Development of empirical relationships to predict porosity and hardness of WC-10Co coatings on 35CrMo steel using DOE approach

2021 ◽  
Author(s):  
Daniel C. Ribu ◽  
R. Rajesh ◽  
D. Thirumalaikumarasamy ◽  
S. Vignesh ◽  
R. Paventhan
Keyword(s):  
Empirical Relationships ◽  
35Crmo Steel

Simulation Model of the Dynamic Behavior of a Tire Running Over an Obstacle

1988 ◽  
Vol 16 (2) ◽  
pp. 62-77 ◽  
Author(s):  
P. Bandel ◽  
C. Monguzzi
Keyword(s):  
Simulation Model ◽  
Dynamic Behavior ◽  
Black Box ◽  
Box Model ◽  
Vehicle Suspension ◽  
Empirical Relationships ◽  
Static Tests ◽  
High Speeds ◽  
Dynamic Forces ◽  
Vehicle Suspension System

Abstract A “black box” model is described for simulating the dynamic forces transmitted to the vehicle hub by a tire running over an obstacle at high speeds. The tire is reduced to a damped one-degree-of-freedom oscillating system. The five parameters required can be obtained from a test at a given speed. The model input is composed of a series of empirical relationships between the obstacle dimensions and the displacement of the oscillating system. These relationships can be derived from a small number of static tests or by means of static models of the tire itself. The model can constitute the first part of a broader model for description of the tire and vehicle suspension system, as well as indicating the influence of tire parameters on dynamic behavior at low and medium frequencies (0–150 Hz).

Regression analysis of indicators of a numerical experiment to determine the cooling time of oil

2020 ◽  
pp. 89-97
Author(s):  
A. U. Yakupov ◽  
D. A. Cherentsov ◽  
K. S. Voronin ◽  
Yu. D. Zemenkov
Keyword(s):  
Regression Analysis ◽  
Computer Experiment ◽  
Calculation Model ◽  
Cooling Time ◽  
Regression Coefficients ◽  
Fisher Criterion ◽  
Empirical Relationships ◽  
Factors Affecting ◽  
Oil Pipeline ◽  
Significant Regression

The article performed the processing of the results of a computer experiment to determine the cooling time of oil in a stopped oil pipeline. We proposed a calculation model in previous works that allows you to simulate the process of cooling oil.There was a need to verify the previously obtained results when conducting a laboratory experiment on a stand with soil. To conduct the experiment, it was necessary to conduct the planning of the experiment. The factors affecting the cooling time of oil in the oil pipeline, which will vary in the proposed experiment, are determined, empirical relationships are established. A regression analysis was carried out, and the dispersion homogeneity was checked using the Cochren criterion. The estimates of reproducibility variances are calculated. The adequacy hypothesis was tested using the Fisher criterion. Significant regression coefficients are established.

Understanding gas bubble trauma in an era of hydropower expansion: how do fish compensate at depth?

2020 ◽  
Vol 77 (3) ◽  
pp. 556-563 ◽  
Author(s):  
Naomi K. Pleizier ◽  
Charlotte Nelson ◽  
Steven J. Cooke ◽  
Colin J. Brauner
Keyword(s):  
Bubble Growth ◽  
Gas Bubble ◽  
Hydroelectric Dams ◽  
Dissolved Gas ◽  
Empirical Relationships ◽  
Lethal Effects ◽  
Exposed Fish ◽  
Total Dissolved Gas ◽  
Rainbow Trout Oncorhynchus Mykiss ◽  
The Relationship

Hydrostatic pressure is known to protect fish from damage by total dissolved gas (TDG) supersaturation, but empirical relationships are lacking. In this study we demonstrate the relationship between depth, TDG, and gas bubble trauma (GBT). Hydroelectric dams generate TDG supersaturation that causes bubble growth in the tissues of aquatic animals, resulting in sublethal and lethal effects. We exposed fish to 100%, 115%, 120%, and 130% TDG at 16 and 63 cm of depth and recorded time to 50% loss of equilibrium and sublethal symptoms. Our linear model of the log-transformed time to 50% LOE (R2 = 0.94) was improved by including depth. Based on our model, a depth of 47 cm compensated for the effects of 4.1% (±1.3% SE) TDG supersaturation. Our experiment reveals that once the surface threshold for GBT from TDG supersaturation is known, depth protects rainbow trout (Oncorhynchus mykiss) from GBT by 9.7% TDG supersaturation per metre depth. Our results can be used to estimate the impacts of TDG on fish downstream of dams and to develop improved guidelines for TDG.

scholarly journals On the Tidal Prism: The Roles of Basin Extension, Bottom Friction and Inlet Cross-Section

2021 ◽  
Vol 9 (1) ◽  
pp. 88
Author(s):  
Marco Petti ◽  
Sara Pascolo ◽  
Silvia Bosa ◽  
Nadia Busetto
Keyword(s):  
Cross Section ◽  
Bottom Friction ◽  
Static Method ◽  
Tidal Prism ◽  
Empirical Relationships ◽  
Cross Sectional ◽  
Asymptotic Regime ◽  
Static Regime ◽  
The One ◽  
Basin Area

The prism of the Lignano tidal inlet was approximately constant over the last forty years, although the section width has halved. This has led to questions concerning the factors that most influence the tidal prism, and on the applicability of the well-known A–P relationship. A conceptual scheme of the sea–channel–lagoon system has been used to perform a sensitivity analysis of different parameters that characterize both the basin and the inlet cross-section. A 2D hydrodynamic model has been applied to evaluate the prism and compare it to the one derived by a static method, which is the basis of the analytical derivation of the A–P linkage. Three regimes have been found in the prism variability as a function of the basin extension: a linear static regime between prism and basin area; an asymptotic regime in which the prism depends only on the basin bottom friction; and an intermediate one. In addition, the roles of the inlet and channel sizes on the prism value have been investigated. The results, compared to the empirical relationships between the prism and the inlet cross-section, show that a variation in the cross-sectional area does not always corresponds to a change in tidal prism.

Experiences with alluvial foundations for earth dams in the Prairie provinces

1979 ◽  
Vol 16 (2) ◽  
pp. 255-271 ◽  
Author(s):  
N. Peters ◽  
K. N. Lamb
Keyword(s):  
Rational Design ◽  
Preliminary Design ◽  
Empirical Relationships ◽  
Design Concepts ◽  
Theoretical Design ◽  
Pore Pressures ◽  
Wide Range ◽  
Thick Layers ◽  
Limited Testing ◽  
Prairie Provinces

The foundations for numerous dams in proglacial and interglacial valleys in the Prairie provinces consist of soft alluvial soils. The deposits are up to 60 m deep, and contain thick layers of clay interspersed with lenses and layers of silt, sand, and gravel.This paper describes the damsite investigation and laboratory testing required, the design methods and construction procedures used, and the foundation performance observed during and after construction. A number of empirical relationships between index tests and physical properties of the soils, which provide useful guidelines for preliminary design, are presented.The design approach has gradually evolved from an empirical design with limited testing to a more rational design based on detailed investigations and thorough instrumentation. Increased reliance is placed on observational apparatus to monitor movements and pore pressures to confirm design assumptions as construction proceeds. The theoretical design is always checked with former designs of dams that have performed satisfactorily.Safe economical dams have been constructed in spite of large deformations and high pore pressures. Two case histories illustrate the wide range in dam design for alluvial foundations. The first shows an older design cross section with modifications required to ensure a stable dam, and the second describes a recently constructed dam that incorporates many of the latest design concepts.

Microstructure, corrosion and tribological properties of Ti(CN) multilayer coatings on 35CrMo steel by CVD

Rare Metals ◽  
2014 ◽  
Vol 39 (11) ◽  
pp. 1314-1320
Author(s):  
Jin Zhang ◽  
Qi Xue ◽  
Song-Xia Li ◽  
Zeng Qin
Keyword(s):  
Tribological Properties ◽  
Multilayer Coatings ◽  
35Crmo Steel
Sign in / Sign up

Export Citation Format

Share Document