scholarly journals Experimental comparative study of reactive powder concrete: mechanical properties and the effective factors

2018 ◽  
Vol 162 ◽  
pp. 04004 ◽  
Author(s):  
Eyad Kadhem ◽  
Ammar Ali ◽  
Sameh Tobeia
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Modulus Of Elasticity ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Reactive Powder Concrete ◽  
Concrete Mechanical Properties ◽  
Reactive Powder

Reactive Powder Concrete (RPC) is a type of ultra-high performance concrete, this dense composite material generally characterized by high cement content, high durability, low porosity, low water/cement ratio and in most cases contains steel fibers as new types of concrete appears, further investigation for their mechanical properties are needed. This work aims to give a better understanding of RPC behavior by deriving formulas to calculate the modulus of elasticity and the splitting tensile strength in relation with compressive strength and steel fibers content. This study is based on data obtained from the experimental investigation done in this work and from others pervious works. The parametric study is based mainly on the silica fume content which is used in four different ratios (12 %, 15 %, 20 % and 25 %), the use of micro steel fibers 15 mm in length, 0.2 mm in diameter and aspect ratio of 75 added in ratios of (0 %, 1 %, 1.5 % and 2 %), and water/cement in ratios of (16 %, 18 %, 20 % and 22 %), respectively. The proposed equations show a better behavior in comparison to some available equations that were used in the estimation of modulus of elasticity and splitting tensile strength of reactive powder concrete, the coefficient of variation for the proposed equations (COV) decrease to 10.677% and 10.455% respectively.

An Experimental Study on Evaluation of Mechanical Properties in High Performance Concrete Using Admixture

2013 ◽  
Vol 372 ◽  
pp. 231-234
Author(s):  
Jeong Eun Kim ◽  
Wan Shin Park ◽  
Nam Yong Eom ◽  
Sun Woong Kim ◽  
Do Gyeum Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Silica Fume ◽  
Modulus Of Elasticity ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Experimental Investigations ◽  
Binder Ratio

In this study, some experimental investigations on the development of mechanical properties with age of high performance concrete (HPC) incorporated with blast furnace slag with fly ash or silica fume have been reported. Four different blended HPC were prepared in 0.40 water-binder ratio. At every four mixtures, the compressive strength, splitting tensile strength and modulus of elasticity at 7 and 28 days have been observed for HPC developments. Consequently, only replacement of silica fume significantly increases the mechanical properties in terms of compressive strength, splitting tensile strength and modulus of elasticity.

scholarly journals Effect of Steel Fibers and Temperature on the Mechanical Properties of Reactive Powder Concrete

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Mahmoud Ahmed Ali Abdelrahim ◽  
Aboelwafa Elthakeb ◽  
Usama Mohamed ◽  
Mohamed Taha Noaman
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elevated Temperatures ◽  
Fine Sand ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Reactive Powder Concrete ◽  
Strain Relationship ◽  
Reactive Powder

Abstract Reactive Powder Concrete (RPC) is a concrete of the modern generation it mainly contains a high percentage of cement and a small percentage of water For cement as well as the presence of fine sand, ground quartz and silica dust. This research aims Studying the behavior and mechanical characteristics of RPC exposed to elevated temperatures. The key variables in this study are steel fibers content and the high temperatures of different levels 25, 200, 300, 400 ºC. Mechanical properties of concrete behavior including compressive strength, splitting tensile strength, stress-strain relationship (modulus of elasticity), and flexural strength. The test findings indicated that the Output strength of RPC specimens decreased when the high temperature increases. At a temperature of 400 °C, all samples lost the compressive strength and splitting tensile strength.

scholarly journals Effect of different curing conditions on the mechanical properties of reactive powder concrete

2018 ◽  
Vol 162 ◽  
pp. 02014
Author(s):  
Mazin Abdulrahman ◽  
Alyaa Al-Attar ◽  
Marwa Ahmad
Keyword(s):  
Mechanical Properties ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Material Constant ◽  
Hot Water ◽  
Modulus Of Rupture ◽  
Reactive Powder Concrete ◽  
Curing Conditions ◽  
Reactive Powder

Reactive Powder Concrete (RPC) is an ultra-high performance concrete which has superior mechanical and physical properties, and composed of cement and very fine powders such as quartz sand and silica fume with very low water/ binder ratio and Superplasticizer. Heat treatment is a well-known method that can further improve the performance of (RPC). The current research including an experimental study of the effect of different curing conditions on mechanical properties of reactive powder concrete (compressive strength, modulus of rupture and splitting tensile strength), the curing conditions includes three type of curing; immersion in water at temperature of 35 OC (which is considered as the reference-curing situation), immersion in water at temperature of 90 OC for 5 hours daily and curing with hot steam for 5 hours daily) until 28 days according to ASTM C684-99 [8]. This research includes also the study of effect of adding silica fume as percentage of cement weight on mechanical properties of reactive powder concrete for different percentage ratios (5%,10% and 15%). Super plasticizer is also used with ratio of (1.8%) by weight of cementitious material; constant water cement ratio (0.24) was used for all mixes. For each reactive concrete mix, it has been cast into a cubes of (150*150*150) (to conduct the compression test), a cylinders of 150mm diameter with 300mm height (to conduct split test) and prisms of (500*100*100)mm to conduct the modulus of rupture test. The results showed that the best method of curing (according to its enhancing the RPC mechanical properties) is the method of immersion in hot water at temperature 90 OC for the all silica fume percentages, and the best used silica fume percentage was (10%) for the all used curing methods.

The Effect of Mineral Admixtures on Mechanical Properties of High Performance Concrete at very Low Temperature

2014 ◽  
Vol 584-586 ◽  
pp. 1509-1513
Author(s):  
Nan Zhang ◽  
Juan Liao ◽  
Tao Zhang ◽  
Wen Zhan Ji ◽  
Bao Hua Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Low Temperature ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Mineral Admixtures ◽  
The Difference ◽  
Very Low Temperature

The effect of very low temperature on high performance concrete (HPC) mechanical properties is studied by using a reasonable testing method. The results show that the compressive strengths of concrete are increasing with lower temperatures. Fly ash (FA), compared to ground granulated blast-furnace slag (GGBFS), is positive to the compressive strength increasing at low temperature. The splitting tensile strengths of concrete appear a maximum at-40°C~-80°C. The compound replacement by GGBFS and FA makes the splitting tensile strength present the extreme value at higher temperature. At very low temperature, the single or compound replacement by mineral admixtures can result in the difference of the relationship between compressive strength and splitting tensile strength, and the degradation of concrete subjected to cold-thermal shocks.

scholarly journals PENGARUH PENAMBAHAN SERAT BAJA TERHADAP SIFAT MEKANIS REACTIVE POWDER CONCRETE

2020 ◽  
Vol 3 (2) ◽  
pp. 49
Author(s):  
Shandy Trisakti paiding Lewa ◽  
Patria Kusumaningrum
Keyword(s):  
High Performance ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Steel Fibers ◽  
Reactive Powder Concrete ◽  
High Rise ◽  
High Rise Building ◽  
Fine Aggregates ◽  
Reactive Powder ◽  
Column Base

<p><em>As urban growth increase, massive high-rise building construction become a critical solution. In high-rise building, column base may be subjected to very high axial load from the upper stories and may experience very large moment due to the lateral loads. As a result, the column base requires a great deal amount of reinforcement which make it very cramped. In order to prevent honeycomb as the reinforcement gap is narrow yet difficult to provide sufficient vibration during concrete casting, high performance concrete (HPC) may be the solution. One of the HPC innovations is Reactive Powder Concrete (RPC). RPC is a self-compacting type of HPC contains well graded fine and super fine aggregates with cement and pozzolanic material to strengthen the Interfacial Transition Zone (ITZ) between the mortar matrix and fine aggregates. RPC may achieve high compressive strength as the mix uses low water to cement ratio, thus it introduces less void and no coarse aggregates, thus ITZ is stronger. RPC has similar characteristic as concrete, with its brittle behaviour. To avoid the brittle failure of RPC, in this study steel fibers are added into the RPC mixture. This research is conducted to examine the effectiveness of using steel fibers on the mechanical properties of Steel Fiber Reactive Powder Concrete (SFRPC). </em><em>The steel fiber is aimed to increase ductility of tensile strain hardening condition by its multiple crack-bridging behavior.</em></p>

scholarly journals Influence of Percentage Replacement of Metakaolin on Different Concrete Types Exposed to Internal Sulphate Attack

2018 ◽  
Vol 7 (4.20) ◽  
pp. 514
Author(s):  
Hadeel K. Awad ◽  
Rawaa K. Aboud ◽  
Shatha D. Mohammed
Keyword(s):  
Tensile Strength ◽  
Flexural Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Fine Aggregate ◽  
Sulphate Attack ◽  
Concrete Properties ◽  
Reactive Powder ◽  
Positive Effect

This research presents an experimental investigation on the influence of metakaolin replacement percentage upon some properties of       different concrete types. Three types of concrete were adopted (self- compacted concrete, high performance concrete and reactive powder concrete) all of high sulphate (SO3) percentage from the fine aggregate weight, 0.75%.Three percentages of metakaolin replacement were selected to be studied (5, 7 and 10) %. Three types of concrete properties (compressive, flexural and splitting tensile strength) were adopted to achieve better understanding for the influence of adding metakaolin.. The output results indicated that the percentage of metakaolin had a different level of positive effect on the compressive strength for both including and excluding of internal sulphate attack. This effect reached at 28 days of curing to (11.86, 10.22 and 4.75) % in case of excluding sulphate attack and to (13.82, 11.47and 6.53) % in the other case for SCC, HPC and RPC respectively. It can be concluded that the effect of metakaolin in both SCC and HPC are more influence than in RPC. Splitting and flexural strength have showed a similar behavior, flexural strength increased by (15.38, 9.42 and 5,84) % at age of 28 days when the sulphate attack is excluded, while it was (14.02, 10.66 and 4.28)% in case of sulphate attack included for SCC,HPC and RPC respectively. The response of splitting tensile strength for both including and excluding of sulphate attack reached to (13.03, 12.95 and 9.17) % and (16.88, 10.33 and 6.74) % respectively for SCC, HPC and RPC.   

Effect of PVA Fiber on Mechanical Properties of High-Performance Concrete

2013 ◽  
Vol 438-439 ◽  
pp. 249-252 ◽  
Author(s):  
Zhe Jin ◽  
Cheng Ya Wang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
High Performance ◽  
High Performance Concrete ◽  
Volume Fraction ◽  
Splitting Tensile Strength ◽  
Fiber Volume ◽  
Pva Fiber

An experimental study has been conducted to investigate the effect of the fraction of PVA fiber on the mechanical properties of high-performance concrete. The mechanical properties include compressive strength, splitting tensile strength and compressive elastic modulus. On the basis of the experimental results of the specimens of six sets of mix proportions, the mechanism of PVA fiber acting on these mechanical properties has been analyzed in details. The results indicate that there is a tendency of increase in the compressive strength and splitting tensile strength when the fiber volume fraction is below 0.08%, and the compressive elastic modulus of high-performance concrete decreases gradually with the increasing volume fraction of PVA fiber with appropriate content.

scholarly journals Economical Reactive Powder Concrete Cast Using Available Materials in North Sinai, Egypt

2013 ◽  
Vol 59 (2) ◽  
pp. 175-195 ◽  
Author(s):  
Nageh N. Meleka ◽  
Alaa A. Bashandy ◽  
Mohamed A. Arab
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Silica Fume ◽  
Modulus Of Elasticity ◽  
Steel Fibers ◽  
Indirect Tensile Strength ◽  
Reactive Powder Concrete ◽  
Indirect Tensile ◽  
Reactive Powder ◽  
North Sinai

Abstract In this research reactive powder concrete (RPC) was prepared using sand from North Sinai. The mechanical properties of locally cast RPC were investigated and evaluated by studying the effects of using different cement and silica fume contents and new steel fibers’ aspect ratios as reinforcement for RPC. Specimens’ preparation, curing regimes and testing procedures to evaluate the compressive strength, the modulus of elasticity, the indirect tensile strength and the flexural strength were discussed. A compressive strength of 154.5MPa, indirect tensile strength of 11.98MPa, modulus of elasticity of 45.1GPa and flexural strength of 30.26MPa have been achieved for reinforced RPC contains 800 kg/m3 cement content and silica fume content 30% of cement weight. The test results showed some improvements by increasing cement and silica fume contentsas well as adding steel fibers on the compressive strength, modulus of elasticity and indirect tensile strength.

Properties of HPC with Fly Ash, Blast Furnace Slag and Silica Fume

2013 ◽  
Vol 372 ◽  
pp. 239-242
Author(s):  
Sun Woong Kim ◽  
Wan Shin Park ◽  
Jeong Eun Kim ◽  
Nam Yong Eom ◽  
Do Gyeum Kim ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Blast Furnace ◽  
Fly Ash ◽  
Silica Fume ◽  
Modulus Of Elasticity ◽  
Blast Furnace Slag ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Furnace Slag

This paper addresses the results of an extensive experimental study on the compressive, splitting tensile strength modulus of elasticity in long-term. These tests were carried out to investigate the mechanical properties of HPC for 56 and 91days. In this work, High performance concrete was designed a water-binder ratio of 0.40. In addition, three different concrete mixes were used in these specimens. The results properties of HPC with fly Ash, blast furnace slag and silica fume were effective for compressive strength splitting tensile strength and modulus of elasticity improvement between 56 to 91 curing days.

scholarly journals Mechanical Properties and Anti-Spalling Behavior of Ultra-High Performance Concrete with Recycled and Industrial Steel Fibers

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 783 ◽  
Author(s):  
Juan Yang ◽  
Gai-Fei Peng ◽  
Guo-Shuang Shui ◽  
Gui Zhang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fracture Energy ◽  
High Performance ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Steel Fibers ◽  
Ultra High Performance Concrete ◽  
Explosive Spalling ◽  
Recycled Steel

Experimental investigations on the mechanical properties of ultra-high performance concrete (UHPC) incorporating two types of recycled steel fiber processed from waste tires and three types of industrial steel fiber were carried out for comparison. Mechanical properties of UHPC include compressive strength, splitting tensile strength, fracture energy, and elastic modulus. Their explosive spalling behaviors under high temperatures were also investigated. The results show that all types of steel fiber exhibit a beneficial effect on the mechanical properties and the anti-spalling behavior of UHPC, except that recycled steel fiber with rubber attached (RSFR) has a slightly negative effect on the compressive strength of UHPC. Compared to industrial steel fibers, recycled steel fibers have a more significant influence on improving the splitting tensile strength and fracture energy of UHPC, and the improvement of RSFR was much higher than that of recycled steel fiber without rubber (RSF). UHPC that incorporates industrial hooked-end steel fiber (35 mm in length and 0.55 mm in diameter) exhibits the best resistance to explosive spalling, and the second is the RSF reinforced UHPC. The positive relationship between the fracture energy and the anti-spalling behavior of steel fiber reinforced UHPC can be presented. These results suggest that recycled steel fiber can be a toughening material and substitute for industrial steel fibers to be used in ultra-high performance concrete, especially RSFR.

Sign in / Sign up

Export Citation Format

Share Document