Quantitative analysis of performance, carcass and meat quality traits in cattle from two Australian beef herds in which a null myostatin allele is segregating

2009 ◽  
Vol 49 (4) ◽  
pp. 297 ◽  
Author(s):  
B. A. O' Rourke ◽  
J. A. Dennis ◽  
P. J. Healy ◽  
W. A. McKiernan ◽  
P. L. Greenwood ◽  
...  

Two Australian beef cattle herds, in which selection for muscularity was a primary objective, were used in this study to identify bovine myostatin (MSTN) mutations associated with increased muscling, and to assess associations between genotype and performance, carcass and meat quality traits. One was a research herd (herd A) established from Angus × Hereford cows, and comprised a high and low muscle selection line. The other (herd B) was a commercial beef enterprise with cattle of Angus and Charolais origin. Sequencing of the MSTN coding region and flanking splice junctions in an initial sample of 34 animals from both herds identified the 821 del11 mutation as well as six other polymorphic sites. The nucleotide 374–50C > T polymorphism in intron 1 was found to be in linkage disequilibrium with the 821 del11 mutation, with both variants confined to the high muscle selection line in herd A. No other variants were exclusive to either of the two herd A selection lines. The effect of the 821 del11 mutation was further investigated in a total of 803 cattle from both herds. A relatively high prevalence of 821 del11 heterozygotes (herd A 16%; herd B 23%) was found and heterozygotes had significant advantages in eye muscle area and muscle score over their wildtype counterparts, and did not differ in meat quality. Retail beef yield from steers was higher for the 821 del11 heterozygotes from herd A (67.0 v. 63.5%) and herd B (71.8 v. 68.6%), relative to homozygous wildtype contemporaries, demonstrating the benefits of incorporating single null MSTN alleles into breeding programs.

Animals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 923 ◽  
Author(s):  
Mengyan Wang ◽  
Ping Jiang ◽  
Xiang Yu ◽  
Jiaqi Mi ◽  
Zitong Bai ◽  
...  

In this study, we precisely constructed and transfected the overexpression and interference vectors in BFFs to evaluate the role of DLK1 gene on lipid metabolism in vitro. The expression of of DLK1 in the mRNA and protein level tended to reduce, and TGs were significantly increased in the pGPU6-shDLK1 group compared to the control group (p < 0.05). The expression of DLK1 in the mRNA and protein level were increased in the pBI-CMV3-DLK1 group compared to the control group, and the TGs content showed a significant decrease in the pBI-CMV3-DLK1 group (p < 0.05). Meanwhile, we used the restriction fragment length polymorphism (RFLP-PCR) detection method to screen SNPs further to explore and analyze the relationship between the gene and the economic traits of 28-month-old Chinese Simmental and the fatty acids composition of cattle longissimus muscle. The result showed that two SNPs, IVS3 + 478 C > T and IVS3 + 609 T > G, were identified as being significantly associated with carcass and meat quality traits in Chinese Simmental, such as the carcass fat coverage rate, loin eye muscle area, and fat color score. In summary, our results indicated that DLK1 can affect lipid metabolism in bovine and these two SNPs might be applied as genetic markers of meat quality traits for beef cattle breeding.


2009 ◽  
Vol 49 (6) ◽  
pp. 383 ◽  
Author(s):  
M. L. Wolcott ◽  
D. J. Johnston ◽  
S. A. Barwick ◽  
C. L. Iker ◽  
J. M. Thompson ◽  
...  

Meat quality and carcass traits were measured for 2180 feedlot finished Brahman (BRAH) and Tropical Composite (TCOMP) steers to investigate genetic and non-genetic influences on shear force, and other meat quality traits. Genetic and phenotypic correlations were estimated between carcass and meat quality traits, and with live animal measurements collected in steers from weaning to feedlot exit, and their heifer half-sibs up to their first mating, which were managed in Australia’s tropical or subtropical environments. Left sides of carcasses were tenderstretched (hung by the aitch-bone) while right sides were conventionally hung (by the Achilles tendon). Tenderstretching reduced mean shear force by 1.04 kg, and phenotypic variance by 77% of that observed in conventionally hung sides. Genotype differences existed for carcass traits, with TCOMP carcasses significantly heavier, fatter, with greater eye muscle area, and lower retail beef yield than BRAH. TCOMP had lower shear force, and higher percent intramuscular fat. Meat quality and carcass traits were moderately heritable, with estimates for shear force and compression of 0.33 and 0.19 for BRAH and 0.32 and 0.20 for TCOMP respectively. In both genotypes, estimates of heritability for carcass traits (carcass weight, P8 and rib fat depths, eye muscle area and retail beef yield) were consistently moderate to high (0.21 to 0.56). Shear force and compression were genetically correlated with percent intramuscular fat (r g = –0.26 and –0.57, respectively), and meat colour (r g = –0.41 and –0.68, respectively). For TCOMP, lower shear force was genetically related to decreased carcass P8 fat depth (r g = 0.51). For BRAH steers and heifers measured at pasture, fatness traits and growth rates were genetically correlated with shear force, although the magnitude of these relationships varied with time of measurement. Net feed intake was significantly genetically correlated with carcass rib fat depth (r g = 0.49), eye muscle area (r g = –0.42) and retail beef yield (r g = –0.61). These results demonstrate that selection to improve production and carcass traits can impact meat quality traits in tropically adapted cattle, and that genotype specific evaluations will be necessary to accommodate different genetic relationships between meat quality, carcass and live animal traits.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Simone Savoia ◽  
Andrea Albera ◽  
Alberto Brugiapaglia ◽  
Liliana Di Stasio ◽  
Alessio Cecchinato ◽  
...  

Abstract Background The possibility of assessing meat quality traits over the meat chain is strongly limited, especially in the context of selective breeding which requires a large number of phenotypes. The main objective of this study was to investigate the suitability of portable infrared spectrometers for phenotyping beef cattle aiming to genetically improving the quality of their meat. Meat quality traits (pH, color, water holding capacity, tenderness) were appraised on rib eye muscle samples of 1,327 Piemontese young bulls using traditional (i.e., reference/gold standard) laboratory analyses; the same traits were also predicted from spectra acquired at the abattoir on the intact muscle surface of the same animals 1 d after slaughtering. Genetic parameters were estimated for both laboratory measures of meat quality traits and their spectra-based predictions. Results The prediction performances of the calibration equations, assessed through external validation, were satisfactory for color traits (R2 from 0.52 to 0.80), low for pH and purge losses (R2 around 0.30), and very poor for cooking losses and tenderness (R2 below 0.20). Except for lightness and purge losses, the heritability estimates of most of the predicted traits were lower than those of the measured traits while the genetic correlations between measured and predicted traits were high (average value 0.81). Conclusions Results showed that NIRS predictions of color traits, pH, and purge losses could be used as indicator traits for the indirect genetic selection of the reference quality phenotypes. Results for cooking losses were less effective, while the NIR predictions of tenderness were affected by a relatively high uncertainty of estimate. Overall, genetic selection of some meat quality traits, whose direct phenotyping is difficult, can benefit of the application of infrared spectrometers technology.


2020 ◽  
Vol 60 (5) ◽  
pp. 725
Author(s):  
R. J. Anaruma ◽  
L. G. Reis ◽  
P. E. de Felício ◽  
S. B. Pflanzer ◽  
S. Rossi ◽  
...  

Castration in beef cattle production has been proposed to reduce sexual and aggressive behaviour, increase carcass fat deposition, and improve meat quality traits, such as tenderness and juiciness. The aim of the present study was to evaluate the effects of the age of castration on performance, subprimal yield and meat quality of Nellore cattle raised on a pasture system. A total of 24 Nellore males were raised in a grass-fed system with Brachiaria brizantha since birth until slaughter (at 30 months old). Three treatments were assigned: castration at weaning (CW); castration at 20 months old (C20); and intact bulls (NoC). Males were weighed, and muscle and fat thickness were periodically evaluated by ultrasonography. The cold carcass weight, dressing and carcass pH (pH 24), and subprimal cut weights were recorded after 24 h of chilling. Samples of Longissimus lumborum (LL) were taken to measure meat quality traits. Animals that were castrated at weaning had lower bodyweight after 10 months of age with no changes in the supplement intakes, average daily gain, hot carcass weight and cold carcass weight compared with NoC. Intact males had greater cooking losses and carcass yield compared with others, with no differences for LL pH 24 according to the treatments. The castration did not change the LL muscle area, but decreased total forequarter, chunk, shoulder and eye of round weights, and increased the back fat over LL and rump fat. Animals castrated at weaning had higher marbling compared with others. In addition, regardless of age, castration improved tenderness, increased LL total lipids and decreased moisture compared with NoC. For sensory property, steers castrated at 20 months of age had lower juiciness, and NoC had a greater global sensory property compared with steers castrated at 20 months old. In conclusion, steers castrated at weaning had lower growth rate, final bodyweight and meat production compared with intact males. However, when castration was performed at 20 months, animals did not differ in most cases from castration at weaning and NoC. Tenderness was improved by castration, but sensory traits did not differ between groups.


2020 ◽  
Vol 33 (8) ◽  
pp. 1224-1232
Author(s):  
Jia Luo ◽  
Yiting Yang ◽  
Kun Liao ◽  
Bin Liu ◽  
Ying Chen ◽  
...  

Objective: The QingYu pig is well known for its excellent meat quality attributes in Sichuan province, China. In order to improve its production efficiency, the determination of genetic factors contributing to quantifiable economic traits of livestock is important. Moreover, the cross-breeding of QingYu pigs with western breeds possessing strong growth attributes is an efficient way to improve the performance of this breed.Methods: Here, the genetic parameters of several important reproductive traits of QingYu pigs were estimated, include total number born (TNB), number born alive, litter birth weight, individual birth weight, number of piglets weaned, litter weaning weight, and individual weaning weight. The data was analyzed using the ASReml 3.0 software (NSW Inc., Sydney, Australia). Furthermore, the effects of crossing Berkshire with QingYu (BQ) pigs on carcass and meat quality traits, as well as the effects of slaughter weight on carcass and meat quality of BQ were characterized.Results: QingYu pigs exhibited superior reproductive traits. The TNB available to QingYu pigs was more than 8 per parity. The observed repeatability of the reproductive traits of the QingYu pigs was between 0.10 and 0.23. The significantly correlated genetic and phenotypic of reproduction traits were consistent. Interestingly, the BQ pigs exhibited improved carcass quality, with a significant increase in loin muscle area, lean percentage and reduction in sebum percentage. As a result, BQ had higher L<sub>45min</sub>, lower cooking scores, and lower drip loss. In addition, the loin muscle area, body length, and sebum percentage were significantly higher in 90 and 100 kg animals. Cooking loss showed a significant increase at 80 kg, and marbling increased significantly from 90 kg.Conclusion: The results of this study suggest that QingYu pigs exhibit excellent reproductive properties and heritability of these traits. Crossing with Berkshire is an efficient strategy to improve the carcass and meat quality of QingYu pigs for commercial operations. Furthermore, it appears as though the optimal slaughter weight of BQ pigs is at approximately 90 kg.


2010 ◽  
Vol 23 (11) ◽  
pp. 1405-1411 ◽  
Author(s):  
Jiao Li ◽  
Lu-Pei Zhang ◽  
Qian-Fu Gan ◽  
Jun-Ya Li ◽  
Hui-Jiang Gao ◽  
...  

2013 ◽  
Vol 45 (21) ◽  
pp. 1012-1020 ◽  
Author(s):  
P. C. Tizioto ◽  
J. E. Decker ◽  
J. F. Taylor ◽  
R. D. Schnabel ◽  
M. A. Mudadu ◽  
...  

Meat quality traits are economically important because they affect consumers' acceptance, which, in turn, influences the demand for beef. However, selection to improve meat quality is limited by the small numbers of animals on which meat tenderness can be evaluated due to the cost of performing shear force analysis and the resultant damage to the carcass. Genome wide-association studies for Warner-Bratzler shear force measured at different times of meat aging, backfat thickness, ribeye muscle area, scanning parameters [lightness, redness (a*), and yellowness] to ascertain color characteristics of meat and fat, water-holding capacity, cooking loss (CL), and muscle pH were conducted using genotype data from the Illumina BovineHD BeadChip array to identify quantitative trait loci (QTL) in all phenotyped Nelore cattle. Phenotype count for these animals ranged from 430 to 536 across traits. Meat quality traits in Nelore are controlled by numerous QTL of small effect, except for a small number of large-effect QTL identified for a*fat, CL, and pH. Genomic regions harboring these QTL and the pathways in which the genes from these regions act appear to differ from those identified in taurine cattle for meat quality traits. These results will guide future QTL mapping studies and the development of models for the prediction of genetic merit to implement genomic selection for meat quality in Nelore cattle.


2003 ◽  
Vol 54 (2) ◽  
pp. 149 ◽  
Author(s):  
A. Reverter ◽  
D. J. Johnston ◽  
D. M. Ferguson ◽  
D. Perry ◽  
M. E. Goddard ◽  
...  

Beef cattle data from temperate (TEMP, n = 3947) and tropically (TROP, n = 4137) adapted breeds were analysed to compute estimates of genetic and phenotypic correlations between animal, abattoir carcass, and meat quality measures. Live animal traits included: liveweight (S2LWT), scanned subcutaneous rump fat depth (S2P8), scanned eye muscle area (S2EMA), flight time (S1FT), and finishing average daily gain (FADG). Carcass traits included: hot carcass weight (CWT), retail beef yield percentage (RBY), intramuscular fat percentage (IMF), subcutaneous rump fat depth (P8), eye muscle length by width (ELW), and meat colour score (MEATC). Meat quality measures taken on 2 muscles [M. longissimus thoracis et lumborum (LTL) and M. semitendinosus (ST)] included: shear force of LTL (LTL_SF) and ST (ST_SF); compression of the ST (ST_C); cooking loss % of the LTL (LTL_CL%) and ST (ST_CL%); Minolta LTL L* (LTL_L*), a* (LTL_a*), ST a* (ST_a*); and consumer-assessed LTL tenderness score (LTL_TEND). Genetic and phenotypic correlations between animal measures and related carcass traits were moderate to very high for TEMP and TROP. Genetic correlations between S2LWT and CWT were 0.89 and 0.82, between S2P8 and P8 0.80 and 0.88, and between S2EMA and ELW 0.62 and 0.68, for TEMP and TROP, respectively. Genetic correlations between animal measures and other carcass traits varied; moderate genetic correlations were estimated between S2P8 and RBY (–0.57, –0.19 for TEMP, TROP) and S2P8 and IMF (0.39, 0.23 for TEMP, TROP). Genetic correlations between animal and meat quality measures were moderate to low. For TEMP, moderate genetic correlations were estimated between S2P8 and LTL_TEND (0.38), FADG and ST_a* (–0.49), and FADG and LTL_TEND (0.45); and for TROP, S1FT and LTL_SF (–0.54), and S2EMA and LTL_L* (–0.46). Phenotypic correlations between animal and meat quality were generally low and close to zero. Several moderate to high genetic correlations existed between carcass and meat quality traits. In general, fatness measures were genetically correlated with tenderness (e.g. IMF and LTL_TEND 0.61, 0.31 for TEMP, TROP). CWT was genetically correlated with meat colour (CWT and LTL_L* 0.66, 0.60 for TEMP, TROP) and objective tenderness measures (CWT and ST_C –0.52, –0.22 for TEMP, TROP). Once again phenotypic correlations between carcass and meat quality were low, indicating that few phenotypic predictors of meat quality traits were identified. Several of the genetic correlations show that both animal and abattoir carcass traits may be of use as indirect measures for carcass and meat quality traits in multiple trait genetic evaluation systems.


Sign in / Sign up

Export Citation Format

Share Document