Chemical structure and dissolution behaviour of CaO and ZnO containing alkali-borosilicate glass

2022 ◽  
Author(s):  
Adam J Fisher ◽  
Hao Ding ◽  
Prashant Rajbhandari ◽  
Brant Walkley ◽  
Lewis R Blackburn ◽  
...  
Keyword(s):  
Radioactive Waste ◽  
Nuclear Waste ◽  
Borosilicate Glass ◽  
Chemical Structure ◽  
Sodium Borosilicate Glass ◽  
Waste Vitrification ◽  
Dissolution Behaviour ◽  
High Level Nuclear Waste ◽  
High Level

Within the context of the UK’s radioactive waste vitrification programme, which utilises a lithium-sodium borosilicate glass modified with CaO and ZnO to immobilise high level nuclear waste, an investigation was...

scholarly journals Vitreous Materials for Nuclear Waste Immobilisation and IAEA Support Activities

MRS Advances ◽  
2016 ◽  
Vol 1 (63-64) ◽  
pp. 4201-4206 ◽  
Author(s):  
Rebecca A. Robbins ◽  
Michael I. Ojovan
Keyword(s):  
Radioactive Waste ◽  
Nuclear Waste ◽  
Chemical Elements ◽  
Phosphate Glasses ◽  
Waste Vitrification ◽  
Waste Immobilization ◽  
High Level Nuclear Waste ◽  
Nuclear Waste Immobilization ◽  
High Level ◽  
High Degree

ABSTRACTVitreous materials are the overwhelming world-wide choice for the immobilisation of HLW resulting from nuclear fuel reprocessing due to glass tolerance for the chemical elements found in the waste as well as its inherent stability and durability. Vitrification is a mature technology and has been used for high-level nuclear waste immobilization for more than 50 years. Borosilicate glass is the formulation of choice in most applications although other formulations are also used e.g. phosphate glasses are used to immobilize high level wastes in Russia. The excellent durability of vitrified radioactive waste ensures a high degree of environment protection. Waste vitrification gives high waste volume reduction along with simple and cheap disposal facilities. Although vitrification requires a high initial investment and then operational costs, the overall cost of vitrified radioactive waste is usually lower than alternative options when account is taken of transportation and disposal expenses. Glass has proven to be also a suitable matrix for intermediate and low-level radioactive wastes and is currently used to treat legacy waste in USA, and NPP operational waste in Russia and South Korea. This report is also outlining IAEA activities aiming to support utilisation of vitreous materials for nuclear waste immobilisation.

High level nuclear waste isolation: borosilicate glass versus crystals

Nature ◽  
1979 ◽  
Vol 278 (5701) ◽  
pp. 210-212 ◽  
Author(s):  
G. de Marsily
Keyword(s):  
Nuclear Waste ◽  
Borosilicate Glass ◽  
High Level Nuclear Waste ◽  
High Level

Nepheline Crystallization in High-Alumina High-Level Waste Glass

2015 ◽  
Vol 1744 ◽  
pp. 85-91 ◽  
Author(s):  
José Marcial ◽  
John McCloy ◽  
Owen Neill
Keyword(s):  
Nuclear Waste ◽  
Waste Glass ◽  
High Alumina ◽  
High Level Waste ◽  
Interfacial Conditions ◽  
Waste Vitrification ◽  
Cooling Schedules ◽  
High Level Nuclear Waste ◽  
High Level ◽  
Glass Compositions

ABSTRACTThe understanding of the crystallization of aluminosilicate phases in nuclear waste glasses is a major challenge for nuclear waste vitrification. Robust studies on the compositional dependence of nepheline formation have focused on large compositional spaces with hundreds of glass compositions. However, there are clear benefits to obtaining complete descriptions of the conditions under which crystallization occurs for specific glasses, adding to the understanding of nucleation and growth kinetics and interfacial conditions. The focus of this work was the investigation of the microstructure and composition of one simulant high-level nuclear waste glass crystallized under isothermal and continuous cooling schedules. It was observed that conditions of low undercooling, nepheline was the most abundant aluminosilicate phase. Further undercooling led to the formation of additional phases such as calcium phosphate. Nepheline composition was independent of thermal history.

Corrosion of inconel-690 electrodes in waste glass melts

1999 ◽  
Vol 556 ◽  
Author(s):  
H. Gan ◽  
A. C. Buechele ◽  
C.-W. Kim ◽  
X. Huang ◽  
R. K. Mohr ◽  
...  
Keyword(s):  
Nuclear Waste ◽  
Glass Composition ◽  
Waste Glass ◽  
Savannah River ◽  
Glass Melts ◽  
Waste Vitrification ◽  
Inconel 690 ◽  
Ac Current ◽  
High Level Nuclear Waste ◽  
High Level

AbstractInconel-690, a Cr-Ni-Fe-based “superalloy,” has become the material of choice for electrodes in joule-heated waste glass melters and is currently employed in the high-level nuclear waste vitrification systems at West Valley and DWPF, as well as in GTS Duratek's privatized M-Area mixed waste vitrification facility at Savannah River. Future applications of joule-heated vitrification technologies will necessitate an assessment of the limits of performance of this material under more demanding conditions than have been studied previously. In this work, Inconel 690 electrodes were tested in several simulated sodium-rich aluminosilicate waste glasses in wide ranges of AC current density, electrical waveform, temperature, and glass composition.

Non-Linearity in Glass Composition Dependence of Dissolution Rates: Effect of Solution pH

1993 ◽  
Vol 333 ◽  
Author(s):  
Shi-Ben Xing ◽  
Isabelle S. Muller ◽  
Ian L. Pegg
Keyword(s):  
Nuclear Waste ◽  
Glass Composition ◽  
Ph Dependence ◽  
Solution Ph ◽  
Ph Values ◽  
Waste Vitrification ◽  
High Level Nuclear Waste ◽  
High Level ◽  
Soluble Components ◽  
Glass Compositions

ABSTRACTIn our previous studies on the optimization of glass compositions for high-level nuclear waste vitrification it was found that, over certain composition ranges, PCT leachate concentrations increased dramatically with very small changes in glass composition. The large differences that are observed between the leachate pH values for the “durable” and the “less-durable” glasses is one possible cause for this strongly non-linear glass composition effect; conversely, the pH difference may be merely another symptom. In this study, four simulated nuclear waste glasses (two of the less-durable and two of the durable types), were leached in both zwitterionic and inorganic buffer solutions, at fixed pH-values in the ranges of 7 to 12. The very different leaching behaviors of the two types of glasses persisted and, furthermore, different pH-dependence was found despite their very similar glass composition. This study suggests that the leachate pH difference observed between the less-durable and the durable glasses under uncontrolled pH conditions is not the major cause of the large difference of leaching behavior between those glasses. The normalized release ratios of soluble components (B, Li, Na) to Si show significant differences for the two types of glasses.

Preliminary Post-Emplacement Safety Analysis of the Subseabed Disposal of High-Level Radioactive Waste

1983 ◽  
Vol 26 ◽  
Author(s):  
Maureen F. Kaplan ◽  
Charles M. Koplik
Keyword(s):  
Radioactive Waste ◽  
Nuclear Waste ◽  
North Pacific ◽  
Sensitivity Analyses ◽  
Radionuclide Transport ◽  
Radiological Hazard ◽  
Systems Model ◽  
High Level Nuclear Waste ◽  
High Level ◽  
Central North Pacific

ABSTRACTThe radiological hazard from the disposal of high-level nuclear waste deep within the ocean sediments is evaluated, on a preliminary basis, for locations in the central North Pacific and in the northwestern Atlantic. Radionuclide transport in the sediment and water column and by marine organisms is considered. Peak doses to an individual are approximately five orders of magnitude below background levels for both places. Sensitivity analyses for several imporLant aspects of the post-emplacement systems model are described.

scholarly journals Review of corrosion interactions between different materials relevant to disposal of high-level nuclear waste

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
Xiaolei Guo ◽  
Stephane Gin ◽  
Gerald S. Frankel
Keyword(s):  
Nuclear Waste ◽  
Borosilicate Glass ◽  
Solution Chemistry ◽  
Metal Alloys ◽  
Waste Forms ◽  
Open Questions ◽  
Environmental Attributes ◽  
Temperature Solution ◽  
High Level Nuclear Waste ◽  
High Level

Abstract This review covers the corrosion interactions between different materials that are relevant to the disposal of high-level nuclear waste, in particular the waste forms and containers. The materials of interest are borosilicate glass, crystalline ceramics, metal alloys, and any corrosion products that might form. The available data show that these interactions depend on the structure, chemistry, thermodynamic history, and proximity of the materials in contact, as well as the environmental attributes, such as temperature, solution chemistry, and radiation. Several key mechanisms that govern these interactions are highlighted. Scientific gaps and open questions are summarized and discussed.

Synthesis of pyrochlore-borosilicate glass-ceramics for immobilization of high-level nuclear waste

2020 ◽  
Vol 46 (5) ◽  
pp. 6085-6094 ◽  
Author(s):  
Kangming Wu ◽  
Fu Wang ◽  
Qilong Liao ◽  
Hanzhen Zhu ◽  
Dongsheng Liu ◽  
...  
Keyword(s):  
Nuclear Waste ◽  
Borosilicate Glass ◽  
Glass Ceramics ◽  
High Level Nuclear Waste ◽  
High Level

Initial Demonstration of the Vitrification of High-Level Nuclear Waste Sludge Containing an Organic Cs-Loaded Ion-Exchange Resin

1992 ◽  
Vol 294 ◽  
Author(s):  
N. E. Bibler ◽  
J. P. Bibler ◽  
M. K. Andrews ◽  
C. M. Jantzen
Keyword(s):  
Ion Exchange ◽  
Nuclear Waste ◽  
Borosilicate Glass ◽  
Exchange Resin ◽  
Ion Exchange Resin ◽  
Waste Sludge ◽  
New Process ◽  
The Usa ◽  
High Level Nuclear Waste ◽  
High Level

ABSTRACTWhen immobilizing into borosilicate glass the radionuclides in the caustic high-level radioactive wastes stored in the USA, the soluble fission product Cs-137 has to be removed from supernates of the wastes. In the current processes zeolites or an organic precipitant will be used to remove the Cs. These are then treated further and mixed with the radioactive sludges and vitrified into a borosilicate glass. This paper describes the vitrification of a mixture resulting from using a new process to remove Cs from the caustic supernate. A resorcinol based organic ion exchange resin is used. This resin was then mixed with sludge and frit and vitrified. Using an organic ion exchange resin rather than zeolite or the organic precipitant has certain advantages. For example, use of the zeolite increases the amount of glass to be made and use of the organic precipitant produces benzene as a secondary waste stream. Results in the paper indicate that a mixture of the resin, sludge and frit can be successfully vitrified in a joule-heated, slurry fed melter. However, when resin is present in the feed, the glass becomes less durable due to the increased amount of Fe(II) caused by reduction of Fe(III) in the melt. Based on the durabilities of other waste glasses, this glass is still suitable as a canistered wasteform.

Sign in / Sign up

Export Citation Format

Share Document