scholarly journals Measured and simulated energy performance of OLK NZEB with heat pump and energy piles in Hämeenlinna

2020 ◽  
Vol 172 ◽  
pp. 16012
Author(s):  
Jevgeni Fadejev ◽  
Raimo Simson ◽  
Jyrki Kesti ◽  
Jarek Kurnitski
Keyword(s):  
Heat Pump ◽  
Model Calibration ◽  
Energy Use ◽  
Calibration Procedure ◽  
Energy Performance ◽  
Monthly Basis ◽  
Climate Conditions ◽  
Building Model ◽  
Measured Energy ◽  
Energy Piles

In this work, measured energy use of the building space heating, ventilation supply air heating, appliances and lighting is compared against simulated energy use modelled in IDA ICE. As built energy need and detailed measured input data is applied in building model calibration procedure. Calibrated building model energy performance is studied in both measured and test reference year climate conditions. Previously modelled as built plant automation and implemented control logics are compared against measured. Geothermal plant in this study consists of heat pump, solar collectors, boreholes and energy piles. Heat pump SCOP estimated by post processing according to heat pump manufacturer’s performance map is compared against measured SCOP on the monthly basis. Opinion on actual plant operation is given and energy performance improvement potential is quantified. Important parameters for successful building model calibration are presented. Building compliance with Finland NZEB requirements are assessed. The results show good match with measured energy use after the model calibration.

scholarly journals Performance Analysis of Air-to-Water Heat Pump in Latvian Climate Conditions

2014 ◽  
Vol 14 (1) ◽  
pp. 18-22 ◽  
Author(s):  
Janis Kazjonovs ◽  
Andrejs Sipkevics ◽  
Andris Jakovics ◽  
Andris Dancigs ◽  
Diana Bajare ◽  
...  
Keyword(s):  
Heat Pump ◽  
Air Temperature ◽  
Residential Buildings ◽  
Winter Season ◽  
Pump Energy ◽  
Energy Performance ◽  
Coefficient Of Performance ◽  
Heating Period ◽  
Climate Conditions ◽  
Eu Directive

Abstract Strategy of the European Union in efficient energy usage demands to have a higher proportion of renewable energy in the energy market. Since heat pumps are considered to be one of the most efficient heating and cooling systems, they will play an important role in the energy consumption reduction in buildings aimed to meet the target of nearly zero energy buildings set out in the EU Directive 2010/31/EU. Unfortunately, the declared heat pump Coefficient of Performance (COP) corresponds to a certain outdoor temperature (+7 °C), therefore different climate conditions, building characteristics and settings result in different COP values during the year. The aim of this research is to investigate the Seasonal Performance factor (SPF) values of air-to-water heat pump which better characterize the effectiveness of heat pump in a longer selected period of time, especially during the winter season, in different types of residential buildings in Latvian climate conditions. Latvia has four pronounced seasons of near-equal length. Winter starts in mid-December and lasts until mid-March. Latvia is characterized by cold, maritime climate (duration of the average heating period being 203 days, the average outdoor air temperature during the heating period being 0.0 °C, the coldest five-day average temperature being −20.7 °C, the average annual air temperature being +6.2 °C, the daily average relative humidity being 79 %). The first part of this research consists of operational air-towater heat pump energy performance monitoring in different residential buildings during the winter season. The second part of the research takes place under natural conditions in an experimental construction stand which is located in an urban environment in Riga, Latvia. The inner area of this test stand, where air-to-water heat pump performance is analyzed, is 9 m2. The ceiling height is 3 m, all external wall constructions (U = 0.16 W/(m2K)) have ventilated facades. To calculate SPF, the experimental stand is equipped with sensors which provide measurements for electricity consumption and gained heat energy.

scholarly journals Indoor climate and energy performance in nearly zero energy day care centers and school buildings

2019 ◽  
Vol 111 ◽  
pp. 02003 ◽  
Author(s):  
Kaiser Ahmed ◽  
Kalle Kuusk ◽  
Henrik Heininen ◽  
Endrik Arumägi ◽  
Targo Kalamees ◽  
...  
Keyword(s):  
Energy Use ◽  
Ventilation System ◽  
Energy Performance ◽  
Physical Parameters ◽  
Airflow Rate ◽  
Full Time ◽  
Indoor Climate ◽  
Indoor Temperature ◽  
Measured Energy ◽  
Time Operation

This study presents the assessment of actual indoor climate condition and energy performance in eight NZEB school and daycare centers of NERO H2020 project. Physical parameters such as indoor temperature, relative humidity, CO2, airflow rate and temperature were measured during heating and cooling seasons, in parallel with an occupants’ questionnaires survey. Besides, calculated and measured energy data was collected from energy performance certificates and energy bills. Thermal comfort and IAQ were assessed based on categories in EN15251 standard with color footprints. Results showed that all the buildings had good or excellent indoor climate during the heating season. However, a large percentage of occupied hours were categorized as category IV during the cooling season, which mainly occurred due to too low indoor temperature caused by the low outdoor temperature during the measurement period. Also, all buildings achieved low CO2 levels. Moreover, the conducted questionaries’ survey showed good correlation with measured results for all buildings except in one building, which had odor and noise problems. In contrast, the measured energy use in 5 buildings out of 7 was increased by factor 2.1-3.0 compared to calculated annual energy use due to a full-time operation of the ventilation system and presence of hot kitchens.

scholarly journals Benchmarks for Embodied and Operational Energy Assessment of Hellenic Single-Family Houses

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4384
Author(s):  
Elena G. Dascalaki ◽  
Poulia A. Argiropoulou ◽  
Constantinos A. Balaras ◽  
Kalliopi G. Droutsa ◽  
Simon Kontoyiannidis
Keyword(s):  
Energy Use ◽  
Energy Intensity ◽  
Construction Materials ◽  
Energy Performance ◽  
Embodied Energy ◽  
Single Family ◽  
Zero Energy ◽  
Relative Significance ◽  
Climate Conditions ◽  
Operational Energy

Building energy performance benchmarking increases awareness and enables stakeholders to make better informed decisions for designing, operating, and renovating sustainable buildings. In the era of nearly zero energy buildings, the embodied energy along with operational energy use are essential for evaluating the environmental impacts and building performance throughout their lifecycle. Key metrics and baselines for the embodied energy intensity in representative Hellenic houses are presented in this paper. The method is set up to progressively cover all types of buildings. The lifecycle analysis was performed using the well-established SimaPro software package and the EcoInvent lifecycle inventory database, complemented with national data from short energy audits carried out in Greece. The operational energy intensity was estimated using the national calculation engine for assessing the building’s energy performance and the predictions were adapted to obtain more realistic estimates. The sensitivity analysis for different type of buildings considered 16 case studies, accounting for representative construction practices, locations (climate conditions), system efficiencies, renovation practices, and lifetime of buildings. The results were used to quantify the relative significance of operational and embodied energy, and to estimate the energy recovery time for popular energy conservation and energy efficiency measures. The derived indicators reaffirm the importance of embodied energy in construction materials and systems for new high performing buildings and for renovating existing buildings to nearly zero energy.

scholarly journals Empirical and Numerical Analysis of an Opaque Ventilated Facade with Windows Openings under Mediterranean Climate Conditions

Mathematics ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 163
Author(s):  
Carlos-Antonio Domínguez-Torres ◽  
Ángel Luis León-Rodríguez ◽  
Rafael Suárez ◽  
Antonio Domínguez-Delgado
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Field Measurements ◽  
Energy Performance ◽  
Total Energy Consumption ◽  
Building Stock ◽  
Climate Conditions ◽  
Ventilated Facade ◽  
Indoor Comfort

In recent years, there has been growing concern regarding energy efficiency in the building sector with energy requirements increasing worldwide and now responsible for about 40% of final energy consumption in Europe. Previous research has shown that ventilated façades help to reduce energy use when cooling buildings in hot and temperate climates. Of the different ventilated façade configurations reported in the literature, the configuration of ventilated façade with window rarely has been studied, and its 3D thermodynamic behavior is deserving of further analysis and modeling. This paper examines the thermal behavior of an opaque ventilated façade with a window, in experimentally and numerical terms and its impact in energy savings to get indoor comfort. Field measurements were conducted during the winter, spring and summer seasons of 2021 using outdoor full scale test cells located in Seville (southern Spain). The modeling of the ventilated façade was carried out using a three-dimensional approach taking into account the 3D behavior of the air flow in the air cavity due to the presence of the window. The validation and comparison process using experimental data showed that the proposed model provided good results from quantitative and qualitative point of view. The reduction of the heat flux was assessed by comparing the energy performance of a ventilated façade with that of an unventilated façade. Both experimental and numerical results showed that the ventilated façade provided a reduction in annual total energy consumption when compared to the unventilated façade, being compensated the winter energy penalization by the summer energy savings. This reduction is about 21% for the whole typical climatic year showing the ability of the opaque ventilated façade studied to reduce energy consumption to insure indoor comfort, making its suitable for use in retrofitting the energy-obsolete building stock built in Spain in the middle decades of the 20 century.

Modelling energy use in residential buildings: How design decisions influence final energy performance in various Chilean climates

2018 ◽  
Vol 28 (4) ◽  
pp. 533-551 ◽  
Author(s):  
François Simon ◽  
Javier Ordoñez ◽  
Aymeric Girard ◽  
Cristobal Parrado
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Residential Buildings ◽  
Building Design ◽  
Energy Performance ◽  
Building Envelope ◽  
Design Decisions ◽  
Climate Conditions ◽  
Final Energy ◽  
Effective Manner

To reduce the energy consumption in buildings, there is a demand for tools that identify significant parameters of energy performance. The work presents the development and validation of a simulation model, called MEEDI, and graphical figures for the parametric sensitivity investigation of energy performance in different climates in Chile. The MEEDI is based on the ISO 13790 monthly calculation method of building energy use with two improved procedures for the calculation of the heat transfer through the floor and the solar heat gains. The graphical figures illustrate the effects of climate conditions, envelope components and window size and orientation on the energy consumption. The MEEDI program can contribute to find the best solution to increase energy efficiency in residential buildings. It can be adapted for various parameters, making it useful for future projects. The economic viability of specific measures for building envelope materials was analysed. Payback periods range from 5 to 27 years depending on the location and energy scenario. The study illustrates how building design decisions can have a significant impact on final energy performance. With simple envelope components modification, valuable energy gains and carbon emission reductions can be achieved in a cost-effective manner in Chile.

scholarly journals Design and Energy Performance Analysis of a Hotel Building in a Hot and Dry Climate: A Case Study

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5502
Author(s):  
Sultan Kobeyev ◽  
Serik Tokbolat ◽  
Serdar Durdyev
Keyword(s):  
Performance Analysis ◽  
Energy Efficient ◽  
Energy Use ◽  
Energy Performance ◽  
Solar Panels ◽  
Insulation Layer ◽  
Climate Conditions ◽  
Sustainable Technologies ◽  
Graphical Tool ◽  
The Impact

In times of unprecedented climate change and energy scarcity, the design and delivery of energy-efficient and sustainable buildings are of utmost importance. This study aimed to design a hotel building for hot and dry climate conditions and perform its energy performance analysis using energy simulation tools. The model of the hotel building was constructed by a graphical tool OpenStudio and EnergyPlus following the ASHRAE Standard 90.1. To reduce the energy demand of the hotel, parametric analysis was conducted and building envelope parameters such as the thickness of insulation layer in the exterior wall and the roof, thermal conductivity of insulation layer, rate of infiltration, U-factor of windows, and thermal resistance of air gap in the interior walls (R-value), window-to-wall ratio, and orientation of the building were tested and the impact on the energy use of the building was analyzed. It was found that most of the design assumptions based on the ASHRAE standard were already optimal for the considered locality, however, were still optimized further to reach the highest efficiency level. Apart from this, three sustainable technologies—thermochromic windows, phase change materials, and solar panels—were incorporated into the building and their energy consumption reduction potential was estimated by energy simulations. Cumulatively, these sustainable technologies were able to reduce the total energy use from 2417 GJ to 1593 GJ (i.e., by 824 GJ or 34%). Calculation of payback period and return on investments showed that thermochromic windows and solar panels have relatively short payback periods and high return on investments, whereas PCM was found to be economically nonviable. The findings of this study are deemed to be useful for designing a sustainable and energy-efficient hotel building in a sub-tropical climate. However, the overall design and energy performance analysis algorithm could be used for various buildings with varying climate conditions.

scholarly journals Optimization of Window-to-Wall Ratio for Buildings Located in Different Climates: An IDA-Indoor Climate and Energy Simulation Study

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1974
Author(s):  
Sana Sayadi ◽  
Abolfazl Hayati ◽  
Mazyar Salmanzadeh
Keyword(s):  
Energy Use ◽  
Indoor Climate ◽  
Optimal Range ◽  
Climate Conditions ◽  
Lighting Control ◽  
Building Model ◽  
Lighting Energy ◽  
The Impact ◽  
Optimal Window ◽  
Different Climates

This study investigates different cases to obtain optimal Window-to-Wall ratio (WWR) in seven different climate conditions based on the Köppen–Geiger climate classification. The optimal WWR was decided based on the minimum amount of total energy use (total of cooling, heating, and lighting energy use) of a building model during a complete year. The impact of overhang and automatic blinds were assessed on the optimization of WWR for a building with integrated automatic lighting control. Moreover, three different windows with different U-values and features were employed in order to analyze their effect on the energy use and WWR of the building. IDA-Indoor Climate and Energy (IDA-ICE) was used to carry out the simulations. The software has been validated based on ASHRAE Standard 140. Based on each climate condition, orientation, employed window type, and comfort conditions, an optimal range with a specific combination of window with blind, overhang, or neither was found.

Sign in / Sign up

Export Citation Format

Share Document