scholarly journals Design of Intelligent Feeding Control System Based on S7-1200 PLC

2021 ◽  
Vol 245 ◽  
pp. 01051
Author(s):  
Tian Feng ◽  
Li Guangpeng
Keyword(s):  
Control System ◽  
Circuit Design ◽  
Operation Mode ◽  
Control Program ◽  
Touch Screen ◽  
Plc Control ◽  
Actual Operation ◽  
Machine Interface ◽  
Man Machine Interface ◽  
Feeding Control

In order to satisfy the needs of pig breeding, an intelligent feeding control system based on S7 1200PLC is designed in this paper. The design scheme selects Siemens S7-1200 PLC as the main controller and MCGS TPC7062TI touch screen as the man-machine interface. The article has carried on the electrical design, including I/O address allocation, the main circuit design, the control circuit design and so on, and has written the PLC control program in the debugging mode and the operation mode, finally has designed the man-machine interface to realize the configuration of the system using MCGS. After the actual operation, the system runs stably, safely and reliably, has achieved the expected goal, and has a certain prospect of popularization and application.

Design of Control System for Lithium-Ion Battery Automatic Casing Machine Based on PLC

2013 ◽  
Vol 846-847 ◽  
pp. 121-125
Author(s):  
Qin Xiang Xia ◽  
Kai En Liang ◽  
You Xiang Li ◽  
Xiu Juan Liu
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Lithium Ion Battery ◽  
Automatic Control System ◽  
Lithium Ion ◽  
Control Program ◽  
Machine Interface ◽  
Programming Software ◽  
Man Machine Interface

The structure and the control requirements of lithium-ion battery casing machine and the processes of casing were analyzed, and the automatic control system of cylindrical lithium-ion battery 18650 casing machine was designed based on Mitsubishi PLC. The control program of lithium-ion battery casing machine was designed using GX Developer programming software, and the man-machine interface program of the equipment was designed using GT Designer software, in order to operate and monitor the equipment.

Micro-Anode Guided Electroplating (MAGE) Control System

2006 ◽  
Vol 505-507 ◽  
pp. 115-120
Author(s):  
Dong Liang Lee ◽  
Jui Chang Lin ◽  
P.F. Kao ◽  
S.B. Jiang
Keyword(s):  
Control System ◽  
Surface Morphology ◽  
Measurement System ◽  
System Architecture ◽  
Power Source ◽  
Source Control ◽  
Equipment Development ◽  
Machine Interface ◽  
Man Machine Interface ◽  
Control System Architecture

This article releases the details of the equipment development for the micro-anode guided electroplating MAGE fabrication. The microstepping architecture, electroplating power source, control system architecture, measurement system, man machine interface and the control prodedure will be described. Metallic columns around 100 micrometers in diameter were fabricated up to 2cm long with this equipment to demonstrate its performance. An innovative intermittent MAGE mode is supported by this equipment so that it can produce micro columns of finer surface morphology and better circumferential uniformity than the conventional continuous electroplating.

Design of Single Roller Scutcher Control System Based on PLC

2012 ◽  
Vol 546-547 ◽  
pp. 795-799
Author(s):  
Yin Feng Wu ◽  
Jian Wei Liang ◽  
Ling Liang
Keyword(s):  
Control System ◽  
Control Level ◽  
Control Program ◽  
Programmable Logic ◽  
Design Development ◽  
Test Program ◽  
Speed Test ◽  
Plc Control ◽  
Development Cycle ◽  
Pressure Stability

This paper analyzes the control requirements of scutcher and introduces the control system scheme which is composed of programmable logic controller, touch panel and inverter. And it emphasizes the hardware constitution of S7-200 PLC control system, the pressure detection and display of cotton feeding pipeline, together with the principles of the beater speed test program and the control program of cotton feeding motor.The scutcher control system can feed cotton continuously and equably and ensure the pressure stability of the cotton feeding pipeline. In this way, it can adjust process conveniently, decrease fault rate and cut the design development cycle of new equipments to improve the control level of textile machinery.

Screen Printing Equipment Control System Design Based on PLC

2013 ◽  
Vol 415 ◽  
pp. 180-183
Author(s):  
Yun Long Yuan ◽  
Hong Cheng
Keyword(s):  
Control System ◽  
Screen Printing ◽  
Production Efficiency ◽  
Operation Mode ◽  
High Strength ◽  
Production Test ◽  
Action Execution ◽  
Plc Control ◽  
Stable Performance ◽  
Low Efficiency

For the traditional operation mode of high strength, low efficiency in the process of the plastic ruler screen printing, the powerful PLC is used as the control core, the automatic PLC control system is developed, and the reasonable programming skills are applied so that the two institutions can work in parallel, which greatly improves the production efficiency. At the same time, sophisticated sensors are used to detect each action execution state so as to ensure that work is reliable with stable performance. Through actual production test, the printing speed has reached the capacity of 28 rulers on average per minute, and has achieved the good production benefit.

The development of a graphical man-machine interface for computer-aided control system design

1986 ◽  
Vol 18 (7) ◽  
pp. 395 ◽  
Author(s):  
H.A. Barker ◽  
M. Chen ◽  
P.W. Grant ◽  
C.P. Jobling ◽  
P. Townsend
Keyword(s):  
Control System ◽  
System Design ◽  
Control System Design ◽  
Computer Aided ◽  
Machine Interface ◽  
Man Machine Interface

Integrated Validation of Man Machine Interface and Control System for a Combined Cycles Plant

1992 ◽  
Vol 25 (1) ◽  
pp. 235-238
Author(s):  
E. Colozza ◽  
P. Groppelli ◽  
M. Maini ◽  
A. Scianna
Keyword(s):  
Control System ◽  
Combined Cycles ◽  
Machine Interface ◽  
Man Machine Interface ◽  
And Control

The Study on Liquid Level Control System Based on PLC and WinCC

2013 ◽  
Vol 336-338 ◽  
pp. 1292-1295
Author(s):  
Min Zhao ◽  
Cai Yun Ren ◽  
Dong Liang Lei ◽  
Feng Lian Qi
Keyword(s):  
Control System ◽  
Control Process ◽  
Liquid Level ◽  
Control Technique ◽  
Level Control ◽  
Level Control System ◽  
Plc Control ◽  
Ac Motors ◽  
Machine Interface ◽  
Liquid Level Control

Based on the PLC control technique and WinCC configuration technology,the control system for the liquid level of the tank was designed. After receiving liquid level signal that transferred from radar tester,the PLC process it ,and then output related control signal to the actuator.The actuator is composed of two AC motors,one is for the main pump ,and another for the auxiliary pump.The function of human-machine interface is achieved with the help of Smart700 touch screen of Siemens.Communication functions between the WinCC project and the PLC site and pictures of the control process which enabals real-time monitoring of the entire system are finished by designing configuration.Finally,the validity of the system and the feasibility of the design have been proved by debugging and the use of enterprises.

Control System of PDP Lighting Inspection Machine

2011 ◽  
Vol 130-134 ◽  
pp. 1903-1906
Author(s):  
Rui Liu ◽  
Gui Xi Liu ◽  
Peng Ju Chang ◽  
Wei Hua He ◽  
Zeng Jian Huang
Keyword(s):  
Control System ◽  
Control Program ◽  
Structure Design ◽  
Manufacturing Execution System ◽  
Color Analysis ◽  
Visual Positioning ◽  
Plasma Display ◽  
Machine Interface ◽  
Analysis System ◽  
Inspection Machine

The test of panel’s display effect is a key step in the panel production. Lighting inspection machines test the electrical, optical and surface information of Plasma Display Panels (PDPs). This machine is based on a PLC control system and a color analysis system. The PLC system controls a visual positioning system and links to Manufacturing Execution System (MES) and a panel conveyor. This paper considers the structure design and action workflow of the lighting inspection machine. Multi-layer network is built to connect with the whole production system. Optional operation modes are designed in control program and Man-machine interface is introduced to facilitate the operation.

Sign in / Sign up

Export Citation Format

Share Document