio-Valle ◽  
Alberto Romero ◽  
Francisco J. Ostos ◽  
...  

Hydrogels are considered good biomaterials for soft tissue regeneration. In this sense, collagen is the most used raw material to develop hydrogels, due to its high biocompatibility. However, its low mechanical resistance, thermal stability and pH instability have generated the need to look for alternatives to its use. In this sense, the combination of collagen with another raw material (i.e., polysaccharides) can improve the final properties of hydrogels. For this reason, the main objective of this work was the development of hydrogels based on collagen and chitosan. The mechanical, thermal and microstructural properties of the hydrogels formed with different ratios of collagen/chitosan (100/0, 75/25, 50/50, 25/75 and 0/100) were evaluated after being processed by two variants of a protocol consisting in two stages: a pH change towards pH 7 and a temperature drop towards 4 °C. The main results showed that depending on the protocol, the physicochemical and microstructural properties of the hybrid hydrogels were similar to the unitary system depending on the stage carried out in first place, obtaining FTIR peaks with similar intensity or a more porous structure when chitosan was first gelled, instead of collagen. As a conclusion, the synergy between collagen and chitosan improved the properties of the hydrogels, showing good thermomechanical properties and cell viability to be used as potential biomaterials for Tissue Engineering.


2022 ◽  
Author(s):  
Chenxi Li ◽  
Rui Liu ◽  
Yurong Song ◽  
Dongjie Zhu ◽  
Liuchunyang Yu ◽  
...  

Abstract Triptolide (TP) is a DMARD highly effective in patients with RA. Hyaluronic acid (HA) hydrogels loaded RGD-attached gold nanoparticles containing TP were synthesized to alleviate the toxicity and increase therapeutic specificity. The hydrogels can be applied for targeted photothermal-chemo therapy, and in vivo imaging of RA. Heat was locally generated at the inflammation site after degradation of HA chains due to near-infrared resonance (NIR) irradiation of gold nanoparticles (AuNPs), and TP was released. Administration of the hybrid hydrogels containing low dosage of TP combined with NIR irradiation alleviated arthritic conditions and improved the inflamed joint in collagen-induced arthritis (CIA) mice. In vitro effect of the hydrogel was mediated through decrease of phosphorylation of mTOR and its substrate, p70S6K1, thus inhibiting mTOR pathway.


2022 ◽  
Author(s):  
Sangwook Bae ◽  
Yong-Wo Kim ◽  
Jeong-Yun Sun ◽  
Sunghoon Kwon

Noncovalent hydrogels, compared to covalent hydrogels, have distinctive advantages including biocompatibility and self-healing property but tend to have poor mechanical robustness, thus restricting their application spectrum. A clue to increase utility of such soft hydrogels without chemical bulk modification can be witnessed in biological organ walls where soft mucous epithelial layers are juxtaposed with tough connective tissues. Perhaps, similarly, bonding noncovalent hydrogels to stronger materials, such as tough hydrogels, might be a viable approach for increasing stability and scalability as well as creating novel functions for hydrogel-based systems. However when attempting to bond these two materials, each of the four existing hydrogel-hydrogel bonding method has practical shortcomings. In this work, we introduce a mucosa-inspired bonding method that realizes interfacial bonding of noncovalent hydrogels to tough, hybrid hydrogels without external glue or bulk modification of the noncovalent gel while preserving interfacial micropatterns. The procedure is simple and we confirmed broad applicability with various noncovalent hydrogels and tough hydrogels. We demonstrated the utility of our bonding method with novel applications regarding in vitro assay, soft robotics and biologically inspired systems.


RSC Advances ◽  
2022 ◽  
Vol 12 (4) ◽  
pp. 2009-2018
Author(s):  
Vandana Singh ◽  
Yadavali Siva Prasad ◽  
Arun Kumar Rachamalla ◽  
Vara Prasad Rebaka ◽  
Tohira Banoo ◽  
...  

The design and synthesis of amphiphilic molecules play a crucial role in fabricating smart functional materials via self-assembly.


Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 130
Author(s):  
Maria Bercea

The paper presents the viscoelastic properties of new hybrid hydrogels containing poly(vinyl alcohol) (PVA), hydroxypropylcellulose (HPC), bovine serum albumin (BSA) and reduced glutathione (GSH). After heating the mixture at 55 °C, in the presence of GSH, a weak network is formed due to partial BSA unfolding. By applying three successive freezing/thawing cycles, a stable porous network structure with elastic properties is designed, as evidenced by SEM and rheology. The hydrogels exhibit self-healing properties when the samples are cut into two pieces; the intermolecular interactions are reestablished in time and therefore the fragments repair themselves. The effects of the BSA content, loaded deformation and temperature on the self-healing ability of hydrogels are presented and discussed through rheological data. Due to their versatile viscoelastic behavior, the properties of PVA/HPC/BSA hydrogels can be tuned during their preparation in order to achieve suitable biomaterials for targeted applications.


2021 ◽  
Author(s):  
Chen Hu ◽  
Taufiq Ahmad ◽  
Malik Salman Haider ◽  
Lukas Hahn ◽  
Philipp Stahlhut ◽  
...  

Abstract Alginates are the most commonly used bioink in biofabrication, but their rheological profiles makes it very challenging to perform real 3D printing. In this study, an advanced hybrid hydrogel ink was developed, a mixture of thermogelling diblock copolymer, alginate and clay i.e. Laponite XLG. The reversible thermogelling and shear thinning properties of the diblock copolymer in the ink system improves handling and 3D printability significantly. Various three-dimensional constructs, including suspended filaments, were printed successfully with high shape fidelity and excellent stackability. Subsequent ionic crosslinking of alginate fixates the printed scaffolds, while the diblock copolymer is washed out of the structure, acting as a fugitive material on the (macro)molecular level. Finally, cell-laden printing and culture over 21 days demonstrated good cytocompatibility and feasibility of the novel hybrid hydrogels for 3D bioprinting. We believe that the developed material could be interesting for a wide range of bioprinting applications including tissue engineering and drug screening, potentially enabling also other biological bioinks such as collagen, hyaluronic acid, decellularized extracellular matrix or cellulose based bioinks.


Pharmaceutics ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1968
Author(s):  
Renata Basto ◽  
Raquel Andrade ◽  
Cláudia Nunes ◽  
Sofia A. Costa Lima ◽  
Salette Reis

Niacinamide (NIA) has been widely used in halting the features of ageing by acting as an antioxidant and preventing dehydration. NIA’s physicochemical properties suggest difficulties in surpassing the barrier imposed by the stratum corneum layer to reach the target in the skin. To improve cutaneous delivery of NIA, a hybrid nanogel was designed using carrageenan and polyvinylpyrrolidone polymers combined with jojoba oil as a permeation enhancer. Three different types of transethosomes were prepared by the thin-film hydration method, made distinct by the presence of either an edge activator or a permeation enhancer, to allow for a controlled delivery of NIA. Formulations were characterized by measurements of size, polydispersity index, zeta potential, encapsulation efficiency, and loading capacity, and by evaluating their chemical interactions and morphology. Skin permeation assays were performed using Franz diffusion cells. The hybrid hydrogels exhibited robust, porous, and highly aligned macrostructures, and when present, jojoba oil changed their morphology. Skin permeation studies with transethosomes-loaded hydrogels showed that nanogels per se exhibit a more controlled and enhanced permeation, in particular when jojoba oil was present in the transethosomes. These promising nanogels protected the human keratinocytes from UV radiation, and thus can be added to sunscreens or after-sun lotions to improve skin protection.


Molecules ◽  
2021 ◽  
Vol 26 (22) ◽  
pp. 7001
Author(s):  
Giuseppe Cirillo ◽  
Manuela Curcio ◽  
Lorenzo Francesco Madeo ◽  
Francesca Iemma ◽  
Giovanni De De Filpo ◽  
...  

The performance of Carbon Nanotubes hybrid hydrogels for environmental remediation was investigated using Methylene Blue (MB), Rhodamine B (RD), and Bengal Rose (BR) as model contaminating dyes. An acrylate hydrogel network with incorporated CNT was synthesized by photo-polymerization without any preliminary derivatization of CNT surface. Thermodynamics, isothermal and kinetic studies showed favorable sorption processes with the application of an external 12 V electric field found to be able to influence the amount of adsorbed dyes: stronger interactions with cationic MB molecules ( and of 19.72 and 33.45 mg g−1, respectively) and reduced affinity for anionic RD ( and of 28.93 and 13.06 mg g−1, respectively) and neutral BR ( and of 36.75 and 15.85 mg g−1, respectively) molecules were recorded. The influence of pH variation on dyes adsorption was finally highlighted by reusability studies, with the negligible variation of adsorption capacity after five repeated sorption cycles claiming for the suitability of the proposed systems as effective sorbent for wastewater treatment.


2021 ◽  
Vol 22 (22) ◽  
pp. 12267
Author(s):  
Soher N. Jayash ◽  
Paul R. Cooper ◽  
Richard M. Shelton ◽  
Sarah A. Kuehne ◽  
Gowsihan Poologasundarampillai

Hydrogels constructed from naturally derived polymers provide an aqueous environment that encourages cell growth, however, mechanical properties are poor and degradation can be difficult to predict. Whilst, synthetic hydrogels exhibit some improved mechanical properties, these materials lack biochemical cues for cells growing and have limited biodegradation. To produce hydrogels that support 3D cell cultures to form tissue mimics, materials must exhibit appropriate biological and mechanical properties. In this study, novel organic-inorganic hybrid hydrogels based on chitosan and silica were prepared using the sol-gel technique. The chemical, physical and biological properties of the hydrogels were assessed. Statistical analysis was performed using One-Way ANOVAs and independent-sample t-tests. Fourier transform infrared spectroscopy showed characteristic absorption bands including amide II, Si-O and Si-O-Si confirming formation of hybrid networks. Oscillatory rheometry was used to characterise the sol to gel transition and viscoelastic behaviour of hydrogels. Furthermore, in vitro degradation revealed both chitosan and silica were released over 21 days. The hydrogels exhibited high loading efficiency as total protein loading was released in a week. There were significant differences between TC2G and C2G at all-time points (p < 0.05). The viability of osteoblasts seeded on, and encapsulated within, the hydrogels was >70% over 168 h culture and antimicrobial activity was demonstrated against Pseudomonas aeruginosa and Enterococcus faecalis. The hydrogels developed here offer alternatives for biopolymer hydrogels for biomedical use, including for application in drug/cell delivery and for bone tissue engineering.


Sign in / Sign up

Export Citation Format

Share Document