scholarly journals Design and Implementation of a Parabolic Cylinder Collector with Solar Tracking to obtain hot water

2018 ◽  
Vol 57 ◽  
pp. 02003 ◽  
Author(s):  
Wilson E. Sánchez ◽  
Mario P. Jiménez ◽  
Carlos A. Mantilla ◽  
José M. Toro ◽  
Miguel A. Villa ◽  
...  
Keyword(s):  
Heat Pipe ◽  
Tracking System ◽  
Heating System ◽  
Hot Water ◽  
Parabolic Cylinder ◽  
Charging System ◽  
Design And Implementation ◽  
Solar Tracking ◽  
Deflection Analysis ◽  
Solar Tracker

This investigation describes the design and implementation of a parabolic trough solar collector (PCC) with solar tracking to obtain hot water. The solar radiation available at the installation site is analyzed, followed by the design and construction of the mechanical system, making a series of calculations for the dimensioning of the reflective base, and a stress and deflection analysis of the structure is performed to verify the feasibility of the design in the ANSYS software. An analysis of the solar tracking system is performed, which is dimensioned from the PCC structure to determine the type of solar tracker to implement; The charging system, consisting of a solar panel and a battery, is dimensioned for the power supply of the tracking system; as a last point, for the heating system is determined the amount of water that is able to heat the system from the energy analysis at the installation site, the heating system is based on placing a Heat Pipe, in the focus of the parabola to receive the solar rays reflected by the collector and heat exchange to the water from a thermowell where the heat pipe condenser enters, finally tests are carried out in the PCC implemented obtaining a global efficiency of 16.37%.

scholarly journals Design and implementation of an automatically aligned solar tracking system

2019 ◽  
Vol 10 (4) ◽  
pp. 2055
Author(s):  
Anees Abu Sneineh ◽  
Wael A. Salah
Keyword(s):  
Closed Loop ◽  
Tracking System ◽  
Low Cost ◽  
Electrical Energy ◽  
Clean Energy ◽  
Design And Implementation ◽  
Solar Tracking ◽  
Photo Sensor ◽  
Wide Availability ◽  
Solar Tracker

This paper presents the design and implementation of a closed-loop solar tracker system. The demand for clean energy sources has increased along with the rising demand for electrical energy and the increasing amount of environment pollution triggered by fuel consumption. Among these sources, solar energy is considered the most feasible given its wide availability and easy operation in different environments. The main purpose of this study is to maximize the generated photovoltaic power and reduce CO<sub>2</sub> emissions by designing an efficient and low-cost solar tracking system. An aligned closed-loop solar tracker is designed and constructed to achieve the best accuracy. The proposed system shows more freedom in its movement to overcome the problems associated with the tilt of the frame-holder. A PIC microcontroller based on the Flowcode programming language is used, the position feedback is detected by using a photo-sensor, and the H-Bridge driver is used to control two DC motors. According to the experimental results, the proposed system shows significant improvements in efficiency compared with stationary solar tracking systems.

Evacuated Tube Heat Pipe Solar Collectors Applied to Recirculation Loop in a Federal Building: SSA Philadelphia

Solar Energy ◽  
2004 ◽  
Author(s):  
Andy Walker ◽  
Fariborz Mahjouri ◽  
Robert Stiteler
Keyword(s):  
Solar Energy ◽  
Heat Pipe ◽  
Heat Loss ◽  
Heating System ◽  
Hot Water ◽  
Solar Array ◽  
Solar Collectors ◽  
Water Heating ◽  
Evacuated Tube ◽  
Recirculation Loop

This paper describes design, simulation, construction and measured initial performance of a solar water heating system (360 Evacuated Heat-Pipe Collector tubes, 54 m2 gross area, 36 m2 net absorber area) installed at the top of the hot water recirculation loop in the Social Security Mid-Atlantic Center in Philadelphia. Water returning to the hot water storage tank is heated by the solar array when solar energy is available. This new approach, as opposed to the more conventional approach of preheating incoming water, is made possible by the thermal diode effect of heat pipes and low heat loss from evacuated tube solar collectors. The simplicity of this approach and its low installation costs makes the deployment of solar energy in existing commercial buildings more attractive, especially where the roof is far removed from the water heating system, which is often in the basement. Initial observed performance of the system is reported. Hourly simulation estimates annual energy delivery of 111 GJ/year of solar heat and that the annual efficiency (based on the 54 m2 gross area) of the solar collectors is 41%, and that of the entire system including parasitic pump power, heat loss due to freeze protection, and heat loss from connecting piping is 34%. Annual average collector efficiency based on a net aperture area of 36 m2 is 61.5% according to the hourly simulation.

scholarly journals Development of an Advanced Solar Tracking Energy System

2021 ◽  
pp. 77-82
Author(s):  
Samuel Davies ◽  
Sivagunalan Sivanathan ◽  
Ewen Constant ◽  
Kary Thanapalan
Keyword(s):  
Control System ◽  
System Performance ◽  
Mechanical Design ◽  
System Development ◽  
Tracking System ◽  
Energy System ◽  
Design And Implementation ◽  
Solar Tracking ◽  
Advanced Control ◽  
Stability Issues

AbstractThis paper describes the design of an advanced solar tracking system development that can be deployed for a range of applications. The work focused on the design and implementation of an advanced solar tracking system that follow the trajectory of the sun’s path to maximise the power capacity generated by the solar panel. The design concept focussed on reliability, cost effectiveness, and scalability. System performance is of course a key issue and is at the heart of influencing the hardware, software and mechanical design. The result ensured a better system performance achieved. Stability issues were also addressed, in relation to optimisation and reliability. The paper details the physical tracker device developed as a prototype, as well as the proposed advanced control system for optimising the tracking.

scholarly journals Dual Axis Solar Tracker with Weather Sensor

2019 ◽  
Vol 8 (2S11) ◽  
pp. 3308-3311
Keyword(s):  
Energy Conversion ◽  
Tracking System ◽  
Weather Conditions ◽  
Maximum Amount ◽  
Control Element ◽  
Sensing Element ◽  
Advanced Level ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Arduino Uno

This paper presents the outline and execution of simple, easy and cheaper automatic dual axis solar tracking system using Arduino UNO as the control element and light detecting sensors (LDRS) as the sensing element. This project involves advanced level of technology to capture maximum amount of energy using sun’s radiations. The main purpose is to increase the efficiency of tracking system which can rotate in all four directions continuously according to intensity of radiations and for energy conversion. In this, the voltage from panel is calculated from time to time in an interval of 1hr and this voltage is used to sense the weather conditions and display the climatic temperatures

scholarly journals Development of Solar Powered Sprinkler Robot Based on Watering Plant Using IOT Approach

2021 ◽  
Vol 2107 (1) ◽  
pp. 012024
Author(s):  
Lim Xin You ◽  
Nordiana Shariffudin ◽  
Mohd Zamri Hasan
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
System Analysis ◽  
Tracking System ◽  
Sprinkler System ◽  
Solar Panel ◽  
Maximum Efficiency ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Solar Powered

Abstract Nowadays, solar energy’s popularity is growing consistently every year, along with the growth of amazing solar technologies, which is considered to be one of the most popular. Non-renewable energy like petrol and gasoline is being replaced with solar energy, which is renewable energy. The main objective of this project is to design and simulate a robot solar system. The robot is developed using Arduino Mega 2560 as the main brain of the system. This system is equipped with a solar tracking system to track the movement of the sun and LDR is used to detect the presence of sunlight. The solar tracker is used to get the maximum efficiency of solar energy and reduce power losses. In addition, the solar tracker can rotate from 0° - 180°, which is the best angle for the solar panel to reach the sunlight. This robot will be attached to the sprinkler system to perform the watering process. This robot is developed for use in the agriculture field to reduce the manpower and cost of the watering process. Three analyses will be conducted in this project such as solar panel analysis, Wi-Fi connectivity analysis and sprinkler system analysis. The result shows the solar panel will gain the highest intensity of the sunlight at 12.00 pm and a sunny day compared to the other time and a cloudy day. The maximum range of Wi-Fi connectivity and the water pump, time used to finish the watering process and watering area will be discussed.

scholarly journals Optimized Single-Axis Schedule Solar Tracker in Different Weather Conditions

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5226
Author(s):  
Nurzhigit Kuttybay ◽  
Ahmet Saymbetov ◽  
Saad Mekhilef ◽  
Madiyar Nurgaliyev ◽  
Didar Tukymbekov ◽  
...  
Keyword(s):  
Rotation Angle ◽  
Tracking System ◽  
Weather Conditions ◽  
Main Task ◽  
Solar Panels ◽  
Simple Method ◽  
Solar Tracking ◽  
Rainy Weather ◽  
Solar Tracker ◽  
One Year

Improving the efficiency of solar panels is the main task of solar energy generation. One of the methods is a solar tracking system. One of the most important parameters of tracking systems is a precise orientation to the Sun. In this paper, the performance of single-axis solar trackers based on schedule and light dependent resistor (LDR) photosensors, as well as a stationary photovoltaic installation in various weather conditions, were compared. A comparative analysis of the operation of a manufactured schedule solar tracker and an LDR solar tracker in different weather conditions was performed; in addition, a simple method for determining the rotation angle of a solar tracker based on the encoder was proposed. Finally, the performance of the manufactured solar trackers was calculated, taking into account various weather conditions for one year. The proposed single-axis solar tracker based on schedule showed better results in cloudy and rainy weather conditions. The obtained results can be used for designing solar trackers in areas with a variable climate.

Design and Performance Analysis of Automatic Solar Tracking System

2015 ◽  
Vol 793 ◽  
pp. 353-357
Author(s):  
F.S. Abdullah ◽  
H.M. Nuhafiz ◽  
O. Mardianaliza ◽  
A. Yusof ◽  
Noor Anida
Keyword(s):  
Performance Analysis ◽  
Power Supply ◽  
Electronic Circuit ◽  
Tracking System ◽  
Solar Panel ◽  
Solar Irradiation ◽  
Dc Motors ◽  
Solar Tracking ◽  
Solar Tracker ◽  
And Performance

Solar tracker is a device that detects the movement of the sun. Solar tracker receive maximum sun ray in order to produce the maximum power supply by the photovoltaic (PV) panels system. It also depends on the environment factor such as solar irradiation and temperature of the panels. This paper presents the development of the automatic solar tracking system, the construction of the sensor circuit, programming of the control system and also its performance analysis. This automatic solar tracking system is designed with an electronic circuit control using PIC that can trigger the dc motors when the LDR sensors detect sunlight. DC motor will move vertical and 360 ̊ horizontal to increase efficiency of sunlight to the solar panel. Solar panel for the project gets power supply from the battery. The battery will be charged using power from the solar panel.

Laboratory-Scale Single Axis Solar Tracking System: Design and Implementation

2016 ◽  
Vol 7 (1) ◽  
pp. 254 ◽  
Author(s):  
Allan Soon Chan Roong ◽  
Shin-Horng Chong
Keyword(s):  
System Design ◽  
High Performance ◽  
Tracking System ◽  
High Accuracy ◽  
Laboratory Scale ◽  
Performance Ratio ◽  
Design And Development ◽  
Design And Implementation ◽  
Solar Tracking ◽  
Angle Of Rotation

This paper presents the design and development of a laboratory-scale single axis solar tracking system. The chronological method was implemented into the system because it has high accuracy and can save more energy as compared to other types of solar tracking system. The laboratory-scale single axis solar tracking system can be used to identify the suitable and safe workspace for the installation of the actual solar tracking system plant. Besides, the validity of the laboratory-scale single axis solar tracking system was examined experimentally. The angle of rotation, per hour is preferable to be implemented into the designed laboratory-scale single axis sun tracking system due to the high performance ratio which is 0.83 and can save the energy up  to 25% during sunny days.

Seven-Point Solar Tracking Control for a Fiber-Optic Daylighting System

2020 ◽  
Vol 143 (2) ◽  
Author(s):  
Rahate Ahmed ◽  
Yeongmin Kim ◽  
Zeeshan ◽  
Muhammad Uzair Mehmood ◽  
Hyun Joo Han ◽  
...  
Keyword(s):  
Tracking Control ◽  
Tracking System ◽  
Weather Conditions ◽  
Fresnel Lens ◽  
Solar Tracking ◽  
Stepper Motors ◽  
Solar Tracker ◽  
Series Of Experiments ◽  
Optical Fiber Cable ◽  
Cloud Effect

Abstract A strategy for precise solar tracking has been developed using feedback signals from seven photosensors in conjunction with the operation of an active daylighting system. The tracking system was composed of a microcontroller, two stepper motors, photosensors, a grooves-in Fresnel lens concentrator, and a glass optical fiber cable. A robust control was implemented using cadmium sulfide (CdS) sensors to track the sun’s path precisely from sunrise to sunset. To avoid the cloud effect, two separate sensors were installed apart from the main tracking sensors. The control system was allowed to track the sun’s position if clouds covered the sky continuously for less than approximately 70 min. To analyze the performance of the solar tracker for daylighting applications, a series of experiments were performed in different weather conditions where the accuracy and effectiveness of the present solar tracking control were confirmed.

Modeling of a Wellhead Heating Methodology With Heat Pipes in Coal Mines

2020 ◽  
Vol 143 (1) ◽  
Author(s):  
Hongyang Zhang ◽  
Kewen Li ◽  
Lipeng Zhao ◽  
Lin Jia ◽  
Mohammed Kaita ◽  
...  
Keyword(s):  
Heat Pipe ◽  
New Technologies ◽  
Low Cost ◽  
Coal Mines ◽  
Heat Pipes ◽  
Heating System ◽  
Heat Pumps ◽  
Hot Water ◽  
Winter Period ◽  
Ground Source Heat Pumps

Abstract Many coal mines are located at the middle and high latitudes. In winter, coal mining facilities may be operated under the freezing conditions. Burning coal for hot water is usually used to heat up the facilities, which is not environmentally friendly and energy efficient. Currently, the ground source heat pumps and other new technologies have been applied for heating in coal mines and have achieved some success. However, the working characteristics and costs of these technologies are not suitable for the antifreeze at the wellhead. Heat pipe technology has the following advantages: automatic operation with the change of atmosphere temperature (AMT) and low cost of construction and maintenance, which can overcome the drawbacks of the aforementioned technologies. In this article, a heating system based on heat pipe technology has been designed and modeled. The system extracts heat from the shallow normal temperature zone (NTZ) to automatically heat the coal wellhead in winter. For the heating system, the effects of AMT, the temperature of NTZ, the frozen zone thickness (FZT), the thermal conductivity, and the heat pipe quantity (HPQ) on the heating performance have been modeled and investigated using comsol multiphysics. The modeling results have been analyzed and discussed. The modeling data showed that the system based on heat pipes could meet the antifreeze requirements for the designed system during the winter period. The wellhead heating system proposed in this article may achieve the purpose of replacing fossil energy with shallow geothermal energy.

Sign in / Sign up

Export Citation Format

Share Document