scholarly journals Designing Control System of Hypersonic Vehicle with Dynamic Pressure Constraints Considered

Author(s):  
Hongyang Xu ◽  
Yonghua Fan ◽  
Xi Tong ◽  
Jie Yan

An airbreathing hypersonic vehicle(AHV) generally adopts a scramjet engine as its propulsion, which needs strict conditions of flight dynamic pressure. A new dynamic pressure control system is presented, in which the AHV autopilot directly uses dynamic pressure to track the dynamic pressure command. Firstly, the dynamic pressure model of the AHV is established and the state equations of dynamic pressure control are given. Then, the dynamic pressure control system is implemented using the LQR optimal control theory. The dynamic pressure error is augmented in order to add an integral control to track the dynamic pressure with zero steady error. The structure of the dynamic pressure control system is also obtained. The simulation results show that the dynamic pressure control system has a good performance for guaranteeing the dynamic pressure of the scramjet engine with the disturbance of drag and thrust considered.

1984 ◽  
Vol 70 (9) ◽  
pp. 1256-1261
Author(s):  
Toshio INOUE ◽  
Takeya FUKUMOTO ◽  
Shigeharu KAWAI ◽  
Kenta YOSHII ◽  
Tsuyoshi TACHIBANA

2017 ◽  
pp. 62-67
Author(s):  
V. G. Kuznetsov ◽  
O. A. Makarov

At cementing of casing of oil and gas wells during the process of injecting of cement slurry in the casing column the slurry can move with a higher speed than it’s linear injection speed. A break of continuity of fluid flow occurs, what can lead to poor quality isolation of producing formations and shorten the effective life of the well. We need to find some technical solution to stabilize the linear velocity of the cement slurry in the column. This task can be resolved with an automated control system.


Author(s):  
Eric Chalmers ◽  
Edmond Lou ◽  
Doug Hill ◽  
Vicky H. Zhao ◽  
Man-Sang Wong

2014 ◽  
Vol 494-495 ◽  
pp. 1274-1277
Author(s):  
Kan Liu ◽  
Hao You

This article introduces a measurement system based on LabVIEW used for optical interference fringe on micro-fluidic chips. This system mainly uses cameras to capture real-time images of wedge interference fringe on micro-fluidic chips, then the collected images will be binarized by LabVIEW. The processed images will be divided by zone , determine the flatness and gap thickness of the micro-fluidic chips by interference fringes with different directions of deflection and numbers. Finally, feedback from measured data will be used to adjust the flatness and gap thickness of micro-fluidic chips in order to meet the requirement of tests.


2011 ◽  
Vol 230-232 ◽  
pp. 187-191
Author(s):  
Gong Fa Li ◽  
Si Qiang Xu ◽  
Jin Hui Wang ◽  
Jin Tang Yang ◽  
Jian Yi Kong ◽  
...  

The air compressor system is a time-varying, delay and nonlinear complex system, it has a very important sense to ensure that the supply pressure is stable in the compressor control system. According to the working characteristic of air compressor system, the fuzzy control theory, as one of the modern control theories, was applied into the constant pressure control system to design a fuzzy pressure controller. The simulation results show that the controller was more convenient and effective; it has certain directive significance and reference for the other parameter’s control of air compressor system.


2013 ◽  
Vol 706-708 ◽  
pp. 1063-1067
Author(s):  
Hai Feng Lin ◽  
Liu Qing Du ◽  
Li Ping Xiong

The Liquid Surface Pressure Control is the key factor for the guarantee of Low Pressure Die Casting Quality. Regarding to the disadvantages of conventional PID Control such as pressure fluctuation, poor repeatability of the pressure curve, and so on, we propose Liquid Surface Pressure Control System (LSPCS) based on Fuzzy Adaptive PID. Design method of Fuzzy PID Controller has been discussed, and the realization methods of the hardware and software in this system are developed. This proposed system has a good performance in practice.


Sign in / Sign up

Export Citation Format

Share Document