scholarly journals Giant change in infrared light transmission in La0.67Ca0.33MnO3 film near the Curie temperature

2002 ◽  
Vol 91 (7) ◽  
pp. 4403-4408 ◽  
Author(s):  
Yu. P. Sukhorukov ◽  
E. A. Gan'shina ◽  
B. I. Belevtsev ◽  
N. N. Loshkareva ◽  
A. N. Vinogradov ◽  
...  
Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4844
Author(s):  
Meir Nitzan ◽  
Itamar Nitzan ◽  
Yoel Arieli

Adequate oxygen delivery to a tissue depends on sufficient oxygen content in arterial blood and blood flow to the tissue. Oximetry is a technique for the assessment of blood oxygenation by measurements of light transmission through the blood, which is based on the different absorption spectra of oxygenated and deoxygenated hemoglobin. Oxygen saturation in arterial blood provides information on the adequacy of respiration and is routinely measured in clinical settings, utilizing pulse oximetry. Oxygen saturation, in venous blood (SvO2) and in the entire blood in a tissue (StO2), is related to the blood supply to the tissue, and several oximetric techniques have been developed for their assessment. SvO2 can be measured non-invasively in the fingers, making use of modified pulse oximetry, and in the retina, using the modified Beer–Lambert Law. StO2 is measured in peripheral muscle and cerebral tissue by means of various modes of near infrared spectroscopy (NIRS), utilizing the relative transparency of infrared light in muscle and cerebral tissue. The primary problem of oximetry is the discrimination between absorption by hemoglobin and scattering by tissue elements in the attenuation measurement, and the various techniques developed for isolating the absorption effect are presented in the current review, with their limitations.


1998 ◽  
Vol 6 (A) ◽  
pp. A35-A44 ◽  
Author(s):  
R.A. Taylor

A new fiber optic sensor was developed to measure the mass of optically thin cotton samples by integrating light transmission and reflectance signals. High speed measurements of cotton strength requires an accurate determination of the specimen mass without use of laborious cut-and-weigh methods. A previous high speed sensor measured changes in visible light transmission which required secondary measurements of fiber fineness to adjust the data for light scattering. Fiber orientation also affected scattering which required a precise control on specimen preparation. The new sensor measures fiber specimen transflectance using near infrared light. Because cellulose (the basic compound in cotton) exhibits strong absorption bands, its concentration can be accurately measured using near infrared absorbance. In this report we show that an integratinq sensor gave the best measurement of cotton fiber mass. Additionally, we demonstrated its accuracy over a wide range of fiber orientations using a novel fiber specimen tension experiment.


TAPPI Journal ◽  
2021 ◽  
Vol 20 (4) ◽  
pp. 265-274
Author(s):  
HOSSEIN ABEDSOLTAN

This study proposes an experimental method for the in-plane liquid wicking to determine the absorption capacity of retail paper towels. Individual plies of the paper towels were tested to minimize the transverse wicking effects on surface wetting. The method involves arbitrary point source injection of liquid into the paper towel surface while recording microscopic images of the wetted areas as liquid spreads. The samples were selected from two main manufacturing processes: conventional wet pressing and through air drying. The tested liquids were water and decane with various driving forces. Two distinct imaging systems, infrared light absorption imaging and visible light transmission imaging, monitored and recorded the wetting process. The wetted regions were calculated to generate the wetting graphs, which illustrate both the dynamic and static wetting behaviors.It was found the amount of driving force has a negligible effect on the maximum wetted area formed on the surface.So, the maximum wetted area and the paper grammage were applied to determine the absorption capacity of the tested towels. Moreover, the absorption capacity results were validated by the basket-immersion test method (ISO 12625-8).Therefore, the proposed method in this work enables quantification of the absorption capacity of papertowels.


Symmetry ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 431 ◽  
Author(s):  
Tuyen Pham ◽  
Dat Nguyen ◽  
Jin Kang ◽  
Kang Park

The fitness classification of a banknote is important as it assesses the quality of banknotes in automated banknote sorting facilities, such as counting or automated teller machines. The popular approaches are primarily based on image processing, with banknote images acquired by various sensors. However, most of these methods assume that the currency type, denomination, and exposed direction of the banknote are known. In other words, not only is a pre-classification of the type of input banknote required, but in some cases, the type of currency is required to be manually selected. To address this problem, we propose a multinational banknote fitness-classification method that simultaneously determines the fitness level of a banknote from multiple countries. This is achieved without the pre-classification of input direction and denomination of the banknote, using visible-light reflection and infrared-light transmission images of banknotes, and a convolutional neural network. The experimental results on the combined banknote image database consisting of the Indian rupee and Korean won with three fitness levels, and the United States dollar with two fitness levels, show that the proposed method achieves better accuracy than other fitness classification methods.


PLoS ONE ◽  
2012 ◽  
Vol 7 (10) ◽  
pp. e47460 ◽  
Author(s):  
Jared R. Jagdeo ◽  
Lauren E. Adams ◽  
Neil I. Brody ◽  
Daniel M. Siegel

2010 ◽  
Vol 2010 ◽  
pp. 1-9 ◽  
Author(s):  
M. Gantri ◽  
H. Trabelsi ◽  
E. Sediki ◽  
R. Ben Salah

We present a numerical spectroscopic study of visible and infrared laser radiation in a biological tissue. We derive a solution of a general two-dimensional time dependent radiative transfer equation in a tissue-like medium. The used model is suitable for many situations especially when the external source is time-dependent or continuous. We use a control volume-discrete ordinate method associated with an implicit three-level second-order time differencing scheme. We consider a very thin rectangular biological-tissue-like medium submitted to a visible or a near infrared light sources. The RTE is solved for a set of different wavelength source. All sources are assumed to be monochromatic and collimated. The energetic fluence rate is computed at a set of detector points on the boundaries. According to the source type, we investigate either the steady-state or transient response of the medium. The used model is validated in the case of a heterogeneous tissue-like medium using referencing experimental results from the literature. Also, the developed model is used to study changes on transmitted light in a rat-liver tissue-like medium. Optical properties depend on the source wavelength and they are taken from the literature. In particular, light-transmission in the medium is studied for continuous wave and for short pulse.


2012 ◽  
Vol 84 ◽  
pp. 51-56 ◽  
Author(s):  
Immanuel Schäfer

Fenestraria aurantiaca (also known as window plant) is a succulent with specialized adaptations to deal with heat, light and aridity. Fenestraria aurantiaca (F. a.) grows with most of its body under the sand. Just the top, with a light transparent surface – the window – on it, protrudes from the surface hence giving explanation to the plants name. Experiments with light, and detailed microscopy studies show the physical, biological and chemical capabilities of F. a. It was found that the window works as a lens, light from a 90 ° angle is directed into the plant. Thereby the window filters the light. Up to 90 % of the visible light is blocked; with rising wavelength the window gets more transparent until the near infrared light (1000 nm) where the transparency declines rapidly. But the parenchyma is up 90 % transparent. Based on those results the principles of the plant were defined, which are used for abstractions. Generally F.a. has four principles: light handling, surface cleaning, heat avoidance and water storing. Improvements founded on the inspiration of the window plant seem to be possible in photovoltaic systems, which have problems with overheating and also light concentration. An example solution called “buried solar cells” is presented. Another working field is the screen of mobile devices, where the clarity and readability suffers from direct sunlight. With the help from the methods displayed by F.a., there is an energy saving solution explained.


Sign in / Sign up

Export Citation Format

Share Document