Photoredox/Nickel Dual Catalyzed Stereospecific Synthesis of Distal Alkenyl Ketones

2022 ◽  
Author(s):  
Tian-Tian Zhao ◽  
Wan-Lei Yu ◽  
Zhitao Feng ◽  
Hao-Ni Qin ◽  
Haixue Zheng ◽  
...  
Keyword(s):  
Stereospecific Synthesis ◽  
Reaction Conditions ◽  
Aryl Alkynes

The selective C-C bond deconstruction/refunctionalization via a photoredox/nickel dual-catalyzed hydroalkylation of alkynes is developed under mild reaction conditions. In this protocol, a broad range of alkyl- and aryl-alkynes could react...

Co(III)-Catalyzed Stereospecific Synthesis of (E)-Homoallylic Alcohols with 4-vinyl-1,3-dioxan-2-ones: Late-Stage C−H Homoallylation of indole derivatives

2021 ◽  
Author(s):  
Hong Hu ◽  
Wenhua Xu ◽  
Wu-Xiang Kang ◽  
Wei Sun ◽  
Rui Sun ◽  
...  
Keyword(s):  
Late Stage ◽  
High Efficiency ◽  
Stereospecific Synthesis ◽  
Indole Derivatives ◽  
Reaction Conditions ◽  
Homoallylic Alcohols

An unprecedented Co(III)-catalyzed stereoselective C−H homoallylation reaction of indole derivatives with 4-vinyl-1,3-dioxan-2-ones to access (E)-homoallylic alcohols has been developed. This protocol exhibits mild reaction conditions, high efficiency, good yields, excellent...

Undecagold labeling of tRNA

1991 ◽  
Vol 49 ◽  
pp. 44-45
Author(s):  
James F. Hainfeld ◽  
Kyra M. Alford ◽  
Mathias Sprinzl ◽  
Valsan Mandiyan ◽  
Santa J. Tumminia ◽  
...  
Keyword(s):  
High Resolution ◽  
Transmission Electron Micrograph ◽  
Anticodon Loop ◽  
Electron Micrograph ◽  
Reaction Conditions ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission

The undecagold (Au11) cluster was used to covalently label tRNA molecules at two specific ribonucleotides, one at position 75, and one at position 32 near the anticodon loop. Two different Au11 derivatives were used, one with a monomaleimide and one with a monoiodacetamide to effect efficient reactions.The first tRNA labeled was yeast tRNAphe which had a 2-thiocytidine (s2C) enzymatically introduced at position 75. This was found to react with the iodoacetamide-Aun derivative (Fig. 1) but not the maleimide-Aun (Fig. 2). Reaction conditions were 37° for 16 hours. Addition of dimethylformamide (DMF) up to 70% made no improvement in the labeling yield. A high resolution scanning transmission electron micrograph (STEM) taken using the darkfield elastically scattered electrons is shown in Fig. 3.

Dimensionally-Controlled Hydrothermal Tm3+-doped Oxidic Nanocrystals and Their Photoluminescence Properties

2010 ◽  
Vol 1247 ◽  
Author(s):  
Rocío Calderón-Villajos ◽  
Carlos Zaldo ◽  
Concepción Cascales
Keyword(s):  
Single Crystals ◽  
Fluorescence Lifetimes ◽  
Photoluminescence Properties ◽  
Reaction Conditions ◽  
Hydrothermal Processes ◽  
Bulk Single Crystals ◽  
Template Free ◽  
Reaction Media

AbstractControlled reaction conditions in simple, template-free hydrothermal processes yield Tm-Lu2O3 and Tm-GdVO4 nanocrystals with well-defined specific morphologies and sizes. In both oxide families, nanocrystals prepared at pH 7 reaction media exhibit photoluminescence in ∼1.95 μm similar to bulk single crystals. For the lowest Tm3+ concentration (0.2 % mol) in GdVO4 measured 3H4 and 3F4 fluorescence lifetimes τ are very near to τrad.

Urea-Catalyzed Functionalization of Unactivated C–H Bonds

2020 ◽  
Author(s):  
Alex L. Bagdasarian ◽  
Stasik Popov ◽  
Benjamin Wigman ◽  
Wenjing Wei ◽  
woojin lee ◽  
...  
Keyword(s):  
Hydrogen Bonding ◽  
Organic Synthesis ◽  
High Energy ◽  
Acid Catalysts ◽  
Potential Utility ◽  
New Paradigm ◽  
Lewis Acid Catalysts ◽  
Reaction Conditions ◽  
Highly Active ◽  
Acidic Nature

Herein we report the 3,5bistrifluoromethylphenyl urea-catalyzed functionalization of unactivated C–H bonds. In this system, the urea catalyst mediates the formation of high-energy vinyl carbocations that undergo facile C–H insertion and Friedel–Crafts reactions. We introduce a new paradigm for these privileged scaffolds where the combination of hydrogen bonding motifs and strong bases affords highly active Lewis acid catalysts capable of ionizing strong C–O bonds. Despite the highly Lewis acidic nature of these catalysts that enables triflate abstraction from sp<sup>2</sup> carbons, these newly found reaction conditions allow for the formation of heterocycles and tolerate highly Lewis basic heteroaromatic substrates. This strategy showcases the potential utility of dicoordinated vinyl carbocations in organic synthesis.<br>

Urea-Catalyzed Functionalization of Unactivated C–H Bonds

2020 ◽  
Author(s):  
Alex L. Bagdasarian ◽  
Stasik Popov ◽  
Benjamin Wigman ◽  
Wenjing Wei ◽  
woojin lee ◽  
...  
Keyword(s):  
Hydrogen Bonding ◽  
Organic Synthesis ◽  
High Energy ◽  
Acid Catalysts ◽  
Potential Utility ◽  
New Paradigm ◽  
Lewis Acid Catalysts ◽  
Reaction Conditions ◽  
Highly Active ◽  
Acidic Nature

Herein we report the 3,5bistrifluoromethylphenyl urea-catalyzed functionalization of unactivated C–H bonds. In this system, the urea catalyst mediates the formation of high-energy vinyl carbocations that undergo facile C–H insertion and Friedel–Crafts reactions. We introduce a new paradigm for these privileged scaffolds where the combination of hydrogen bonding motifs and strong bases affords highly active Lewis acid catalysts capable of ionizing strong C–O bonds. Despite the highly Lewis acidic nature of these catalysts that enables triflate abstraction from sp<sup>2</sup> carbons, these newly found reaction conditions allow for the formation of heterocycles and tolerate highly Lewis basic heteroaromatic substrates. This strategy showcases the potential utility of dicoordinated vinyl carbocations in organic synthesis.<br>

Direct Cyclization of Alkenyl Thioester via Transition Metal‐hydrogen Atom Transfer/radical‐polar Crossover Mechanism

2019 ◽  
Author(s):  
Shiori Date ◽  
Kensei Hamasaki ◽  
Karen Sunagawa ◽  
Hiroki Koyama ◽  
Chikayoshi Sebe ◽  
...  
Keyword(s):  
Natural Products ◽  
Hydrogen Atom ◽  
Transition Metal ◽  
Hydrogen Atom Transfer ◽  
Synthetic Method ◽  
Atom Transfer ◽  
Reaction Conditions ◽  
Hydride Hydrogen ◽  
Sulfur Heterocycles ◽  
One Step

<div>We report here a catalytic, Markovnikov selective, and scalable synthetic method for the synthesis of saturated sulfur heterocycles, which are found in the structures of pharmaceuticals and natural products, in one step from an alkenyl thioester. Unlike a potentially labile alkenyl thiol, an alkenyl thioester is stable and easy to prepare. The powerful Co catalysis via a cobalt hydride hydrogen atom transfer and radical-polar crossover mechanism enabled simultaneous cyclization and deprotection. The substrate scope was expanded by the extensive optimization of the reaction conditions and tuning of the thioester unit.</div>

Iterative Supervised Principal Component Analysis-Driven Ligand Design for Regioselective Ti-Catalyzed Pyrrole Synthesis

2020 ◽  
Author(s):  
Xin Yi See ◽  
Benjamin Reiner ◽  
Xuelan Wen ◽  
T. Alexander Wheeler ◽  
Channing Klein ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
De Novo ◽  
Principal Component ◽  
Component Analysis ◽  
Catalyst Design ◽  
Data Driven ◽  
Initial Reaction ◽  
Training Set ◽  
Reaction Conditions ◽  
Component Loadings

<div> <div> <div> <p>Herein, we describe the use of iterative supervised principal component analysis (ISPCA) in de novo catalyst design. The regioselective synthesis of 2,5-dimethyl-1,3,4-triphenyl-1H- pyrrole (C) via Ti- catalyzed formal [2+2+1] cycloaddition of phenyl propyne and azobenzene was targeted as a proof of principle. The initial reaction conditions led to an unselective mixture of all possible pyrrole regioisomers. ISPCA was conducted on a training set of catalysts, and their performance was regressed against the scores from the top three principal components. Component loadings from this PCA space along with k-means clustering were used to inform the design of new test catalysts. The selectivity of a prospective test set was predicted in silico using the ISPCA model, and only optimal candidates were synthesized and tested experimentally. This data-driven predictive-modeling workflow was iterated, and after only three generations the catalytic selectivity was improved from 0.5 (statistical mixture of products) to over 11 (> 90% C) by incorporating 2,6-dimethyl- 4-(pyrrolidin-1-yl)pyridine as a ligand. The successful development of a highly selective catalyst without resorting to long, stochastic screening processes demonstrates the inherent power of ISPCA in de novo catalyst design and should motivate the general use of ISPCA in reaction development. </p> </div> </div> </div>

Suzuki–Miyaura cross-coupling for chemoproteomic applications

2020 ◽  
Author(s):  
Jian Cao ◽  
Ernest Armenta ◽  
Lisa Boatner ◽  
Heta Desai ◽  
Neil Chan ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Cross Coupling ◽  
Protein Profiling ◽  
Protein Labeling ◽  
Caspase 8 ◽  
Complex Cell ◽  
Bioorthogonal Chemistry ◽  
Reaction Conditions ◽  
Target Deconvolution ◽  
Palladium Catalyzed

Bioorthogonal chemistry is a mainstay of chemoproteomic sample preparation workflows. While numerous transformations are now available, chemoproteomic studies still rely overwhelmingly on copper-catalyzed azide –alkyne cycloaddition (CuAAC) or 'click' chemistry. Here we demonstrate that gel-based activity-based protein profiling (ABPP) and mass-spectrometry-based chemoproteomic profiling can be conducted using Suzuki–Miyaura cross-coupling. We identify reaction conditions that proceed in complex cell lysates and find that Suzuki –Miyaura cross-coupling and CuAAC yield comparable chemoproteomic coverage. Importantly, Suzuki–Miyaura is also compatible with chemoproteomic target deconvolution, as demonstrated using structurally matched probes tailored to react with the cysteine protease caspase-8. Uniquely enabled by the observed orthogonality of palladium-catalyzed cross-coupling and CuAAC, we combine both reactions to achieve dual protein labeling.

Gold Catalyzed Hydroamination of Propargylic Alcohols: Controlling Divergent Reaction Pathways to Access 1,3-Aminoalcohols, 3-Hydroxyketones or 3-Aminoketones

2018 ◽  
Author(s):  
Victor Laserna ◽  
Tom Sheppard
Keyword(s):  
Gold Catalysis ◽  
Reaction Pathways ◽  
High Yield ◽  
Reaction Conditions ◽  
Propargylic Alcohols ◽  
Catalytic Quantity ◽  
Selective Formation ◽  
General Method

A versatile approach to the valorization of propargylic alcohols is reported, enabling controlled access to three different products from the same starting materials. Firstly, a general method for the hydroamination of propargylic alcohols with anilines is described using gold catalysis to give 3-hydroxy imines with complete regioselectivity. These 3-hydroxyimines can be reduced to give 1,3-aminoalcohols with high syn seletivity. Alternatively, by using a catalytic quantity of aniline, 3-hydroxyketones can be obtained in high yield directly from propargylic alcohols. Further manipulation of the reaction conditions enables the selective formation of 3-aminoketones via a rearrangement/hydroamination pathway.<br>

Solid State Analysis and Theoretical Explorations on Polymorphic and Hydrate Forms of p-Hydroxybenzaldehyde Isonicotinichydrazone: Effect of Additives on Polymorphic Crystallization

2018 ◽  
Author(s):  
Lincy Tom ◽  
Victoria A. Smolenski ◽  
Jerry P. Jasinski ◽  
M.R. Prathapachandra Kurup
Keyword(s):  
Hirshfeld Surface ◽  
Framework Analysis ◽  
Reaction Conditions ◽  
Space Groups ◽  
Effect Of Additives ◽  
Ft Ir ◽  
Packing Arrangement ◽  
The Stability ◽  
Ir And Raman ◽  
Isonicotinic Hydrazide

The reaction of p-hydroxybenzaldehyde with an equimolar amount of isonicotinic hydrazide afforded two polymorphic and hydrate forms of p-hydroxybenzaldehyde isonicotinichydrazone (HBIH) by varying the experimental reaction conditions. The compounds are fully characterized by means of single crystal and powder diffraction methods, vibrational spectroscopy (FT-IR and Raman), thermal and elemental analysis. The compound crystallizes in three different forms in two different space groups, P21/c (form PA and PB) and Pbca (PC). The Hirshfeld surface analysis shows the differences in the relative contributions of intermolecular interactions to the total Hirshfeld surface area for the HBIH molecules. The calculated pairwise interaction energies (104-116 kJ/mol) can be related to the stability of the crystals. Energy framework analysis identifies the interaction hierarchy and their topology. The geometry and conformation of the three forms are essentially similar which differ only by packing arrangement.

Sign in / Sign up

Export Citation Format

Share Document