Fuel properties and fire behaviour characteristics of prescribed fire in pine-dominated forests at Nam Nao National Park, Thailand

2013 ◽  
Vol 22 (5) ◽  
pp. 615 ◽  
Author(s):  
K. Wanthongchai ◽  
V. Tarusadamrongdet ◽  
K. Chinnawong ◽  
K. Sooksawat
Keyword(s):  
Prescribed Fire ◽  
National Park ◽  
Forest Type ◽  
Pine Forest ◽  
Fuel Load ◽  
Fire Behaviour ◽  
Temperature Changes ◽  
Fuel Loads ◽  
Soil Temperatures ◽  
Fuel Components

Anthropogenic burning has become a common phenomenon throughout Thailand’s pine-dominated ecosystems. This study investigated fuel loads and experimental fire behaviour characteristics in a degraded pine forest (PF) and a pine–oak forest (O-PF), at Nam Nao National Park, Thailand in three replicate 50 × 50-m plots of each forest type. Pre-burn fuel loads, fire behaviour descriptors, fire and soil temperature, the residues left after burning and post-burn fuel recovery for 1 year were investigated. The aboveground fuel load in PF (1.29 kg m–2) was significantly higher than in O-PF (0.87 kg m–2). The main fuel components in the PF stand were grass (45%) and litter (44%), whereas leaf litter was the predominant fuel in the O-PF stand (55%). The fire behaviour characteristics in the PF stand were significantly greater than those in the O-PF stand. Burning at the O-PF and the PF was respectively classified as low (48 kW m–1) and medium intensity (627 kW m–1). During the burning experiment, the surface soil temperatures at all sites were higher than 250°C. However, fire did not cause temperature changes in the deeper soil layers. In the pine forest the post-burn fuel loads 1 year after the fire remained lower than the pre-burn level. These results may imply that a pine forest at Nam Nao National Park requires more than 1 year of fire-free period to recover back to the pre-burn conditions.

scholarly journals Impacts of increasing fine fuel loads on acorn germination and early growth of oak seedlings

Fire Ecology ◽  
2021 ◽  
Vol 17 (1) ◽  
Author(s):  
Rachel E. Nation ◽  
Heather D. Alexander ◽  
Geoff Denny ◽  
Jennifer K. McDaniel ◽  
Alison K. Paulson
Keyword(s):  
Prescribed Fire ◽  
Germination Rate ◽  
Growth Patterns ◽  
Leaf Number ◽  
Fuel Load ◽  
Quercus Alba ◽  
White Oak ◽  
Fuel Treatment ◽  
Basal Diameter ◽  
Fuel Loads

Abstract Background Prescribed fire is increasingly used to restore and maintain upland oak (Quercus L. spp.) ecosystems in the central and eastern US. However, little is known about how prescribed fire affects recently fallen acorns under different fine fuel loads, which can vary with stand composition and basal area, burn season, and fire frequency. We conducted plot-level (1 m2) burns in an upland oak stand in northern Mississippi, USA, during December 2018, using single (i.e., ambient), double, and triple fine fuel loads, representative of those in nearby unburned and recently fire-treated, closed-canopy stands. Pre burn, we placed 30 acorns each of white oak (Quercus alba L.) and Shumard oak (Quercus shumardii Buckley) ~1 cm below the litter surface in five plots of each fuel treatment. Immediately post burn, we planted unburned and burned acorns in a greenhouse. After ~50% of each species’ unburned acorns germinated, we measured percent germination and height, basal diameter, and leaf number of germinating seedlings weekly for 11 weeks. Then, we harvested seedlings to determine above- and belowground biomass. Results The single fuel treatment reduced acorn germination rates of both species to ~40% compared to ~88% in unburned acorns. When burned in double and triple fuel loads, acorns of both species had a <5% germination rate. There was no difference in basal diameter, leaf number, or biomass of seedlings from burned versus unburned acorns for either species. However, seedlings originating from burned acorns of both species were ~11% shorter than those from unburned acorns. Thus, both species responded similarly to fuel load treatments. Conclusions Acorns of both species exhibited greater survival with lower fine fuel loads, and consequently lower percent fuel consumption. Acorns germinating post fire generally produced seedlings with growth patterns similar to seedlings originating from unburned acorns. These findings indicate that regular, repeated prescribed fires or canopy reductions that limit fine fuel accumulation and create heterogeneous fuel beds are likely to increase acorn germination rates relative to unburned sites or those with recently introduced fire.

Forest fuels and potential fire behaviour 12 years after variable-retention harvest in lodgepole pine

2016 ◽  
Vol 25 (6) ◽  
pp. 633 ◽  
Author(s):  
Justin S. Crotteau ◽  
Christopher R. Keyes ◽  
Elaine K. Sutherland ◽  
David K. Wright ◽  
Joel M. Egan
Keyword(s):  
Lodgepole Pine ◽  
Structural Complexity ◽  
Fuel Load ◽  
Fire Behaviour ◽  
Forest Fuels ◽  
Fuel Loads ◽  
Variable Retention ◽  
Harvesting Technique ◽  
Trade Offs ◽  
Variable Retention Harvesting

Variable-retention harvesting in lodgepole pine offers an alternative to conventional, even-aged management. This harvesting technique promotes structural complexity and age-class diversity in residual stands and promotes resilience to disturbance. We examined fuel loads and potential fire behaviour 12 years after two modes of variable-retention harvesting (dispersed and aggregated retention patterns) crossed by post-harvest prescribed fire (burned or unburned) in central Montana. Results characterise 12-year post-treatment fuel loads. We found greater fuel load reduction in treated than untreated stands, namely in the 10- and 100-h classes (P = 0.002 and 0.049 respectively). Reductions in 1-h (P < 0.001), 10-h (P = 0.008) and 1000-h (P = 0.014) classes were greater in magnitude for unburned than burned treatments. Fire behaviour modelling incorporated the regenerating seedling cohort into the surface fuel complex. Our analysis indicates greater surface fireline intensity in treated than untreated stands (P < 0.001), and in unburned over burned stands (P = 0.001) in dry, windy weather. Although potential fire behaviour in treated stands is predicted to be more erratic, within-stand structural variability reduces probability of crown fire spread. Overall, results illustrate trade-offs between potential fire attributes that should be acknowledged with variable-retention harvesting.

Relating fuel loads to overstorey structure and composition in a fire-excluded Sierra Nevada mixed conifer forest

2015 ◽  
Vol 24 (4) ◽  
pp. 484 ◽  
Author(s):  
Jamie M. Lydersen ◽  
Brandon M. Collins ◽  
Eric E. Knapp ◽  
Gary B. Roller ◽  
Scott Stephens
Keyword(s):  
Sierra Nevada ◽  
Predictive Models ◽  
Vegetation Type ◽  
Fuel Load ◽  
Small Scale ◽  
Conifer Forest ◽  
Fire Behaviour ◽  
Mixed Conifer ◽  
Fuel Loads ◽  
Mixed Conifer Forest

Although knowledge of surface fuel loads is critical for evaluating potential fire behaviour and effects, their inherent variability makes these difficult to quantify. Several studies relate fuel loads to vegetation type, topography and spectral imaging, but little work has been done examining relationships between forest overstorey variables and surface fuel characteristics on a small scale (<0.05 ha). Within-stand differences in structure and composition would be expected to influence fuel bed characteristics, and thus affect fire behaviour and effects. We used intensive tree and fuel measurements in a fire-excluded Sierra Nevada mixed conifer forest to assess relationships and build predictive models for loads of duff, litter and four size classes of downed woody fuels to overstorey structure and composition. Overstorey variables explained a significant but somewhat small percentage of variation in fuel load, with marginal R2 values for predictive models ranging from 0.16 to 0.29. Canopy cover was a relatively important predictor for all fuel components, although relationships varied with tree species. White fir abundance had a positive relationship with total fine woody fuel load. Greater pine abundance was associated with lower load of fine woody fuels and greater load of litter. Duff load was positively associated with total basal area and negatively associated with oak abundance. Knowledge of relationships contributing to within-stand variation in fuel loads can increase our understanding of fuel accumulation and improve our ability to anticipate fine-scale variability in fire behaviour and effects in heterogeneous mixed species stands.

scholarly journals Improving silvicultural practices for Mediterranean forests through fire behaviour modelling using LiDAR-derived canopy fuel characteristics

2019 ◽  
Vol 28 (11) ◽  
pp. 823 ◽  
Author(s):  
Brigite Botequim ◽  
Paulo M. Fernandes ◽  
José G. Borges ◽  
Eduardo González-Ferreiro ◽  
Juan Guerra-Hernández
Keyword(s):  
Bulk Density ◽  
Forest Type ◽  
Classification Tree ◽  
Airborne Lidar ◽  
Fuel Load ◽  
Mediterranean Forests ◽  
Fire Behaviour ◽  
Fuel Loading ◽  
Fuel Characteristics ◽  
Stand Height

Wildfires cause substantial environmental and socioeconomic impacts and threaten many Spanish forested landscapes. We describe how LiDAR-derived canopy fuel characteristics and spatial fire simulation can be integrated with stand metrics to derive models describing fire behaviour. We assessed the potential use of very-low-density airborne LiDAR (light detection and ranging) data to estimate canopy fuel characteristics in south-western Spain Mediterranean forests. Forest type-specific equations were used to estimate canopy fuel attributes, namely stand height, canopy base height, fuel load, bulk density and cover. Regressions explained 61–85, 70–85, 38–96 and 75–95% of the variability in field estimated stand height, canopy fuel load, crown bulk density and canopy base height, respectively. The weakest relationships were found for mixed forests, where fuel loading variability was highest. Potential fire behaviour for typical wildfire conditions was predicted with FlamMap using LiDAR-derived canopy fuel characteristics and custom fuel models. Classification tree analysis was used to identify stand structures in relation to crown fire likelihood and fire suppression difficulty levels. The results of the research are useful for integrating multi-objective fire management decisions and effective fire prevention strategies within forest ecosystem management planning.

Effects of fuel load and moisture content on fire behaviour and heating in masticated litter-dominated fuels

2013 ◽  
Vol 22 (4) ◽  
pp. 440 ◽  
Author(s):  
Jesse K. Kreye ◽  
Leda N. Kobziar ◽  
Wayne C. Zipperer
Keyword(s):  
Moisture Content ◽  
Fuel Load ◽  
Maximum Temperature ◽  
Fire Behaviour ◽  
Fuel Loading ◽  
Pine Flatwoods ◽  
Rate Of Spread ◽  
Soil Temperatures ◽  
Fuel Moisture Content ◽  
In Fire

Mechanical fuels treatments are being used in fire-prone ecosystems where fuel loading poses a hazard, yet little research elucidating subsequent fire behaviour exists, especially in litter-dominated fuelbeds. To address this deficiency, we burned constructed fuelbeds from masticated sites in pine flatwoods forests in northern Florida with palmetto-dominated understoreys and examined the effects of fuel load and fuel moisture content (FMC) on fire behaviour. Flame lengths (49–140 cm) and fireline intensity (183–773 kJ m–1 s–1) increased with loading (10–30 Mg ha–1) and were reduced by 40 and 47% with increasing FMC from 9 to 13%. Rate of spread was not influenced by fuel load, but doubled under drier FMC. Fuel consumption was >90% for all burns. Soil temperatures were influenced by both fuel load and FMC, but never reached lethal temperatures (60°C). However, temperatures of thermocouple probes placed at the fuelbed surface reached 274–503°C. Probe maximum temperature and duration at temperatures ≥60°C (9.5–20.0°C min) both increased with fuel load, but were unaffected by FMC. The fire behaviour observed in these unique litter-dominated fuelbeds provides additional insight into the burning characteristics of masticated fuels in general.

Decision support tools to improve the effectiveness of hazardous fuel reduction treatments in the New Jersey Pine Barrens

2009 ◽  
Vol 18 (3) ◽  
pp. 268 ◽  
Author(s):  
Kenneth L. Clark ◽  
Nicholas Skowronski ◽  
John Hom ◽  
Matthew Duveneck ◽  
Yude Pan ◽  
...  
Keyword(s):  
New Jersey ◽  
Forest Fire ◽  
Prescribed Fire ◽  
Wildland Fire ◽  
Fire Service ◽  
Fuel Load ◽  
Pine Barrens ◽  
Fuel Reduction ◽  
Fuel Loads ◽  
Fuel Accumulation

Our goal is to assist the New Jersey Forest Fire Service and federal wildland fire managers in the New Jersey Pine Barrens evaluate where and when to conduct hazardous fuel reduction treatments. We used remotely sensed LIDAR (Light Detection and Ranging System) data and field sampling to estimate fuel loads and consumption during prescribed fire treatments. This information was integrated with data on prescribed fire treatments conducted by the New Jersey Forest Fire Service over the last 15 years to produce and interpret maps of current fuel loads. Forest productivity measurements and models were then used to estimate rates of fuel accumulation through time. We could then calculate return intervals for desired fuel load conditions. Through formal workshops and frequent discussions with state and federal fire managers, our results enhance the ability of these agencies to make key decisions regarding the effectiveness and longevity of hazardous fuels treatments.

Fuel accumulation and forest structure change following hazardous fuel reduction treatments throughout California

2015 ◽  
Vol 24 (3) ◽  
pp. 361 ◽  
Author(s):  
Nicole M. Vaillant ◽  
Erin K. Noonan-Wright ◽  
Alicia L. Reiner ◽  
Carol M. Ewell ◽  
Benjamin M. Rau ◽  
...  
Keyword(s):  
Bulk Density ◽  
Prescribed Fire ◽  
Forest Structure ◽  
Fire Regimes ◽  
Post Treatment ◽  
Fuel Load ◽  
Fire Behaviour ◽  
Fuel Treatments ◽  
Minimal Impact ◽  
Canopy Bulk Density

Altered fuel conditions coupled with changing climate have disrupted fire regimes of forests historically characterised by high-frequency and low-to-moderate-severity fire. Managers use fuel treatments to abate undesirable fire behaviour and effects. Short-term effectiveness of fuel treatments to alter fire behaviour and effects is well documented; however, long-term effectiveness is not well known. We evaluated surface fuel load, vegetation cover and forest structure before and after mechanical and fire-only treatments over 8 years across 11 National Forests in California. Eight years post treatment, total surface fuel load returned to 67 to 79% and 55 to 103% of pretreatment levels following fire-only and mechanical treatments respectively. Herbaceous or shrub cover exceeded pretreatment levels two-thirds of the time 8 years after treatment. Fire-only treatments warranted re-entry at 8 years post treatment owing to the accumulation of live and dead fuels and minimal impact on canopy bulk density. In general, mechanical treatments were more effective at reducing canopy bulk density and initially increasing canopy base height than prescribed fire. However, elevated surface fuel loads, canopy base height reductions in later years and lack of restoration of fire as an ecological process suggest that including prescribed fire would be beneficial.

The effect of fire severity level on postfire recovery of hazel and raspberry in east-central Alberta

1985 ◽  
Vol 63 (4) ◽  
pp. 672-677 ◽  
Author(s):  
Mark Johnston ◽  
Paul Woodard
Keyword(s):  
Prescribed Fire ◽  
National Park ◽  
Fire Severity ◽  
Fire Effects ◽  
Height Growth ◽  
Fuel Load ◽  
East Central ◽  
Corylus Cornuta ◽  
Number Of Leaves ◽  
In Fire

A study of the effects of fire on the regrowth of beaked hazel (Corylus cornuta Marsh.) and wild red raspberry (Rubus strigosus Michx.) was carried out in Elk Island National Park, Alberta. Shrubs growing under an aspen stand were subjected to five levels of fire severity by artificially adjusting the fuel load on small plots within a larger prescribed fire. Effects studied included mortality, number of stem sprouts, height growth of sprouts, and number of leaves per sprout, all during the first growing season, and biomass after the second season. Generally, fire killed the shrub stems at all severity levels. Variation in fire severity had little significant effect on regrowth, except that lower levels seemed to favor higher numbers of hazel sprouts and increased raspberry height growth.

scholarly journals Variation in fuel structure of boreal fens

2016 ◽  
Vol 46 (5) ◽  
pp. 683-695 ◽  
Author(s):  
T.J. Schiks ◽  
B.M. Wotton ◽  
M.R. Turetsky ◽  
B.W. Benscoter
Keyword(s):  
Woody Debris ◽  
Front Propagation ◽  
Fuel Load ◽  
Organic Layer ◽  
Fuel Loads ◽  
Boreal Peatlands ◽  
Downed Woody Debris ◽  
Northern Alberta ◽  
Fuel Components

Wildfire frequency and severity in boreal peatlands can be limited by wet fuel conditions, but increases in burn severity can occur when lower water table positions cause drying of fuels. To date, most studies on northern peatland fires have focused on ombrotrophic bogs. Though minerotrophic fens are the most common type of peatland in North America, the influence of fuel structure and loading on potential fire behaviour in boreal fens is poorly understood. To investigate the potential for widespread flame front propagation across boreal fens, we quantified the fuel components present in three generalized boreal fen types (open, shrub, and treed fens) in northern Alberta, Canada. The loadings of aerial fuels, tall shrubs, and downed woody debris varied significantly among fen types. Fuel loads tended to be smallest in the open fens and largest in the treed fens. Open and shrub fens had larger loads of total surface fuels relative to treed fens, with short-statured shrubs being the dominant contributor to surface fuel load. Based on our observations of available fuel loads, each of the fen types may support moderate- to high-intensity fire following long-term drying, which may not only consume some fraction of the aboveground biomass, but also provide a substantial downward pulse of energy to initiate smouldering in the organic layer.

Effects of fire frequency on prescribed fire behaviour and soil temperatures in dry dipterocarp forests

2011 ◽  
Vol 20 (1) ◽  
pp. 35 ◽  
Author(s):  
Kobsak Wanthongchai ◽  
Johann G. Goldammer ◽  
Jürgen Bauhus
Keyword(s):  
Ground Level ◽  
Flame Height ◽  
Temperature Threshold ◽  
Fire Behaviour ◽  
The Past ◽  
Fuel Loads ◽  
Dipterocarp Forests ◽  
Soil Temperatures ◽  
Burned Site ◽  
Duration Of Heating

This study investigated how fire frequencies and fuel loads influence fire behaviour and soil heating in dry dipterocarp forests of the Huai Kha Khaeng Wildlife Sanctuary, Thailand. Fire behaviour and soil temperatures during burning were measured on a series of plots with different past fire frequencies ranging from unburned control, to rarely, infrequently and frequently burned, representing fire occurrences in 0, 1, 2 and 7 out of the past 10 years respectively. The pre-burning loads of fine fuel including grasses, herbs, shrubs, seedlings, saplings and litters increased with the length of the previous fire-free interval. The rate of spread, flame height, fireline intensity and maximum soil temperatures at any soil depths were not significantly different between the past burning regimes, so fires were classed as low-intensity and low-severity surface fire. The longest duration of heating with temperatures >60°C at ground level occurred at the rarely burned site (~14 min), followed by the infrequently burned site (~12 min) and the frequently burned site (~8 min). However, the duration of heating above any given critical temperature threshold at 2- and 5-cm soil depths was less than 1 min across all regimes. From a fuel management perspective, there does not appear to be a need to carry out prescribed burns more frequently than every 6–7 years, because fine fuel loads did not continue to accumulate substantially beyond 7 years after a fire.

Sign in / Sign up

Export Citation Format

Share Document