scholarly journals Variation principle in calculating the flow of a two-phase mixture in the pipes of the cooling systems in high-rise buildings

2018 ◽  
Vol 33 ◽  
pp. 02063 ◽  
Author(s):  
Andrey Aksenov ◽  
Anna Malysheva
Keyword(s):  
Channel Cross Section ◽  
Variation Principle ◽  
Two Phase ◽  
Liquid Phases ◽  
Rate Of Increase ◽  
Annular Layer ◽  
Gas Liquid Flow ◽  
The Stability ◽  
Air Conditioning Systems ◽  
Physical Laws

The analytical solution of one of the urgent problems of modern hydromechanics and heat engineering about the distribution of gas and liquid phases along the channel cross-section, the thickness of the annular layer and their connection with the mass content of the gas phase in the gas-liquid flow is given in the paper.The analytical method is based on the fundamental laws of theoretical mechanics and thermophysics on the minimum of energy dissipation and the minimum rate of increase in the system entropy, which determine the stability of stationary states and processes. Obtained dependencies disclose the physical laws of the motion of two-phase media and can be used in hydraulic calculations during the design and operation of refrigeration and air conditioning systems.

Numerical modeling of the influence of bubbles on flow and heat transfer in the descending gas-liquid flow in a pipe

2012 ◽  
Vol 9 (1) ◽  
pp. 131-135
Author(s):  
M.A. Pakhomov
Keyword(s):  
Heat Transfer ◽  
Gas Phase ◽  
Liquid Flow ◽  
Bubble Diameter ◽  
Gas Content ◽  
Two Phase ◽  
Eulerian Description ◽  
Flow And Heat Transfer ◽  
Gas Liquid Flow ◽  
The Mathematical Model

The paper presents the results of modeling the dynamics of flow, friction and heat transfer in a descending gas-liquid flow in the pipe. The mathematical model is based on the use of the Eulerian description for both phases. The effect of a change in the degree of dispersion of the gas phase at the input, flow rate, initial liquid temperature and its friction and heat transfer rate in a two-phase flow. Addition of the gas phase causes an increase in heat transfer and friction on the wall, and these effects become more noticeable with increasing gas content and bubble diameter.

The influence of the Stokes and Archimedes forces on the stability of a two-phase flow

2003 ◽  
Vol 3 ◽  
pp. 266-270
Author(s):  
B.H. Khudjuyerov ◽  
I.A. Chuliev
Keyword(s):  
Spectral Method ◽  
Stability Region ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Solid Phase ◽  
Stability Characteristic ◽  
Phase Flow ◽  
Two Phase ◽  
The Stability

The problem of the stability of a two-phase flow is considered. The solution of the stability equations is performed by the spectral method using polynomials of Chebyshev. A decrease in the stability region gas flow with the addition of particles of the solid phase. The analysis influence on the stability characteristic of Stokes and Archimedes forces.

Two-phase gas-liquid flow in rectangular channels

1984 ◽  
Vol 39 (4) ◽  
pp. 751-765 ◽  
Author(s):  
Leon Troniewski ◽  
Roman Ulbrich
Keyword(s):  
Liquid Flow ◽  
Two Phase ◽  
Rectangular Channels ◽  
Gas Liquid Flow

scholarly journals Experimental investigation of two-phase gas-liquid flow in microchannel with T-junction

2017 ◽  
Vol 159 ◽  
pp. 00004 ◽  
Author(s):  
German Bartkus ◽  
Igor Kozulin ◽  
Vladimir Kuznetsov
Keyword(s):  
Experimental Investigation ◽  
Liquid Flow ◽  
Two Phase ◽  
Gas Liquid Flow

The REPAS Study: Reliability Evaluation of Passive Safety Systems

2002 ◽  
Author(s):  
M. E. Ricotti ◽  
F. Bianchi ◽  
L. Burgazzi ◽  
F. D’Auria ◽  
G. Galassi
Keyword(s):  
Initial Conditions ◽  
Natural Circulation ◽  
Quantitative Information ◽  
External Input ◽  
Passive System ◽  
Two Phase ◽  
Passive Safety Systems ◽  
Safety Systems ◽  
Physical Laws ◽  
Physical Phenomena

The strategy of approach to the problem moves from the consideration that a passive system should be theoretically more reliable than an active one. In fact it does not need any external input or energy to operate and it relies only upon natural physical laws (e.g. gravity, natural circulation, internally stored energy, etc.) and/or “intelligent” use of the energy inherently available in the system (e.g. chemical reaction, decay heat, etc.). Nevertheless the passive system may fail its mission not only as a consequence of classical mechanical failure of components, but also for deviation from the expected behaviour, due to physical phenomena mainly related to thermalhydraulics or due to different boundary and initial conditions. The main sources of physical failure are identified and a probability of occurrence is assigned. The reliability analysis is performed on a passive system which operates in two-phase, natural circulation. The selected system is a loop including a heat source and a heat sink where the condensation occurs. The system behavior under different configurations has been simulated via best-estimate code (Relap5 mod3.2). The results are shown and can be treated in such a way to give qualitative and quantitative information on the system reliability. Main routes of development of the methodology are also depicted.

Sign in / Sign up

Export Citation Format

Share Document