The effect of silage plant species, concentrate proportion and sugar beet pulp supplementation on the performance of growing and finishing crossbred bulls

2014 ◽  
Vol 54 (10) ◽  
pp. 1703 ◽  
Author(s):  
M. Pesonen ◽  
E. Joki-Tokola ◽  
A. Huuskonen
Keyword(s):  
Sugar Beet ◽  
Plant Species ◽  
Red Clover ◽  
Phleum Pratense ◽  
Sugar Beet Pulp ◽  
Carcass Weight ◽  
Timothy Grass ◽  
Beet Pulp ◽  
Fat Score ◽  
Dietary Treatments

A 2 × 2 × 2 factorial design was used to study the effects on animal performance of (1) the silage plant species, (2) the proportion of concentrate, and (3) the inclusion of molassed sugar beet pulp (SBP) in a barley-based concentrate. A feeding experiment was conducted using 32 crossbred bulls (Aberdeen Angus × Nordic Red dams sired by Hereford bulls) and lasting 359 days. The experimental silages were harvested from either pure timothy grass (Phleum pratense) or mixed timothy grass and red clover (Trifolium pratense) stands. The bulls were offered silage ad libitum. The two concentrate proportions were 330 and 660 g/kg diet DM. The concentrate used was either rolled barley or a mixture of rolled barley (700 g/kg DM) and SBP (300 g/kg DM). Concentrate proportion and silage plant species had no effect on total intake of the bulls (7.66 kg DM/day, on average) but SBP supplementation increased intake by 5% (P < 0.05). The dietary treatments had no effect on liveweight gain (1120 g/day) or carcass gain (705 g/day) of the bulls. The average carcass weight of the bulls was 405 kg. SBP supplementation increased carcass weight by 3% (P < 0.05) but it was not influenced by concentrate proportion or silage plant species. The dietary treatments had no effect (P > 0.05) on the dressing proportion or carcass conformation of the bulls. The carcass fat score was 13% higher in the bulls fed with pure grass silage compared with bulls fed the grass–red clover silage (P < 0.05), while the concentrate proportion and SBP supplementation had no effect on fat score.

scholarly journals Effect of l-carnitine supplementation and sugar beet pulp inclusion in gilt gestation diets on gilt live weight, lactation feed intake, and offspring growth from birth to slaughter1

2019 ◽  
Vol 97 (10) ◽  
pp. 4208-4218 ◽  
Author(s):  
Hazel B Rooney ◽  
Keelin O’Driscoll ◽  
John V O’Doherty ◽  
Peadar G Lawlor
Keyword(s):  
Blood Glucose ◽  
Birth Weight ◽  
Sugar Beet ◽  
Feed Intake ◽  
Post Partum ◽  
Live Weight ◽  
Sugar Beet Pulp ◽  
Carcass Weight ◽  
Beet Pulp ◽  
Blood Glucose Concentrations

Abstract This study evaluated the effects of l-carnitine (CAR) and sugar beet pulp (SBP) inclusion in gilt gestation diets on gilt live weight, cortisol concentration, lactation feed intake, and lifetime growth of progeny. Eighty-four pregnant gilts (Large White × Landrace) were randomly assigned to a treatment at day 38 of gestation until parturition; Control (0% SBP, 0 g CAR), CAR (0.125 g/d CAR), SBP (40% SBP), and SBP plus CAR (40% SBP, 0.125 g/d CAR). Gilts were weighed and back-fat depth was recorded on day 38, day 90, and day 108 of gestation and at weaning. Gilt saliva samples were collected pre-farrowing and fecal consistency was scored from entry to the farrowing room until day 5 post-partum. The number of piglets born (total, live, and stillborn) and individual birth weight was recorded. Piglet blood glucose concentration was measured 24 h post-partum and pigs were weighed on day 1, day 6, day 14, day 26, day 76, day 110, and day 147 of life. Carcass data were collected at slaughter. There was no interaction between CAR and SBP for any variable measured. The SBP-fed gilts were heavier on day 90 and day 108 of gestation (P < 0.05) and lost more weight during lactation (P < 0.05) than control gilts. They also had a greater fecal consistency score (P < 0.01). Total farrowing duration, piglet birth interval, and lactation feed intakes were similar between treatments (P > 0.05). The number of piglets born (total, live, and stillborn) and piglet birth weight was likewise similar between treatments (P > 0.05). Piglets from CAR-fed gilts had lower blood glucose concentrations (P < 0.01), while piglets from SBP-fed gilts had greater blood glucose concentrations (P < 0.01). Piglets from CAR gilts had a lower average daily gain between day 1 and day 6 (P < 0.05) and day 14 and day 26 post-partum (P < 0.05) compared to piglets from control gilts. However, CAR gilts weaned a greater number of pigs (P = 0.07). Live weight and carcass weight at slaughter were heavier for pigs from CAR gilts (P < 0.05) and from SBP gilts (P < 0.05). Pigs from CAR gilts (P < 0.01) and SBP gilts (P < 0.05) had increased carcass muscle depth. In conclusion, no benefit was found from the combined feeding of CAR and SBP. Fed separately, CAR increased the live weight, carcass weight, and muscle depth of progeny at slaughter. Feeding a high SBP diet increased fecal consistency in gilts pre-farrowing and increased live weight and carcass muscle depth of progeny.

248 Impact of Adding a Stimbiotic or Sugar Beet Pulp to Nursery Pig Diets on Growth Performance and Individual Injections

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 93-94
Author(s):  
Laura A Merriman ◽  
Pete Wilcock ◽  
Gustavo Cordero ◽  
Ben Haberl
Keyword(s):  
Sugar Beet ◽  
Sugar Beet Pulp ◽  
Contingency Analysis ◽  
Rotavirus A ◽  
Soluble Fibre ◽  
Feeding Program ◽  
Beet Pulp ◽  
Nursery Pig ◽  
Pig Performance ◽  
Dietary Treatments

Abstract Utilizing different dietary fiber sources has been studied in piglets to help mitigate post-weaning diarrhea and improve post-weaning performance. An experiment was conducted to investigate the effect of adding sugar beet pulp or a stimbiotic (Signis; AB Vista) on nursery pig performance. Barrows (n = 216; average initial BW = 5.1kg) were randomly allotted to one of three dietary treatments and fed a 4 phase feeding program; 1) Control (Con), Insoluble/Soluble fibre ratio (I/S), P1; 4.47, P2; 5.84, P3; 5.82, P4; 7.08. 2) High Soluble (HS) with sugar beet pulp added at 5% (P1 and P2) and 2.5% (P3 and P4) giving the following I/S ratio; P1; 2.63, P2; 2.91, P3; 5.02 and P4; 5.42. 3) Control plus stimbiotic added at 100 g/t (SIG). Pen weight and feed disappearance were recorded weekly to calculate ADG, ADFI, and G:F. Fecal score was visually ranked by pen daily from wean to 35 days. Blanket water medications were not provided. Instead, individual pigs that needed treatment were identified and injected with individual antibiotic interventions, and the number of interventions per pig was recorded. Performance data were submitted to ANOVA using JMP with mean separation by Tukey test and a contingency analysis was used to compare antibiotic injections. At day 14, pigs had a Rotavirus A and B challenge. Addition of HS or SIG reduced (P &lt; 0.05) individual antibiotic treatments by 56 and 32% compared to the CON, respectively. No differences were observed in scour scores or overall ADG. Overall intake was greater (P &lt; 0.01) in HS (0.560 kg) than CON (0.491 kg) or SIG (0.492 kg). Pigs fed SIG (0.671) had a better (P = 0.011) G:F over SBP (0.602), with CON (0.649) being intermediate. In conclusion, HS increased intake where stimbiotic improved feed efficiency, and both decreased antibiotic treatments.

Obtaining of sorbing material based on sugar beet pulp

2019 ◽  
pp. 10-16
Author(s):  
S.V. Meshcheryakov ◽  
◽  
I.S. Eremin ◽  
D.O. Sidorenko ◽  
M.S. Kotelev ◽  
...  
Keyword(s):  
Sugar Beet ◽  
Sugar Beet Pulp ◽  
Beet Pulp

Kinetic and thermodynamic study of the adsorption of calcium onto sugar beet pulp

2016 ◽  
pp. 565-570
Author(s):  
Huang Qin ◽  
Zhu Si-ming ◽  
Zeng Di ◽  
Yu Shu-juan
Keyword(s):  
Sugar Beet ◽  
Adsorption Equilibrium ◽  
Ph Value ◽  
Hard Water ◽  
Sugar Beet Pulp ◽  
Order Kinetic ◽  
Factors Affecting ◽  
Isotherm Equation ◽  
Equilibrium Data ◽  
Beet Pulp

Sugar beet pulp (SBP) was used as low value adsorbent for the removal of calcium from hard water. Batch experiments were conducted to determine the factors affecting adsorption of the process such as pH value and Ca concentration. The adsorption equilibrium of Ca2+ by the SBP is reached after 100min and a pseudo second-order kinetic model can describe the adsorption process. The initial concentrations of Ca varied from 927 to 1127mgCa2+/L. A dose of 30g/L sugar beet pulp was sufficient for the optimum removal of calcium. The overall uptake of Ca ions by sugar beet pulp has its maximum at pH=8. The adsorption equilibrium data fitted well with the Langmuir adsorption isotherm equation.

Possibilities of joint treatment of spent sugar beet pulp and waste water from a sugar factory

2012 ◽  
pp. 756-761 ◽  
Author(s):  
Miroslav Hutnan ◽  
Štefan Tóth ◽  
Igor Bodík ◽  
Nina Kolesárová ◽  
Michal Lazor ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Sugar Beet ◽  
Pilot Plant ◽  
Biogas Production ◽  
Sugar Beet Pulp ◽  
Spare Capacity ◽  
Anaerobic Reactor ◽  
Sugar Factory ◽  
Beet Pulp ◽  
Joint Treatment

The possibility of joint treatment of spent sugar beet pulp and wastewater from a sugar factory was studied in this work. Works focused on processing of spent sugar beet pulp separately or together with other substrates can be found in the literature. In the case of some sugar factories, which have spare capacity in the anaerobic reactor on an anaerobic-aerobic wastewater treatment plant, joint processing of spent sugar beet pulp and wastewater from the sugar factory might be an interesting option. The results of the operation of a pilot plant of an anaerobic reactor with a capacity of 3.5 m3 are discussed. Operation of the pilot plant confirmed the possibility of cofermentation of these materials. The organic loading rate achieved in the anaerobic reactor was higher than 6 kg/(m3·d) (COD), while more than half of the load was provided by spent sugar beet pulp. The addition of sugar beet pulp decreased the concentration of ammonia nitrogen in the anaerobic reactor and it was even necessary to add nitrogen. However, the nitrogen content in sludge water depends on the C:N ratio in the processed sugar beet pulp, therefore this knowledge cannot be generalized. About 1.5 to 2-fold biogas production can be expected from the cofermentation of wastewater with sugar beet pulp in an anaerobic reactor, compared with the biogas production from just wastewater treatment.

Pomelo peel and sugar beet pulp as novel biosorbents in purification of biodiesel

Biofuels ◽  
2021 ◽  
pp. 1-8
Author(s):  
Saida Ibragić ◽  
Narcisa Smječanin ◽  
Ranko Milušić ◽  
Mirza Nuhanović
Keyword(s):  
Sugar Beet ◽  
Sugar Beet Pulp ◽  
Pomelo Peel ◽  
Beet Pulp

scholarly journals The Influence of Extruded Sugar Beet Pulp on Cookies' Nutritional, Physical and Sensory Characteristics

2021 ◽  
Vol 13 (9) ◽  
pp. 5317
Author(s):  
Sonja Simić ◽  
Jovana Petrović ◽  
Dušan Rakić ◽  
Biljana Pajin ◽  
Ivana Lončarević ◽  
...  
Keyword(s):  
Particle Size ◽  
Sugar Beet ◽  
Dietary Fiber ◽  
Wheat Flour ◽  
Nutritional Quality ◽  
Sugar Beet Pulp ◽  
Sensory Characteristics ◽  
Total Dietary Fiber ◽  
Beet Pulp

Sugar beet pulp (SBP) is a by-product of the sugar industry in which the dietary fiber content ranges from 73% to 80%. Compared to cereal fibers mainly used in biscuit production, sugar beet fibers are gluten free and have a perfect ratio of 2/3 insoluble fiber. In this work, sugar beet pulp was extruded with corn grits (ratios of corn grits to sugar beet pulp in extrudates were 85:15, 70:30, and 55:45), and the obtained sugar beet pulp extrudates (SBPEs) were used for improving the nutritional quality of cookies. The wheat flour in cookies was replaced with SBPEs in the amount of 5, 10, and 15%. The influence of three factors (the percentage of sugar beet pulp in the SBPEs, the size of the SBPE particles, and the percentage of wheat flour substituted with SBPEs) and their interactions on the nutritional quality of cookies, as well as their physical and sensory characteristics are examined using the Box–Behnken experimental design. The addition of extruded sugar beet pulp (SBPEs) significantly increased the amount of total dietary fiber and mineral matter of cookies. On the whole, the addition of SBPEs increased cookie hardness, but the hardness decreased with an increase in extrudate particle size. Sensory characteristics (except for the taste) were the most influenced by extrudate particle size.

Sign in / Sign up

Export Citation Format

Share Document