scholarly journals Structural and electrical properties of large area epitaxial VO2films grown by electron beam evaporation

2017 ◽  
Vol 121 (5) ◽  
pp. 055303 ◽  
Author(s):  
V. Théry ◽  
A. Boulle ◽  
A. Crunteanu ◽  
J. C. Orlianges ◽  
A. Beaumont ◽  
...  
1983 ◽  
Vol 25 ◽  
Author(s):  
Robert M. Fletcher ◽  
D. Ken Wagner ◽  
Joseph M. Ballantyne

ABSTRACTEpitaxial GaAs layers have been grown on Ge-coated Si substrates. Deposition of epitaxial Ge was performed by electron beam evaporation onto a <100> Si substrate. GaAs was then deposited by organometallic vapor-phase epitaxy. Films grown over large areas (∼1 cm2) and by selective epitaxy in stripe patterns (∼50 μm wide) have been evaluated by a number of techniques to determine structural and electrical properties. In addition, we report what we believe to be the first LEDs fabricated in GaAs/Ge/Si heterostructures.


2021 ◽  
Vol 2 ◽  
pp. 59-65
Author(s):  
I. Yu. Bakeev ◽  
◽  
Yu. A. Burachevsky ◽  
E. S. Dvilis ◽  
D. B. Zolotukhin ◽  
...  

The work is devoted to the study of electrical properties (temperature dependences of conductivity, relative dielectric constant, dielectric loss tangent for various frequencies) of an aluminum oxide ceramic film deposited on a metal substrate. The film was created by the original method of electron beam evaporation of a non-conductive target, consisting of a compressed alumina powder, using a plasma electron source, which is able to reliably operate in the fore-vacuum pressure range (5 – 100 Pa). Such increased working gas pressures ensures the generation of a dense beam plasma near the target, which neutralizes the charging of a non-conducting target and thereby provides its effective melting and electron beam evaporation.


1995 ◽  
Vol 10 (1) ◽  
pp. 26-33 ◽  
Author(s):  
L.M. Porter ◽  
R.F. Davis ◽  
J.S. Bow ◽  
M.J. Kim ◽  
R.W. Carpenter

Thin films (4–1000 Å) of Co were deposited onto n-type 6H-SiC(0001) wafers by UHV electron beam evaporation. The chemistry, microstructure, and electrical properties were determined using x-ray photoelectron spectroscopy, high resolution transmission electron microscopy, and I-V and C-V measurements, respectively. The as-deposited contacts exhibited excellent rectifying behavior with low ideality factors and leakage currents of n < 1.06 and 2.0 × 10−8 A/cm2 at −10 V, respectively. During annealing at 1000 °C for 2 min, significant reaction occurred resulting in the formation of CoSi and graphite. These annealed contacts exhibited ohmic-like character, which is believed to be due to defects created in the interface region.


2015 ◽  
Vol 15 (9) ◽  
pp. 964-969 ◽  
Author(s):  
Hui Kyung Park ◽  
Jaeseung Jo ◽  
Hee Kyeung Hong ◽  
Gwang Yeom Song ◽  
Jaeyeong Heo

Vacuum ◽  
2007 ◽  
Vol 81 (9) ◽  
pp. 1023-1028 ◽  
Author(s):  
Jianke Yao ◽  
Jianda Shao ◽  
Hongbo He ◽  
Zhengxiu Fan

Sign in / Sign up

Export Citation Format

Share Document