Design of Single Roller Scutcher Control System Based on PLC

2012 ◽  
Vol 546-547 ◽  
pp. 795-799
Author(s):  
Yin Feng Wu ◽  
Jian Wei Liang ◽  
Ling Liang
Keyword(s):  
Control System ◽  
Control Level ◽  
Control Program ◽  
Programmable Logic ◽  
Design Development ◽  
Test Program ◽  
Speed Test ◽  
Plc Control ◽  
Development Cycle ◽  
Pressure Stability

This paper analyzes the control requirements of scutcher and introduces the control system scheme which is composed of programmable logic controller, touch panel and inverter. And it emphasizes the hardware constitution of S7-200 PLC control system, the pressure detection and display of cotton feeding pipeline, together with the principles of the beater speed test program and the control program of cotton feeding motor.The scutcher control system can feed cotton continuously and equably and ensure the pressure stability of the cotton feeding pipeline. In this way, it can adjust process conveniently, decrease fault rate and cut the design development cycle of new equipments to improve the control level of textile machinery.

The Industrial Manipulator Control System Based on Programmable Logic Controller

2013 ◽  
Vol 473 ◽  
pp. 235-238
Author(s):  
Xin Zhang
Keyword(s):  
Control System ◽  
Monitoring System ◽  
Software Design ◽  
Industrial Production ◽  
Control Method ◽  
Control Program ◽  
Programmable Logic ◽  
Industrial Manipulator ◽  
Plc Control ◽  
Manipulator Control

Industrial manipulator has become an important and indispensable part of the modern industrial production, This paper studies the industrial manipulator control system based on programmable controller, This paper mainly introduces the software design of PLC control system, analyzes the various modules of the composition manipulator control system , Adopt Mitsubishi PLC design of manipulator system was put forward, the function and the control method of Mitsubishi PLC was studied; Experimental results show that the manipulator can eventually exercise according to the requirements of the control program ,and implement the monitoring system of this manipulator intuitive image observation, reached the design purpose and the requirements of this paper.

Research on the Automatic Control System of Industrial Kiln of Hot-Dip Galvanizing

2012 ◽  
Vol 241-244 ◽  
pp. 1213-1216
Author(s):  
Xi Min Liu ◽  
Shu Qiang Wang
Keyword(s):  
Control System ◽  
Natural Gas ◽  
General Structure ◽  
Control Program ◽  
Optimal Operation ◽  
Networked Control System ◽  
Human Computer Interface ◽  
Running System ◽  
Plc Control ◽  
Upper Computer

This article takes the natural gas hot-dip galvanizing kiln as the research object, designing a set of networked control system based on PROFIBUS, introducing the combustion system design of the natural gas kiln and the general structure of control system, and developing PLC control program and human-computer interface of the upper computer, and realizing network monitoring. It has been found that the stably running system provides powerful tools for product quality control and optimal operation management.

Improving Design of Cup Conveying Part for Sealing Machine Based on PLC

2014 ◽  
Vol 989-994 ◽  
pp. 2913-2916
Author(s):  
Li Ai Pan ◽  
Qiu Lei Du ◽  
Yan Li Wu
Keyword(s):  
Control System ◽  
Human Error ◽  
Control Program ◽  
Mechanical Transmission ◽  
Plc Control ◽  
Advanced Control ◽  
Transmission Part ◽  
Control Principle ◽  
And Control ◽  
Easy Operation

In order to improve the sealing quality and reduce the labor intensity of people, the stepping motors have been adopted in the salver mechanical transmission part and sealing part of the original sealing machine. In the paper, salver feeding and control system of sealing machine have been designed. The results have been obtained such as control principle diagram of the control system, equivalent circuit diagram and outer wiring diagram of PLC and PLC control program. It can realize the automatic control of the sealing machine. Improved sealing machine has the characteristic of simple mechanical transmission parts, advanced control system, small human error, low fault rate and easy operation.

Design Based on PLC Programming Control De-Dust System

2014 ◽  
Vol 644-650 ◽  
pp. 3643-3646
Author(s):  
Gang Quan Wang
Keyword(s):  
Operating System ◽  
Control System ◽  
Program Design ◽  
Control Program ◽  
Ladder Diagram ◽  
Programmable Controller ◽  
Plc Control ◽  
Plc Control System ◽  
Plc Programming ◽  
Dust System

In this paper, The article applies the principle of the PLC programmable controller control, according to the process requirements of de-dusting program design the ladder diagram system of dust-free workshop control program, using the advantages of PLC control system full, which make the function more powerful and make the design andthe operating system more simple.

scholarly journals Design of Intelligent Feeding Control System Based on S7-1200 PLC

2021 ◽  
Vol 245 ◽  
pp. 01051
Author(s):  
Tian Feng ◽  
Li Guangpeng
Keyword(s):  
Control System ◽  
Circuit Design ◽  
Operation Mode ◽  
Control Program ◽  
Touch Screen ◽  
Plc Control ◽  
Actual Operation ◽  
Machine Interface ◽  
Man Machine Interface ◽  
Feeding Control

In order to satisfy the needs of pig breeding, an intelligent feeding control system based on S7 1200PLC is designed in this paper. The design scheme selects Siemens S7-1200 PLC as the main controller and MCGS TPC7062TI touch screen as the man-machine interface. The article has carried on the electrical design, including I/O address allocation, the main circuit design, the control circuit design and so on, and has written the PLC control program in the debugging mode and the operation mode, finally has designed the man-machine interface to realize the configuration of the system using MCGS. After the actual operation, the system runs stably, safely and reliably, has achieved the expected goal, and has a certain prospect of popularization and application.

scholarly journals Design of a Control System for Magnetic Plate-type Precision Seeding Production Line Based on PLC and MCU

2013 ◽  
Vol 7 (1) ◽  
pp. 82-89
Author(s):  
Yan Xiaoyue ◽  
Hu Jianping ◽  
Ma Jun ◽  
Wang Xun
Keyword(s):  
Control System ◽  
Production Line ◽  
Step Motor ◽  
Sensor Technology ◽  
Programmable Logic ◽  
Automatic Programming ◽  
Plc Control ◽  
Acceleration And Deceleration ◽  
Programming Techniques ◽  
Plate Type

Based on the magnetic seed-metering principle, a new magnetic plate-type precision seeder and seeding production line were developed to meet the requirements of precision seeding. The control system was designed based on Programmable Logic Controller (PLC) and Mico Controller Unit (MCU). Automatic programming techniques, sensor technology, acceleration and deceleration control of step motor were integrated into the system. The PLC control system controls the workflow of the production line to realize accurate positioning of the tray and its coordination. The MCU control system controls the flip of the sowing board, as well as the up-and-down movement of the seed case for whole tray seed-filling and sowing. Seeding tests for the magnetic powder coated rape seeds showed that the rates of single-seeding, over-seeding and miss-seeding were 90.2778%, 4.6875% and 5.0347% respectively. The seeding speed was up to 14s per tray. This result meets the requirements of precision seeding.

The Design of PLC Control System on Laser Drill Welding Machine

2014 ◽  
Vol 894 ◽  
pp. 217-221
Author(s):  
Juan Liu ◽  
Yi Huang Lin ◽  
Yang Zhang
Keyword(s):  
Control System ◽  
Fault Diagnosis ◽  
Laser Welding ◽  
Programmable Logic ◽  
Arc Length ◽  
Alarm Signal ◽  
Segment Number ◽  
Diamond Drill ◽  
Welding Machine ◽  
Plc Control

A multifunctional control system on diamond drill laser welding machine was designed. The system mainly contains Siemens S7-200 programmable logic controller and Wei Lun touch-screen interface. It could weld drills of different matrix diameter (Φ20mm-Φ250mm), different segment arc length and segment number automatically. And the utilization of the beam reached 95%. When the system has break down, it will give out alarm signal and make some initial fault diagnosis to handle this problem.

scholarly journals Simulation Method In Programmable Logic

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
J M Sumilat ◽  
F R Seke ◽  
J Mantiri
Keyword(s):  
Control Program ◽  
Simulation Method ◽  
Programmable Logic ◽  
Learning Method ◽  
Work Practices ◽  
Plc Control ◽  
Engineering Degree ◽  
Accurate Knowledge ◽  
Real Work ◽  
Simulation Learning

Programmable logic controller (PLC) is a microprocessor used to automate industry processes such as controlling a factory's engine. As a candidate in electrical engineering degree must be able to assemble and arrange PLC control program so that later can compete in industrial world. Therefore PLC is one of the compulsory courses that must be pursued. But in learning PLC encountered obstacles that students feel less interested in learning that they need to understand the language of logic, and require them to assemble the series of automation with inadequate equipment, so we think Simulation learning method is a learning method can improve the students' understanding of the situation or problem better. The purpose of this research is to know the effect of simulation learning method on students with high and low creativity level in PLC learning. The method used in this research is an experimental method. Result of this study is simulation learning method can improve learning result of PLC, but not maximal. PLC learning requires real work practices so as to provide accurate knowledge to every student.Based on these conclusions, the suggestion in PLC learning can use a learning method that uses work practices as a learning tool of PLC

Design of the Production Line Control System of Beverage Filling Based on PLC

2014 ◽  
Vol 666 ◽  
pp. 171-174
Author(s):  
Wei Wei Hu ◽  
Jian Chu
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Production Line ◽  
Control Program ◽  
Plc Control

PLC control program is simple and easy to use, reliable and so on. In the field of industrial automatic control has been widely used. Therefore, some characteristics of using PLC to design the beverage filling production line control system, in order to meet the requirements of control system. Through the introduction of automatic control of beverage filling, made us to have a deeper understanding for the beverage filling industry, also have a further understanding of the word for automatic control.

Design and Research on the Control System of Magnetic Plate-Type Seeding Production Line

2013 ◽  
Vol 694-697 ◽  
pp. 2051-2056
Author(s):  
Xiao Yue Yan ◽  
Jian Ping Hu ◽  
Chuan Tong Lu ◽  
Xun Wang
Keyword(s):  
Control System ◽  
System Design ◽  
Production Line ◽  
Programmable Logic Controller ◽  
Programmable Logic ◽  
Magnetic Powder ◽  
Seed Filling ◽  
Plc Control ◽  
Plc Control System ◽  
Plate Type

A new magnetic plate-type precision seeding production line and its control system were designed based on the magnetic seed-metering principle. The control system is consisted of DVP-40ES Programmable Logic Controller and LJD-51-XB+ Mico Controller Unit. The PLC control system controls the working flow of the production line. The MCU control system controls turnover movement of the sowing board and up-and-down movement of the seed case for whole tray seed-filling and sowing. Seeding tests for the magnetic powder coated rape seeds showed that the rate of single-seeding, over-seeding and miss-seeding were 90.2778%, 4.6875% and 5.0347% respectively. The seeding speed was 257 trays per hour, an average of each tray with 14s. It meets the requirements of precision seeding. The system design is reasonable and reliable.

Sign in / Sign up

Export Citation Format

Share Document