scholarly journals Computational Study Of Curved Underbody Diffusers

2019 ◽  
Vol 128 ◽  
pp. 10002
Author(s):  
Angel Huminic ◽  
Gabriela Huminic
Keyword(s):  
Computational Study ◽  
Aerodynamic Characteristics ◽  
Passenger Car ◽  
Lift And Drag ◽  
Underbody Diffuser ◽  
Ahmed Body

This paper presents new results concerning the aerodynamics of the Ahmed body fitted with a non-flat underbody diffuser. As in previous investigations performed, the angle and the length of the diffuser are the parameters systematically varied within ranges relevant for a hatchback passenger car. Coefficients of lift and drag are compared with the values obtained for the flat underbody diffuser, and the results reveal significant improvements concerning aerodynamic characteristics of body.

scholarly journals Computational study on an Ahmed Body equipped with simplified underbody diffuser

2021 ◽  
Vol 209 ◽  
pp. 104411
Author(s):  
Filipe F. Buscariolo ◽  
Gustavo R.S. Assi ◽  
Spencer J. Sherwin
Keyword(s):  
Computational Study ◽  
Underbody Diffuser ◽  
Ahmed Body

Numerical study of geometric morphing wings of the 1303 UCAV

2021 ◽  
pp. 1-17
Author(s):  
B. Nugroho ◽  
J. Brett ◽  
B.T. Bleckly ◽  
R.C. Chin
Keyword(s):  
Flight Control ◽  
Numerical Study ◽  
Aerodynamic Characteristics ◽  
Morphing Wing ◽  
Rolling Moment ◽  
Wide Range ◽  
Morphing Wings ◽  
Wing Geometry ◽  
Lift And Drag ◽  
Wing Morphing

ABSTRACT Unmanned Combat Aerial Vehicles (UCAVs) are believed by many to be the future of aerial strike/reconnaissance capability. This belief led to the design of the UCAV 1303 by Boeing Phantom Works and the US Airforce Lab in the late 1990s. Because UCAV 1303 is expected to take on a wide range of mission roles that are risky for human pilots, it needs to be highly adaptable. Geometric morphing can provide such adaptability and allow the UCAV 1303 to optimise its physical feature mid-flight to increase the lift-to-drag ratio, manoeuvrability, cruise distance, flight control, etc. This capability is extremely beneficial since it will enable the UCAV to reconcile conflicting mission requirements (e.g. loiter and dash within the same mission). In this study, we conduct several modifications to the wing geometry of UCAV 1303 via Computational Fluid Dynamics (CFD) to analyse its aerodynamic characteristics produced by a range of different wing geometric morphs. Here we look into two specific geometric morphing wings: linear twists on one of the wings and linear twists at both wings (wash-in and washout). A baseline CFD of the UCAV 1303 without any wing morphing is validated against published wind tunnel data, before proceeding to simulate morphing wing configurations. The results show that geometric morphing wing influences the UCAV-1303 aerodynamic characteristics significantly, improving the coefficient of lift and drag, pitching moment and rolling moment.

Computational Study of the Risø-B1-18 Airfoil with a Hinged Flap Providing Variable Trailing Edge Geometry

2005 ◽  
Vol 29 (2) ◽  
pp. 89-113 ◽  
Author(s):  
Niels Troldborg
Keyword(s):  
Reynolds Number ◽  
Unsteady Flow ◽  
Computational Study ◽  
Turbine Blades ◽  
Aerodynamic Characteristics ◽  
Flow Conditions ◽  
Wind Turbine Blades ◽  
Trailing Edge ◽  
Edge Geometry ◽  
Fully Developed Turbulent Flow

A comprehensive computational study, in both steady and unsteady flow conditions, has been carried out to investigate the aerodynamic characteristics of the Risø-B1-18 airfoil equipped with variable trailing edge geometry as produced by a hinged flap. The function of such flaps should be to decrease fatigue-inducing oscillations on the blades. The computations were conducted using a 2D incompressible RANS solver with a k-w turbulence model under the assumption of a fully developed turbulent flow. The investigations were conducted at a Reynolds number of Re = 1.6 · 106. Calculations conducted on the baseline airfoil showed excellent agreement with measurements on the same airfoil with the same specified conditions. Furthermore, a more widespread comparison with an advanced potential theory code is presented. The influence of various key parameters, such as flap shape, flap size and oscillating frequencies, was investigated so that an optimum design can be suggested for application with wind turbine blades. It is concluded that a moderately curved flap with flap chord to airfoil curve ratio between 0.05 and 0.10 would be an optimum choice.

An Investigation of Flow Fields Over Multi-Element Aerofoils

2001 ◽  
Vol 124 (1) ◽  
pp. 154-165 ◽  
Author(s):  
S. R. Maddah ◽  
H. H. Bruun
Keyword(s):  
Flow Field ◽  
Computational Study ◽  
Separated Flow ◽  
Mean Flow ◽  
Model Configuration ◽  
Attached Flow ◽  
The Mean ◽  
Flap Deflection ◽  
Comparative Results ◽  
Lift And Drag

This paper presents results obtained from a combined experimental and computational study of the flow field over a multi-element aerofoil with and without an advanced slat. Detailed measurements of the mean flow and turbulent quantities over a multi-element aerofoil model in a wind tunnel have been carried out using stationary and flying hot-wire (FHW) probes. The model configuration which spans the test section 600mm×600mm, is made of three parts: 1) an advanced (heel-less) slat, 2) a NACA 4412 main aerofoil and 3) a NACA 4415 flap. The chord lengths of the elements were 38, 250 and 83 mm, respectively. The results were obtained at a chord Reynolds number of 3×105 and a free Mach number of less than 0.1. The variations in the flow field are explained with reference to three distinct flow field regimes: attached flow, intermittent separated flow, and separated flow. Initial comparative results are presented for the single main aerofoil and the main aerofoil with a nondeflected flap at angles of attacks of 5, 10, and 15 deg. This is followed by the results for the three-element aerofoil with emphasis on the slat performance at angles of attack α=10, 15, 20, and 25 deg. Results are discussed both for a nondeflected flap δf=0deg and a deflected flap δf=25deg. The measurements presented are combined with other related aerofoil measurements to explain the main interaction of the slat/main aerofoil and main aerofoil/flap both for nondeflected and deflected flap conditions. These results are linked to numerically calculated variations in lift and drag coefficients with angle of attack and flap deflection angle.

An Analysis of the Aerodynamic Characteristics of Split Flaps

1940 ◽  
Vol 44 (352) ◽  
pp. 338-349
Author(s):  
A. P. West
Keyword(s):  
Experimental Data ◽  
Aerodynamic Characteristics ◽  
Full Scale ◽  
The Other ◽  
Aircraft Industry ◽  
The Past ◽  
The Many ◽  
Lift And Drag ◽  
Scale Data

During the past few years an extensive amount of experimental data on split flaps has been made available to the aircraft industry, through the publications of aeronautical research laboratories, both in this country and abroad. In general, each publication deals with one particular aspect of the problem, and when the effect of wing flaps on the performance of an aircraft is being estimated a certain amount of difficulty may be experienced in deciding which of the many reports available gives results most readily applicable to the case being considered ; and what allowances, if any, should be made for wing taper, flap cut-out, fuselage, etc.In this report the available data has been analysed with a view to answering these questions, and presented in such a form that it may be readily applied to determine the most probable change in the aerodynamic characteristics of a wing that may be expected from the use of this type of flap.From the appendix an estimate of the accuracy of the method can be obtained, as a comparison with full-scale data is given for lift and drag, and for the other flap characteristics the original curves have been reproduced.

scholarly journals Numerical simulation of icing effect on aerodynamic characteristics of a wind turbine blade

2021 ◽  
Vol 25 (6 Part B) ◽  
pp. 4643-4650
Author(s):  
Yan Li ◽  
Lei Shi ◽  
Wen-Feng Guo ◽  
Kotaro Tagawa ◽  
Bin Zhao
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Aerodynamic Characteristics ◽  
Wind Turbine Blade ◽  
Horizontal Axis Wind Turbine ◽  
Ambient Temperatures ◽  
Research Findings ◽  
Simulation Results ◽  
Lift And Drag ◽  
Lift And Drag Coefficient

Icing accretion on wind turbine will degrade its performance, resulting in reduction of output power and even leading to accidents. For solving this problem, it is necessary to predict the icing type and shape on wind turbine blade, and evaluate the variation of aerodynamic characteristics. In this paper the icing types and shapes in presence of airfoil, selected from blade of 1.5 MW horizontal-axis wind turbine, are simulated under different ambient temperatures and icing time lengths. Based on the icing simulation results, the aerodynamic characteristics of icing airfoils are simulated, including lift and drag coefficient, lift-drag ratio, etc. The simulation results show that the glaze ice with two horns presents on airfoil under high ambient temperature such as -5?C. When ambient temperatures are low, such as -10?C and -15?C, the rime ices with streamline profiles present on the airfoil. With increase in icing time the lift forces and coefficients decrease, and the drag ones increase. According to the variations of lift-drag ratios of icing airfoil, the aerodynamic performance of airfoil deteriorates in the presence of icing. The glaze ice has great effect on aerodynamic characteristics of airfoil. The research findings lay theoretical foundation for icing wind tunnel experiment.

Cavity for Flow Control and Performance Improvement of Airfoil

2021 ◽  
Author(s):  
Anand Verma ◽  
Bastav Borah ◽  
Vinayak Kulkarni
Keyword(s):  
Moving Boundary ◽  
Flow Analysis ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Suction Surface ◽  
Confined Spaces ◽  
Steady Simulation ◽  
And Performance ◽  
Lift And Drag ◽  
Fluid Flow Analysis

Abstract The fluid flow analysis over a cambered airfoil having three different cavity locations on the suction surface is reported in this paper. The Elliptical cavity is created at LE, MC, and TE along chordwise locations from the leading to trailing edge. In this regard, the steady simulation is carried out in the Fluent at Reynolds number of 105 based on their chord length. The lift and drag characteristics for clean and cavities airfoil are investigated at different angles of attack. For the clean airfoil, the stall point is observed at 18°. The presence of a cavity improves the stall and aerodynamic characteristics of airfoil. It has been seen that the lift and drag coefficients for pre-stalled or lower angles are nearly similar to clean and cavity at MC or TE positions. For the post-stall point, the improvement in the aerodynamic performance is seen for the cavity at MC or TE. The cavity placed at LE produces lower lift and higher drag characteristics against other configuration models. The overall cavity effect for the flow around the airfoil is that it creates vortices, thereby re-energizes the slower moving boundary layer and delays the flow separation in the downstream direction. The outcomes of this analysis are suggested that the cavity at a position before the mid chord from the leading edge does not improve the performance of the airfoil. Though vortex is formed in the confined spaces but it is unable to reattach the flow towards the downstream direction of an airfoil.

Research on Aerodynamic Characteristics of a Simplified SUV Model

2013 ◽  
Vol 275-277 ◽  
pp. 603-606 ◽  
Author(s):  
Xing Jun Hu ◽  
Lei Liao ◽  
Jing Yu Wang ◽  
Li Min Fu
Keyword(s):  
Drag Coefficient ◽  
Pressure Distribution ◽  
Aerodynamic Characteristics ◽  
Drag And Lift Coefficients ◽  
Transition Radius ◽  
Drag And Lift ◽  
Underbody Diffuser

The aerodynamics characteristics of square Mira model were researched by simulation, the drag coefficient and the aerodynamic characteristics around model were achieved with analysis of velocity and pressure distribution. Based on results, the angle of rear wind window, the angle of underbody diffuser and the front transition radius were changed, the drag and lift coefficients were achieved. The conclusions provide reference for how to reduce drag coefficient of SUV

AERODYNAMIC OF UITM'S BLENDED-WING-BODY UNMANNED AERIAL VEHICLE BASELINE-II EQUIPPED WITH ONE CENTRAL VERTICAL RUDDER

2015 ◽  
Vol 75 (8) ◽  
Author(s):  
Wirachman Wisnoe ◽  
Rizal E.M. Nasir ◽  
Ramzyzan Ramly ◽  
Wahyu Kuntjoro ◽  
Firdaus Muhammad
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Cfd Simulation ◽  
Aerodynamic Characteristics ◽  
Control Surface ◽  
Wind Tunnel Experiments ◽  
Aerodynamic Parameter ◽  
Aerial Vehicle ◽  
Computational Fluid Dynamics Cfd ◽  
Blended Wing Body ◽  
Lift And Drag

In this paper, a study of aerodynamic characteristics of UiTM's Blended-Wing-Body Unmanned Aerial Vehicle (BWB-UAV) Baseline-II in terms of side force, drag force and yawing moment coefficients are presented through Computational Fluid Dynamics (CFD) simulation. A vertical rudder is added to the aircraft at the rear centre part of the fuselage as yawing control surface. The study consists of varying the side slip angles for various rudder deflection angles and to plot the results for each aerodynamic parameter. The comparison with other yawing control surface for the same aircraft obtained previously are also presented. For validation purpose, the lift and drag coefficients are compared with the results obtained from wind tunnel experiments. 

scholarly journals Aerodynamic Analysis of a Flapping Wing Aircraft for Short Landing

2020 ◽  
Vol 10 (10) ◽  
pp. 3404
Author(s):  
Bing Ji ◽  
Zenggang Zhu ◽  
Shijun Guo ◽  
Si Chen ◽  
Qiaolin Zhu ◽  
...  
Keyword(s):  
Aerodynamic Characteristics ◽  
Flapping Wing ◽  
Aerodynamic Analysis ◽  
Drag Forces ◽  
Wing Model ◽  
Aerodynamic Model ◽  
Computational Fluid Dynamics Cfd ◽  
The Difference ◽  
Cfd Method ◽  
Lift And Drag

An investigation into the aerodynamic characteristics has been presented for a bio-inspired flapping wing aircraft. Firstly, a mechanism has been developed to transform the usual rotation powered by a motor to a combined flapping and pitching motion of the flapping wing. Secondly, an experimental model of the flapping wing aircraft has been built and tested to measure the motion and aerodynamic forces produced by the flapping wing. Thirdly, aerodynamic analysis is carried out based on the measured motion of the flapping wing model using an unsteady aerodynamic model (UAM) and validated by a computational fluid dynamics (CFD) method. The difference of the average lift force between the UAM and CFD method is 1.3%, and the difference between the UAM and experimental results is 18%. In addition, a parametric study is carried out by employing the UAM method to analyze the effect of variations of the pitching angle on the aerodynamic lift and drag forces. According to the study, the pitching amplitude for maximum lift is in the range of 60°~70° as the flight velocity decreases from 5 m/s to 1 m/s during landing.

Sign in / Sign up

Export Citation Format

Share Document