Control of Growth and Flowering in Two Western Australian Species of Pimelea

1992 ◽  
Vol 40 (3) ◽  
pp. 377 ◽  
Author(s):  
RW King ◽  
IA Dawson ◽  
SS Speer
Keyword(s):  
Plant Height ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Photosynthetic Photon Flux ◽  
Average Temperature ◽  
Australian Species ◽  
Floral Primordia ◽  
Western Australian ◽  
Cool Conditions

Pimelea ferruginea and P. rosea both show an obligate requirement for exposure to mean temperatures below 15°C for more than 5 weeks for induction of flowering. Subsequently, floral primordia develop slowly in these cool conditions or rapidly if the average temperature is raised to 21°C. Plants held at 21°C or warmer remained vegetative for over 1 year. P. rosea was found to be daylength neutral, whereas flowering of P. ferruginea was enhanced, slightly, by a short day photoperiod of 10 h. Plant height was greater for both species in long days. Benzylaminopurine (BA) was effective for increasing branching. Gibberellin A3 (GA3) and paclobutrazol were effective in controlling plant height in P. ferruginea. Flower life was not altered by application of silver thiosulfate and BA, and was greatest when plants were grown in high photosynthetic photon flux density and at lower temperatures (15/ 10°C v. 24/19°C).

scholarly journals Estimation of Global and Diffuse Photosynthetic Photon Flux Density under Various Sky Conditions Using Ground-Based Whole-Sky Images

2019 ◽  
Vol 11 (8) ◽  
pp. 932
Author(s):  
Megumi Yamashita ◽  
Mitsunori Yoshimura
Keyword(s):  
Flux Density ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Diffuse Component ◽  
Photosynthetic Photon Flux ◽  
Physiological Processes ◽  
Sky Conditions ◽  
Mean Square Errors ◽  
Relative Root

A knowledge of photosynthetic photon flux density (PPFD: μmol m−2 s−1) is crucial for understanding plant physiological processes in photosynthesis. The diffuse component of the global PPFD on a short timescale is required for the accurate modeling of photosynthesis. However, because the PPFD is difficult to determine, it is generally estimated from incident solar radiation (SR: W m−2), which is routinely observed worldwide. To estimate the PPFD from the SR, photosynthetically active radiation (PAR: W m−2) is separated from the SR using the PAR fraction (PF; PAR/SR: unitless), and the PAR is then converted into the PPFD using the quanta-to-energy ratio (Q/E: μmol J−1). In this procedure, PF and Q/E are considered constant values; however, it was reported recently that PF and Q/E vary under different sky conditions. Moreover, the diffuse ratio (DR) is needed to distinguish the diffuse component in the global PAR, and it is known that the DR varies depending on sky conditions. Ground-based whole-sky images can be used for sky-condition monitoring, instead of human-eye interpretation. This study developed a methodology for estimating the global and diffuse PPFD using whole-sky images. Sky-condition factors were derived through whole-sky image processing, and the effects of these factors on the PF, the Q/E of global and diffuse PAR, and the DR were examined. We estimated the global and diffuse PPFD with instantaneous values using the sky-condition factors under various sky conditions, based on which the detailed effects of the sky-condition factors on PF, Q/E, and DR were clarified. The results of the PPFD estimations had small bias errors of approximately +0.3% and +3.8% and relative root mean square errors of approximately 27% and 20% for the global and diffuse PPFD, respectively.

scholarly journals Different LED Light Wavelengths and Photosynthetic Photon Flux Density Effect on Colletotrichum acutatum Growth

Plants ◽  
2022 ◽  
Vol 11 (1) ◽  
pp. 143
Author(s):  
Neringa Rasiukevičiūtė ◽  
Aušra Brazaitytė ◽  
Viktorija Vaštakaitė-Kairienė ◽  
Alma Valiuškaitė
Keyword(s):  
Flux Density ◽  
Photosynthetic Photon Flux Density ◽  
Growth Characteristics ◽  
Colletotrichum Acutatum ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Photosynthetic Photon Flux ◽  
Light Emitting ◽  
Led Light ◽  
Fungus Growth

The study aimed to evaluate the effect of different photon flux density (PFD) and light-emitting diodes (LED) wavelengths on strawberry Colletotrichum acutatum growth characteristics. The C. acutatum growth characteristics under the blue 450 nm (B), green 530 nm (G), red 660 nm (R), far-red 735 nm (FR), and white 5700 K (W) LEDs at PFD 50, 100 and 200 μmol m−2 s−1 were evaluated. The effect on C. acutatum mycelial growth evaluated by daily measuring until five days after inoculation (DAI). The presence of conidia and size (width and length) evaluated after 5 DAI. The results showed that the highest inhibition of fungus growth was achieved after 1 DAI under B and G at 50 μmol m−2 s−1 PFD. Additionally, after 1–4 DAI under B at 200 μmol m−2 s−1 PFD. The lowest conidia width was under FR at 50 μmol m−2 s−1 PFD and length under FR at 100 μmol m−2 s−1 PFD. Various LED light wavelengths influenced differences in C. acutatum colonies color. In conclusion, different photosynthetic photon flux densities and wavelengths influence C. acutatum growth characteristics. The changes in C. acutatum morphological and phenotypical characteristics could be related to its ability to spread and infect plant tissues. This study’s findings could potentially help to manage C. acutatum by LEDs in controlled environment conditions.

The value of red light at night for increasing basil yield

2018 ◽  
Vol 98 (6) ◽  
pp. 1321-1330
Author(s):  
Jaimin S. Patel ◽  
Leora Radetsky ◽  
Mark S. Rea
Keyword(s):  
Plant Height ◽  
Red Light ◽  
Leaf Size ◽  
Cost Effective ◽  
Dry Weight ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light At Night ◽  
Sweet Basil

Sweet basil (Ocimum basilicum L.) is primarily used for culinary purposes, but it is also used in the fragrance and medicinal industries. In the last few years, global sweet basil production has been significantly impacted by downy mildew caused by Peronospora belbahrii Thines. Nighttime exposure to red light has been shown to inhibit sporulation of P. belbahrii. The objective of this study was to determine if nighttime exposure to red light from light-emitting diodes (λmax = 625 nm) could increase plant growth (plant height and leaf size) and yield (number and weight of leaves) in basil plants. In two sets of greenhouse experiments, red light was applied at a photosynthetic photon flux density of 60 μmol m−2 s−1 during the otherwise dark night for 10 h (from 2000 to 0600). The results demonstrate that exposure to red light at night can increase the number of basil leaves per plant, plant height, leaf size (length and width), and leaf fresh and dry weight compared with plants in darkness at night. The addition of incremental red light at night has the potential to be cost-effective for fresh organic basil production in controlled environments.

scholarly journals Use of an Aspen Overstory to Control Understory Herbaceous Species, Bluejoint Grass (Calamagrostis canadensis), and Fireweed (Epilobium angustifolium)

2004 ◽  
Vol 21 (2) ◽  
pp. 74-79 ◽  
Author(s):  
Chris Maundrell ◽  
Chris Hawkins
Keyword(s):  
Populus Tremuloides ◽  
Picea Glauca ◽  
Ground Cover ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Photosynthetic Photon Flux ◽  
Calamagrostis Canadensis ◽  
Canopy Opening ◽  
Epilobium Angustifolium

Abstract To enhance white spruce [Picea glauca (Moench) Voss] regeneration and growth, the potential for using an aspen (Populus tremuloides Michx.) overstory to suppress bluejoint grass [Calamagrostis canadensis (Michx.)] and fireweed (Epilobium angustifolium L) was investigated. Response to canopy opening was assessed on 10 treatments where the canopy had been incrementally opened. At the summer solstice, measurements of attenuated light were taken at 1.3 meters (breast height). Bluejoint grass and fireweed both responded with greater ground cover as the photosynthetic photon flux density increased (R2 = 0.84, P = 0.0002; R2 = 0.90, P = 0.0001; respectively). Where aspen has developed an overstory canopy, it may be possible to control competing vegetation to create favorable environmental conditions for spruce re-establishment, growth, and release while encouraging a sustainable mixedwood stand.

Photomorphogenesis of wheat sprouts with LED irradiation of different intensities

2019 ◽  
Vol 52 (5) ◽  
pp. 583-594
Author(s):  
T Han ◽  
T Astafurova ◽  
S Turanov ◽  
A Burenina ◽  
A Butenkova ◽  
...  
Keyword(s):  
Flux Density ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Optimum Level ◽  
Photosynthetic Photon Flux ◽  
Plant Cultivation ◽  
Key Factor ◽  
Definition Of ◽  
Led Irradiation

Definition of the growth and development characteristics of plants in varied light conditions is a key factor for the creation of highly efficient light facilities for plant cultivation. Experimental research was conducted using an LED irradiation facility with photosynthetic photon flux densities ranging from 0 to 261 μmol m−2 s−1 and a continuous spectrum with maxima at 445 and 600 nm. Under the maximum photosynthetic photon flux density (261 μmol m− 2 s−1) wheat germs demonstrated diminishing leaf surface with high values of specific leaf area, enhanced pubescence of ground tissues, increases in the number of stomata on the upper epidermis and palisade, and an increase in the thickness of the leaves as well as an increase in carotenoids but a decrease in the chlorophyll a+b/carotenoids relation. It was revealed that the optimum level of photosynthetic photon flux density for the referred spectrum was in the range from 82 to 100 µmol m−2 s−1, which may enable a reduction of irradiance under specific conditions during early development with no harm to the plants while minimizing energy consumption during cultivation.

Sign in / Sign up

Export Citation Format

Share Document