125 IN VITRO-PRODUCED BOVINE EMBRYOS VITRIFIED IN GLASS CAPILLARIES USING TCM-199 OR DULBECCO'S PHOSPHATE-BUFFERED SALINE AS VITRIFICATION-WARMING MEDIA

2007 ◽  
Vol 19 (1) ◽  
pp. 180 ◽  
Author(s):  
N. Mucci ◽  
G. G. Kaiser ◽  
G. Rios ◽  
R. H. Alberio ◽  
L. B. Ferré ◽  
...  
Keyword(s):  
Survival Rate ◽  
Control Group ◽  
Internal Diameter ◽  
Hatching Rate ◽  
External Diameter ◽  
Low Oxygen ◽  
Embryo Survival ◽  
Glass Capillaries ◽  
Phosphate Buffered Saline

In previous studies (unpublished data) we observed that the replacement of open pulled straws (OPS) with glass capillaries (GC) did not affect the embryo survival rate after vitrification–warming. The aim of this work was to evaluate the post-Cryopreservation survival rate of in vitro-produced bovine blastocysts (B) and expanded blastocysts (eB) using Dulbecco's phosphate-buffered saline (PBS) or TCM-199 (TCM; Sigma-Aldrich, St Louis, MO, USA) as holding medium during vitrification and warming in glass capillaries. Cumulus–oocyte complexes were in vitro-matured and fertilized as previously described (Mucci et al. 2006 Theriogenology 65, 1551–1562), and cultured in 4 well plates in groups of 50 in 400-�L drops in serum-free CR1aa under low oxygen condition. Grade B1, B2, and eB were selected at Day 7 post-insemination and allocated to 3 groups: vitrification in TCM, vitrification in PBS, and control (without vitrification). Vitrification and warming were performed according to Vajta et al. (1998, Mol. Reprod. Dev. 51, 53–58), replacing OPS with GC (Tecnon Argentina S.A., Buenos Aires, Argentina); 75 mM length, 1.4 mM internal diameter, 1.6 mM external diameter). Briefly, B and eB were incubated in 1.78 M ethylene glycol (EG) and 1.3 M dimethyl sulfoxide (DMSO) in TCM or PBS supplemented with 20% estrous cow serum (ECS) for 3 min. Embryos were then transferred for 25 s to TCM or PBS supplemented with 3.56 M EG, 2.6 M DMSO, 0.5 M sucrose, and 20% ECS (vitrification solution: VS). Loading of embryos (2 per capillary) was performed by touching a 1-�L drop of VS with the capillary. After this, each capillary was immediately submerged into and stored in liquid nitrogen. Warming was performed by placing the capillary tip directly into TCM or PBS supplemented with 0.25 M sucrose for 5 min. Embryos were then transferred to TCM or PBS containing 0.15 M sucrose and 20% ECS for 1 min. After warming, embryos were cultured for 72 h in CR1aa + 5% ECS to evaluate embryo survival (hatching rate). Data was analyzed using the CATMOD procedure (SAS Institute, Inc., Cary, NC, USA). No interaction was found between holding media and embryo stage. Vitrified-warmed embryos had a significantly lower hatching rate compared with the control group (P < 0.05), whereas no differences were found between TCM and PBS. Expanded blastocysts had a higher hatching rate than blastocysts (P < 0.05). In conclusion, TCM can be replaced with PBS for its use in vitrification procedures. This protocol modification allows a simplified use of this technique in field conditions.

47 A New Device and Method for Successful Vitrification of In Vitro-Produced Ovine Embryos

2018 ◽  
Vol 30 (1) ◽  
pp. 163
Author(s):  
S. Ledda ◽  
J. M. Kelly ◽  
S. K. Walker ◽  
Y. Natan ◽  
A. Arav
Keyword(s):  
Survival Rate ◽  
Embryo Transfer ◽  
Blastocyst Stage ◽  
Embryo Cryopreservation ◽  
Control Group ◽  
Hatching Rate ◽  
High Survival ◽  
Embryo Survival ◽  
New Device

To advance the use of embryo vitrification technology in veterinary practice, we developed a system in which embryo vitrification, warming, and dilution can be performed within a straw. An in-straw embryo cryopreservation method reduces the need for equipment and technical skills and can facilitate direct embryo transfer to the uterus. This study proposes the use of a new device named “Sarah” that is designed to permit all in-straw embryo cryopreservation procedures. Ovine in vitro-produced (IVP) embryos were vitrified at either early blastocyst stage (EB, n = 65, 6 days post-IVF) or fully expanded blastocyst stage (FB, n = 168, 7 days post-IVF). The vitrification procedure using Sarah constituted a 0.25-mL straw with a capsule having 50-µm pores inserted at one end. Embryos at each stage (EB and FB) were divided into 2 subgroups and vitrified by 1 of 2 methods: (1) multi-step (MS) group-a straw containing 2 embryos was sequentially loaded vertically into 1.5-mL tubes containing 6 different vitrification solutions: 10, 20, 40, 60, 80, or 100% ES (with 100% ES being 7.5% DMSO +7.5% EG + 20% FCS in TCM-199; 90 s each step) followed by 30 s each in 75 and 100% VS (100% VS being 18% DMSO +18% EG + 0.5 M trehalose + BSA in TCM-199); and (2) two-step (TS) group-the straw (2 embryos/straw) was loaded with 100% of ES (5 min), followed by 100% VS solution for 30 s. For both methods, at the end of the preparation steps, the straws were plunged directly into liquid N2. Non-vitrified embryos were maintained in in vitro culture as a control group (n = 102). The warming procedure consisted of placing the straws directly into 5-mL tubes containing 100, 50, 25% WS (WS = 1 M sucrose in TCM-199+ 20% FCS) at 38.6°C (for first solution) and at room temperature for all the rest (5 min each), before being placed into the holding medium. Embryos were recovered from the straws, incubated at 38.6 C in 5% CO2 in air in TCM 199 + 5% FCS, and evaluated for blastocoel re-expansion, embryo survival, and hatching rate at 2, 14, 48 h post-warming. Blastocyst re-expansion (2 h) after warming increased as the developmental stage progressed and was not affected by the vitrification method. In fact, it was significantly (P < 0.05) higher for FB vitrified in the MS and TS methods (77.90% and 71.25%, respectively) compared with the EB method (62.5% and 48.50%, respectively). At 24 h, survival rate of vitrified FB was significantly higher (P < 0.05) in the MS system (95.35%) compared with those in TS (86.25%). Survival rates of FB embryos for both methods (MS and TS) were significantly higher (P < 0.001) than EB embryos vitrified in MS (56.25%) and TS (56.55) methods. After 48 h of culture, the hatching rate for FB vitrified in the MS system (87.21%) was comparable with TS (77.5%) and control (85.3%) groups but significantly higher (P < 0.001) than vitrified EB in MS (43.75%) and TS (36.36%). In conclusion, we showed that a high survival rate of IVP embryos can be achieved by this new in-straw vitrification and warming device (“Sarah”), with hatching rates in vitro comparable with that of control fresh embryos. This method has the potential for use in direct embryo transfer in field conditions.

scholarly journals High in vitro survival rate of sheep in vitro produced blastocysts vitrified with a new method and device

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Sergio Ledda ◽  
Jen M. Kelly ◽  
Stefano Nieddu ◽  
Daniela Bebbere ◽  
Federica Ariu ◽  
...  
Keyword(s):  
Survival Rate ◽  
Survival Rates ◽  
Blastocyst Stage ◽  
Hatching Rate ◽  
High Survival ◽  
Apoptotic Cells ◽  
Embryo Survival ◽  
New Device ◽  
In Vitro Survival

Abstract Background To advance the use of embryo vitrification in veterinary practice, we developed a system in which embryo vitrification, warming and dilution can be performed within a straw. Ovine in vitro produced embryos (IVEP) were vitrified at either early (EBs: n = 74) or fully expanded blastocyst stage (FEBs: n = 195), using a new device named “E.Vit”, composed by a 0.25-mL straw with a 50-μm pore polycarbonate grid at one end. Embryos at each stage (EBs and FEBs) were vitrified by either Two-step (TS) or Multi-step (MS; 6 different concentrations of vitrification solutions) protocol. Non-vitrified embryos (n = 102) were maintained in in vitro culture as a control. Warming consisted of placing the straws directly into 1.5 mL tubes containing a TCM-199 solution with three decreasing concentrations of sucrose. Blastocyst re-expansion, embryo survival and hatching rate were evaluated at 2, 24 and 48 h post warming. The number of apoptotic cells was determined by TUNEL assay. Results Blastocyst re-expansion (2 h) after warming was higher (P < 0.05) in FEBs group, vitrified with the MS and TS methods (77.90% and 71.25%, respectively) compared with the EBs group (MS: 59.38% and TS: 48.50%, respectively). Survival rates of vitrified FEBs after 24 h IVC were higher (P < 0.001) in both methods (MS and TS) than vitrified EBs (MS: 56.25%; TS: 42.42%) and was higher (P < 0.05) in the MS method (94.19%) compared with those in TS (83.75%). After 48 h of culture the hatching rate for FEBs vitrified in MS system (91.86%) was similar to control (91.89%), but higher than FEB TS (77.5%) and EBs vitrified in MS (37.5%) and TS (33.33%). Number of apoptotic cells were higher in EBs, irrespective of the system used, compared to FEBs. The number of apoptotic cells in FEBs vitrified with MS was comparable to the control. Conclusions A high survival rate of IVP embryos can be achieved by the new “E.Vit” device with hatching rates in vitro comparable with control fresh embryos. This method has the potential for use in direct embryo transfer in field conditions.

High hydrostatic pressure treatment improves the quality of in vitro-produced ovine blastocysts

2011 ◽  
Vol 23 (6) ◽  
pp. 809 ◽  
Author(s):  
Luisa Bogliolo ◽  
Federica Ariu ◽  
Giovanni Leoni ◽  
Stefania Uccheddu ◽  
Daniela Bebbere
Keyword(s):  
Hydrostatic Pressure ◽  
Inner Cell Mass ◽  
Cell Mass ◽  
Cell Number ◽  
Lower Percentage ◽  
Control Group ◽  
Hatching Rate ◽  
Embryo Survival

Exposure to sub-lethal hydrostatic pressure (HP) treatment is emerging as an approach to improve the general resistance of gametes and embryos to in vitro conditions. The present study was aimed to evaluate the effect of HP treatment on in vitro-produced ovine blastocysts. Experiment 1 was aimed to define optimal treatment parameters: two different HP treatments were applied to blastocysts and embryo survival was evaluated. In Experiment 2, HP parameters (40 MPa, 70 min, 38°C) selected in Experiment 1 were used to treat blastocysts. Embryo quality was assessed and compared with untreated controls by counting total cell number, the inner cell mass (ICM) and trophectoderm (TE) cells and by evaluating nuclear picnosis. HP-treated blastocysts were processed for gene expression analysis (AQP3, ATP1A1, BAX, CDH1, HSP90β, NANOG, OCT4 and TP53) 1, 5 h after the end of HP exposure. Results showed that the hatching rate of embryos treated at 40 MPa was significantly higher than that of the 60 MPa-treated group (P < 0.01) and similar to untreated embryos. Blastocysts exposed at 40 MPa showed higher ICM (P < 0.05) and TE (P < 0.01) cell number and a lower percentage of picnotic nuclei (P < 0.05) compared with the control group. Significantly lower abundance for BAX (P < 0.01) and OCT4 (P < 0.05) transcripts were observed in HP embryos than in the control group. In conclusion, treatment with HP improved the quality of in vitro-produced ovine blastocysts by increasing their cell number and reducing the proportion of nuclear picnosis.

scholarly journals In Vitro Regeneration of Tea (Camellia sinensis (L). O. Kuntze) By Somatic Embryogenesis from Immature Cotyledon Tissues

2022 ◽  
Vol 9 (sp) ◽  
pp. 2587-2590
Author(s):  
Emine Yurteri ◽  
Mücahit Salih Can ◽  
Fatih Seyis ◽  
Haydar Kuplemez
Keyword(s):  
Somatic Embryogenesis ◽  
Survival Rate ◽  
Camellia Sinensis ◽  
In Vitro Regeneration ◽  
Phenylboronic Acid ◽  
Control Group ◽  
Ms Medium ◽  
Embryo Survival ◽  
Regeneration Rate

Tea (Camellia sinensis) is the world's most popular beverage plant, as well as an important plantation crop with high commercial value. It has been maintained for centuries through conventional vegetative propagation. Tea clonal propagation in vitro has the advantage of producing a large number of elite plants. If an efficient in vitro regeneration technology is available, this technique could be exploited for selection of tea plants for desired trait. The selected plants could be later on multiplied through in vitro or ex vitro techniques. The study aimed to induced somatic embryogenesis from immature embryo explants to genetic variaton. Different concentrations of phenylboronic acid with benzyladenine and phenylboronic acid with kinetin were tested in MS medium with 30 g/L sucrose and 8 g/L agar. MS medium without any plant growth regulators was used as control group. Considering the embryo survival rate, 1.5 mg/ L-1 phenylboronic acid + 1 mg/ L-1 kinetin produced highest result as 87.3% while lowest was in control group as 36.7%. The highest plant regeneration rate was found in 1,5 mg/ L-1 phenylboronic acid + 1 mg/ L-1 kinetin and 1.5 mg/ L-1 phenylboronic acid + 1 mg/ L-1 benzyladenine medium respectively as 58.3% and 55.6%. Kinetin treatment with increasing phenylboronic acid concentrations gave the best results in terms of somatic embryo survival rate. Also, kinetin treatment produced better results when compared to benzyladenine concentrations.

Effect of vitrification technique and assisted hatching on rabbit embryo developmental rate

Zygote ◽  
2009 ◽  
Vol 17 (1) ◽  
pp. 57-61 ◽  
Author(s):  
M. Popelková ◽  
Z. Turanová ◽  
L. Koprdová ◽  
A. Ostró ◽  
S. Toporcerová ◽  
...  
Keyword(s):  
Cell Number ◽  
Total Cell ◽  
Control Group ◽  
Assisted Hatching ◽  
Hatching Rate ◽  
Total Cell Number ◽  
Developmental Potential ◽  
Significant Difference ◽  
Rabbit Embryos

SummaryThe aim of the study was to determine the efficiency of two vitrification techniques followed by two assisted hatching (AH) techniques based on post-thaw developmental capacity of precompacted rabbit embryos and their ability to leave the zona pellucida (hatching) during in vitro culture. The total cell number and embryo diameter as additional markers of embryo quality after warming were evaluated. In vivo fertilized, in vitro cultured 8–12-cell rabbit embryos obtained from superovulated rabbit does were cryopreserved by two-step vitrification method using ethylene glycol (EG) as cryoprotectant or by one-step vitrification method with EG and Ficoll (EG+Ficoll). Thawed embryos were subjected to enzymatic or mechanical AH. Vitrified EG group showed significantly lower (P < 0.05) blastocyst rate (22.5%) and hatching rate (15%) than those vitrified with EG + Ficoll (63 and 63% resp.) and that of control (97 and 97% respectively). Significantly lower values of total cell number (P < 0.05) as well as embryo diameter (P < 0.01) in EG group compared with EG + Ficoll and control group were recorded. No significant difference was found in developmental potential of warmed embryos treated by either mechanical or enzymatic AH. The present study demonstrates that the EG + Ficoll vitrification protocol provides superior embryo survival rates over the EG vitrification protocol for 8–12-cell stage precompacted rabbit embryos. No positive effect of either mechanical or enzymatic AH on the post-thaw viability and quality of rabbit embryos in vitro was observed.

scholarly journals Vitrification of In Vitro Produced Porcine Blastocysts: Influence of Cryoprotectants Toxicity and Embryo Age

2019 ◽  
Vol 47 (1) ◽  
Author(s):  
Lain Uriel Ohlweiler ◽  
Joana Claudia Mezzalira ◽  
Alceu Mezzalira
Keyword(s):  
Cell Number ◽  
Lower Percentage ◽  
Toxicity Tests ◽  
Hatching Rate ◽  
Embryo Viability ◽  
Embryo Survival ◽  
Porcine Embryo ◽  
Negative Role ◽  
Cryoprotectant Solution

Background: Porcine embryos are sensible to all assisted reproduction manipulations, especially the ones that involve cryopreservation. Despite the high cryoprotectant concentrations routinely applied, vitrification is the most effective technique to date. These substances toxicity can also play a negative role in embryo viability. During in vitro porcine embryo production, the speed of development is often unevenly distributed. It is possible that their development speed, affects embryo tolerance to cryoprotectants. This study aimed to evaluate the toxicity of porcine embryos of days 5 or 6 of culture to cryoprotectant agents; as well as to assess embryo survival to vitrification.Material, Methods & Results: Parthenogenetic porcine blastocysts and expanded blastocysts of days 5 and 6 of culture were exposed to toxicity tests (experiments 1 and 2) and vitrification (experiment 3) using different protocols. In the first experiment, three different cryoprotectants were used (Dimethyl sulfoxide - DMSO, Ethylene glycol – EG, and Sucrose - SUC), combined in three different associations (G1: 15% EG + 15% DMSO with 0.5M SUC; G2: 16% EG + 16% DMSO with 0.4M SUC; G3: 18% EG + 18% DMSO with 0.5M SUC). In the fresh Control, embryos of day 6 are more sensible than the ones of day 5, whom showed a lower hatching rate (39.7 vs. 60.8%). After the toxicity (Experiment 1) test, the G1 showed better expansion rates in day 6 (50.0 vs 31.0 and 3.6% for G2 and G3) and higher hatching of day 6 compared to G2 and G3 (23.2, vs. 8.6 and 0.0% for G2 and G3). The fresh non hatched embryos at day 8, derived at day 6, had a lower percentage of cells with cleaved caspase-3 (20.2%) compared with the G1 (30.5%), G2 (31.4%) and G3 (30.5%). The hatched embryos of day 5 from G2 had lower total cell number (TCN) compared with the day 6 hatched embryos, whereas in G1 the TCN was not affected. The second experiment compared EG combined to one of these three extracellular cryoprotectants: Polyvinylpyrrolidone/sucrose/trehalose (respectively groups: PVP, SUC, TRE). The group SUC has raised the best results for day 5 embryos, whereas for day 6 embryos SUC and TRE were both best. The third experiment tested four vitrification protocols, being P1: EG+DMSO+TRE/warming with SUC; P2: EG+DMSO+TRE/warming TRE; P3: EG+TRE/ warming SUC; P4: EG+TRE/warming TRE. The expansion of vitrified day 5 embryos was higher in the P1 (20.0%) in comparison with the other three groups (4.3, 4.3 and 4.4% for P2, P3 and P4, respectively), with no difference for their hatching rates, been it lower comparing to the Control. Day 6 embryos showed no difference in expansion and hatching for the vitrified groups, been them lower than the Control.Discussion: Embryos obtained on day 6 are more sensible than the ones of day 5, fact observed when the embryos were exposed to cryoprotectant solution, as well by the behavior of the no treated Control embryos. The toxicity increases as it does the concentration of intracellular cryoprotectant, where over 16% of the intracellular cryoprotectors already affected the day 6 embryos development. For the day 5 embryos however, 15 or 16% of the intracellular cryoptrotectors, had similar behavior to the embryos. For the extracellular solutions, however, it is variable according the embryos development speed. Indeed, it is necessary to adjust the cryoprotectors to be used to cryopreserve porcine in vitro produced embryos obtained at days 5 and 6 of culture.

52 EFFECT OF CARBOXYLATED POLY-L-LYSINE ON THE POST-THAW VIABILITY OF IN VITRO-PRODUCED BOVINE BLASTOCYST

2015 ◽  
Vol 27 (1) ◽  
pp. 119
Author(s):  
A. N. Ha ◽  
K. L. Lee ◽  
Md. Fakruzzaman ◽  
S. S. Kim ◽  
P. R. Park ◽  
...  
Keyword(s):  
Survival Rate ◽  
Dimethyl Sulfoxide ◽  
Exposure Time ◽  
High Efficiency ◽  
Apoptotic Cell ◽  
Osmotic Shock ◽  
Hatching Rate ◽  
Cell Numbers ◽  
Bovine Blastocyst

Recently, there has been development of an antifreeze polyamino acid (carboxylated poly-l-lysine: PLL) as new cryoprotectants (CPA). This compound counts as amphoteric macromolecular cationic and anionic substituents (polyampholyte) by chemically modifying poly-lysine. In addition, PLL is highly safe and frequently used as a food additive in substitution for other CPA. Other common CPA have high toxicity and caused physiological damage. In vitro-produced blastocysts were randomly assigned into 3 groups: (1) vitrified embryos with PLL vitrification solution [PLL-vit-1: 15% PLL + 15% ethylene glycol (EG); PLL-vit-2: 30% PLL + 30% EG + 0.5 M sucrose], (2) vitrified embryos with Vajta et al. solution (Conv-vit-1: 7.5% dimethyl sulfoxide + 7.5% EG; Conv-vit-2: 16.5% dimethyl sulfoxide + 16.5% EG + 0.5 M sucrose), and (3) nonvitrified blastocysts (control). All embryos were frozen by droplet vitrification method. First, the PLL-vitrified embryos were exposed to 5, 10, and 15 min in the PLL-vit-1 and then putted for 30 to about 60 s in the PLL-vit-2. Then, we compared with each group regarding exposure time of Vit-1. Post-thaw survival rate of each exposure time did not significantly differ among the 3 groups (100 v. 100 v. 100%). However, hatching rate of the 10-min exposure group was higher than that of 5- and 15-min groups (75.0 v. 25.0 v. 66.7; P < 0.05). Therefore, we confirmed that exposure time of Vit-1 was exposed for a minimum of 10 min. The post-thawed survival rate of each vitrification method was not significantly different between PLL-vit and Conv-vit groups (97.7 v. 86.4%). The total cell numbers of blastocyst did not significantly differ among groups. However, the apoptotic cell numbers of blastocyst was significantly different between the control and Conv-vit groups (0.4 ± 0.6 v. 4.4 ± 3.9; P < 0.05) but was not different in control v. PLL-vit (0.4 ± 0.6 v. 2.1 ± 2.4) and Conv-vit v. PLL-vit (4.4 ± 3.9 v. 2.1 ± 2.4). In conclusion, PLL-vit for bovine blastocyst could reduce toxicity and osmotic shock and showed high efficiency on the quality of post-thawed bovine blastocysts compared with that of Conv-vit.This work was partly supported by a grant from the Next-Generation BioGreen 21 Program (No. PJ009587022014), IPET (Grant No. 112020-3), and a scholarship from the BK21 plus program. A-Na Ha, Kyeong-Lim Lee, and Md. Fakruzzaman were supported by BK21 plus fellowships at Gyeongsang National University, Republic of Korea.

239 USE OF CYCLIC ADENOSINE MONOPHOSPHATE MODULATORS IN IN VITRO PRODUCTION OF BOVINE EMBRYOS

2015 ◽  
Vol 27 (1) ◽  
pp. 209
Author(s):  
T. Fanti ◽  
N. M. Ortega ◽  
R. Garaguso ◽  
M. J. Franco ◽  
C. Herrera ◽  
...  
Keyword(s):  
Phosphodiesterase Inhibitor ◽  
Basal Medium ◽  
Cyclic Adenosine Monophosphate ◽  
Adenosine Monophosphate ◽  
Control Group ◽  
Hatching Rate ◽  
Bovine Embryos ◽  
Oocyte Competence

In vitro embryo production systems (IVP) try to emulate and enhance molecular events that occur in in vivo reproductive systems in order to increase, not only the number of embryos generated, but also their quality. Despite advances, IVP processes are still inefficient compared with in vivo systems. Several studies have attributed this deficiency to a lack of oocyte competence due to spontaneous premature resumption of meiotic maturation in the oocyte following the removal from its follicular environment. Therefore, our objective was to increase oocyte competence avoiding premature resumption of meiosis by using cyclic adenosine monophosphate modulators. Cumulus-oocyte complexes (COC) were obtained from ovaries of slaughterhouses, washed, and randomly allocated in 2 culture systems. Oocytes in the control group (IVM) were cultured for a period of 24 h in basal medium TCM-199 with EGF (1 µg mL–1) supplemented with rhFSH (25 mIU mL–1). Oocytes in the biphasic in vitro maturation (b-IVM) group were cultured for 2 h in a basal medium supplemented with a phosphodiesterase inhibitor, 3-isobutyl-1-methylxanthine (IBMX, 500 µM), and an activator of adenylate cyclase (forskolin, 100 µM). Subsequently, COC were washed and cultured in basal medium supplemented with cilostamide (20 µM) and rhFSH (25 mIU mL–1) for 24 h. Maturation rates were analysed and IVF was performed with a dose of 1 × 106 sperm cells mL–1 in IVF-SOF medium. The presumptive zygotes were cultured in continuous-single-culture medium (Irvine) supplemented with 8 mg mL–1 of BSA until they reached the blastocyst stage. No significant differences in maturation, cleavage, and cryotolerance were observed between b-IVM and IVM groups (P > 0.05; Table 1). This study showed that b-IVM produced a significant increase in IVP compared with the control (IVM) at Days 7 and 8 (P < 0.01). Blastocyst hatching rate was significant (P < 0.05) for both treatment and day of analysis. The b-IVM group yielded an increase of 10 and 7.5% at Days 7 and 8, respectively, of IVP. The biphasic maturation showed an improvement in quality regarding the control group, in the timing analysis of production, and hatching percentages, and these results show that the use of cyclic adenosine monophosphate modulators in the oocyte maturation process enhances oocyte competence, which is reflected in increased productivity and embryo quality. We propose this treatment as an alternative to the standard protocols currently used in IVP of bovine embryos. Table 1.Effect of treatment on maturation, cleavage, and cryotolerance

scholarly journals IN VITRO EVALUATION OF THE ANTHELMINTIC ACTIVITY OF RHIZOME EXTRACTS OF CURCUMA LONGA (LINN.)

2018 ◽  
Vol 11 (12) ◽  
pp. 425
Author(s):  
Jyoti Pandey ◽  
Suman Mishra ◽  
Kamal Jaiswal
Keyword(s):  
Curcuma Longa ◽  
Anthelmintic Activity ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Phytochemical Analysis ◽  
Alternative Source ◽  
Significant Efficacy ◽  
Phosphate Buffered Saline

Objective: The current study was carried out to evaluate the anthelmintic activity of the rhizome extract of Curcuma longa as an alternative source of effective remedies for nematodiasis.Methods: The anthelmintic activity of the C. longa was assessed in vitro against Haemonchus spp., a gastrointestinal (abomasum) parasite of goats. Different concentrations of the extracts (1 mg/mL, 2.5 mg/mL, 5 mg/mL, and 10 mg/mL) in phosphate-buffered saline (PBS) were tested, and the results expressed in terms of time of paralysis (minute) and time of death (minute) of the worms. Albendazole (1 mg/mL) was used as a reference (positive control) and PBS as a control group (negative control).Results: The qualitative phytochemical analysis of the methanolic extract (ME) of the plant disclosed the presence of alkaloids, glycosides, terpenoids, flavonoids, tannins, saponins, phenol, anthraquinone, and carbohydrates; whereas, the aqueous extract (AE) showed the presence of alkaloids, carbohydrate, flavonoids, and saponins. Both ME and AE of the C. longa (rhizome) expressed significant efficacy (p≤0.05) in causing paralysis as well as the death of the worms within 12 h of exposure at all tested concentrations, as compared to the negative control. The rhizome extracts of C. longa showed dose-dependent efficacy in causing paralysis of the worm motility and the final progression to death. The results showed that the ME at 10 mg/mL was significantly more potent (p≤0.05) over the AE.Conclusions: This study concluded that the rhizome extract of C. longa exhibited potent anthelmintic efficacy against the nematode parasite, Haemonchus spp.

Effects of different cryopreservation methods on post-thaw culture conditions of in vitro produced bovine embryos

Zygote ◽  
2011 ◽  
Vol 20 (2) ◽  
pp. 117-122 ◽  
Author(s):  
Alessandra Corallo Nicacio ◽  
Renata Simões ◽  
Fabiola Freitas de Paula-Lopes ◽  
Flavia Regina Oliveira de Barros ◽  
Maria Angelica Peres ◽  
...  
Keyword(s):  
Culture Conditions ◽  
Slow Freezing ◽  
Control Group ◽  
Hatching Rate ◽  
Rapid Freezing ◽  
Bovine Embryos ◽  
Group 10 ◽  
Controlled Freezing ◽  
Hatching Rates

SummaryThe aim of this work was to evaluate the effect of cryopreservation protocols on subsequent development of in vitro produced bovine embryos under different culture conditions. Expanded in vitro produced blastocysts (n = 600) harvested on days 7–9 were submitted to controlled freezing [slow freezing group: 10% ethylene glycol (EG) for 10 min and 1.2°C/min cryopreservation]; quick-freezing [rapid freezing group: 10% EG for 10 min, 20% EG + 20% glycerol (Gly) for 30 s]; or vitrification [vitrification group: 10% EG for 10 min, 25% EG + 25% Gly for 30 s] protocols. Control group embryos were not exposed to cryoprotectant or cryopreservation protocols and the hatching rate was evaluated on day 12 post-insemination. In order to evaluate development, frozen–thawed embryos were subjected to granulosa cell co-culture in TCM199 or SOFaa for 4 days. Data were analyzed by PROC MIXED model using SAS Systems for Windows®. Values were significant at p < 0.05. The hatching rate of the control group was 46.09%. In embryos cultured in TCM199, slow freezing and vitrification group hatching rates were 44.65 ± 5.94% and 9.43 ± 6.77%, respectively. In embryos cultured in SOFaa, slow freezing and vitrification groups showed hatching rates of 11.65 ± 3.37 and 8.67 ± 4.47%, respectively. In contrast, the rapid freezing group embryos did not hatch, regardless of culture medium. The slow freezing group showed higher hatching rates than other cryopreservation groups. Under such conditions, controlled freezing (1.2°C/min) can be an alternative to cryopreservation of in vitro produced bovine embryos.

Sign in / Sign up

Export Citation Format

Share Document