Asymmetries in Path expression in Ye’kwana

2020 ◽  
Author(s):  
Natalia Cáceres Arandia
Keyword(s):  
Motion Events ◽  
Path Expression ◽  
Almost All ◽  
Spontaneous Motion

Abstract Ye’kwana is an Amazonian language of the Cariban family spoken by a group of about 8,700 people in Venezuela and Brazil. This paper explores the expression of Path in spontaneous motion events based on spoken data collected for the documentation and description of the language including data collected with the Trajectoire elicitation material (Ishibashi et al. 2006). In Ye’kwana, Path is mainly expressed by postpositional and adverbial stems: there is a rich inventory of 80 postpositions all compatible with locative and either allative or perlative uses and 29 spatial adverbs, most of deictic nature. Source is expressed with a dedicated suffix (-nno) which combines with almost all the spatial postpositions and adverbs. The data show that the asymmetries in the expression of Path are not only found between Source and Goal but also need to include the expression of Medium for which the language has dedicated forms.

Expression of spontaneous motion events in Stieng

2021 ◽  
Author(s):  
Noëllie Bon
Keyword(s):  
Linguistic Expression ◽  
Motion Events ◽  
Wide Range ◽  
Spontaneous Motion

Abstract This study investigates the expression of Source and Goal in spontaneous motion events in Stieng (Cambodia, Vietnam). The analysis is based on data collected in Cambodia, using the Trajectoire video kit (Ishibashi et al. 2006). Regardless the type of Ground, Stieng data includes a wide range of constructions in describing motion events, combining lexical and grammatical tools (verbs and adnominals). While morphosyntactic resources available to express Source and Goal are formally similar, Stieng data shows that the Goal tends to be privileged compared to the Source, at the semantic, morphosyntactic, and syntactic levels. However, Source and Goal tend to be symmetrical with respect to the semantic distinctions of the verbs, and potential (a)symmetries with respect to the discourse level remain to be clarified. Instances of asymmetries in favor of the Goal tend to support previous studies that postulated a tendency for languages to privilege the Goal in the linguistic expression.

Exploring source/goal asymmetries in spontaneous and caused motion expression in Yuhup

2021 ◽  
Author(s):  
Ana María Ospina-Bozzi ◽  
Caterine Cita-Triana
Keyword(s):  
Motion Events ◽  
Structural Variety ◽  
The Asymmetry ◽  
The One ◽  
Nominal Morphology ◽  
Specialized System ◽  
Spontaneous Motion

Abstract The aim of this paper is to explore the asymmetry in the expression of Goal and Source in spontaneous and caused motion events in Yuhup (Makú/Naduhup family). We examine the asymmetries at the semantic, morphological and syntactic levels. As this language does not have a specialized system of nominal morphology that distinguishes the ground constituents representing the Source or the Goal of a movement, an asymmetrical treatment of Source and Goal is not evident. However, verbal semantics make more distinctions for Goal than for Source, ground constituents are more frequent in the expression of motion to(wards) the Goal than the one (away) from the Source, and structural variety and complexity differentiate between Source and Goal expression. Also, the Goal bias is stronger in the descriptions of caused motion than in the ones of spontaneous motion. The data were collected using tools designed for elicitation of spontaneous and caused motion events.

Habitat Association of Klebsiella Species

1985 ◽  
Vol 6 (2) ◽  
pp. 52-58 ◽  
Author(s):  
Susan T. Bagley
Keyword(s):  
Drinking Water ◽  
Gastrointestinal Tract ◽  
Surface Waters ◽  
Industrial Effluents ◽  
Opportunistic Pathogen ◽  
Habitat Associations ◽  
Habitat Association ◽  
Klebsiella Species ◽  
Almost All ◽  
Polluted Waters

AbstractThe genus Klebsiella is seemingly ubiquitous in terms of its habitat associations. Klebsiella is a common opportunistic pathogen for humans and other animals, as well as being resident or transient flora (particularly in the gastrointestinal tract). Other habitats include sewage, drinking water, soils, surface waters, industrial effluents, and vegetation. Until recently, almost all these Klebsiella have been identified as one species, ie, K. pneumoniae. However, phenotypic and genotypic studies have shown that “K. pneumoniae” actually consists of at least four species, all with distinct characteristics and habitats. General habitat associations of Klebsiella species are as follows: K. pneumoniae—humans, animals, sewage, and polluted waters and soils; K. oxytoca—frequent association with most habitats; K. terrigena— unpolluted surface waters and soils, drinking water, and vegetation; K. planticola—sewage, polluted surface waters, soils, and vegetation; and K. ozaenae/K. rhinoscleromatis—infrequently detected (primarily with humans).

SEM Cold Stage Techniques for the Observation of Vegetative and Floral Apices of Oat (Avena sativa L.) Plants

1977 ◽  
Vol 35 ◽  
pp. 590-591
Author(s):  
B. K. Kirchoff ◽  
L.F. Allard ◽  
W.C. Bigelow
Keyword(s):  
Critical Point ◽  
Avena Sativa ◽  
Substantial Improvement ◽  
Fresh Tissue ◽  
Cold Stage ◽  
Critical Point Drying ◽  
Almost All ◽  
Cell Collapse ◽  
Conductive Paint ◽  
Carbon Based

In attempting to use the SEM to investigate the transition from the vegetative to the floral state in oat (Avena sativa L.) it was discovered that the procedures of fixation and critical point drying (CPD), and fresh tissue examination of the specimens gave unsatisfactory results. In most cases, by using these techniques, cells of the tissue were collapsed or otherwise visibly distorted. Figure 1 shows the results of fixation with 4.5% formaldehyde-gluteraldehyde followed by CPD. Almost all cellular detail has been obscured by the resulting shrinkage distortions. The larger cracks seen on the left of the picture may be due to dissection damage, rather than CPD. The results of observation of fresh tissue are seen in Fig. 2. Although there is a substantial improvement over CPD, some cell collapse still occurs.Due to these difficulties, it was decided to experiment with cold stage techniques. The specimens to be observed were dissected out and attached to the sample stub using a carbon based conductive paint in acetone.

Electron microscopy studies of plasma-sprayed materials

1983 ◽  
Vol 41 ◽  
pp. 70-71
Author(s):  
K.R. Subramanian ◽  
A.H. King ◽  
H. Herman
Keyword(s):  
Plasma Spraying ◽  
Substrate Surface ◽  
Flame Temperature ◽  
Ceramic Coatings ◽  
Metallic Substrates ◽  
Hot Plasma ◽  
Almost All ◽  
Plasma Sprayed ◽  
Hostile Environments ◽  
Plasma Spraying Process

Plasma spraying is a technique which is used to apply coatings to metallic substrates for a variety of purposes, including hardfacing, corrosion resistance and thermal barrier applications. Almost all of the applications of this somewhat esoteric fabrication technique involve materials in hostile environments and the integrity of the coatings is of paramount importance: the effects of process variables on such properties as adhesive strength, cohesive strength and hardness of the substrate/coating system, however, are poorly understood.Briefly, the plasma spraying process involves forming a hot plasma jet with a maximum flame temperature of approximately 20,000K and a gas velocity of about 40m/s. Into this jet the coating material is injected, in powder form, so it is heated and projected at the substrate surface. Relatively thick metallic or ceramic coatings may be speedily built up using this technique.

Vacuum System to Minimize the Specimen Contamination of High-Performance EM

1977 ◽  
Vol 35 ◽  
pp. 68-69
Author(s):  
N. Yoshimura ◽  
K. Shirota ◽  
T. Etoh
Keyword(s):  
Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
High Vacuum ◽  
Vacuum System ◽  
Pump System ◽  
Pumping System ◽  
Diffusion Pump ◽  
Almost All ◽  
Cascade Type

One of the most important requirements for a high-performance EM, especially an analytical EM using a fine beam probe, is to prevent specimen contamination by providing a clean high vacuum in the vicinity of the specimen. However, in almost all commercial EMs, the pressure in the vicinity of the specimen under observation is usually more than ten times higher than the pressure measured at the punping line. The EM column inevitably requires the use of greased Viton O-rings for fine movement, and specimens and films need to be exchanged frequently and several attachments may also be exchanged. For these reasons, a high speed pumping system, as well as a clean vacuum system, is now required. A newly developed electron microscope, the JEM-100CX features clean high vacuum in the vicinity of the specimen, realized by the use of a CASCADE type diffusion pump system which has been essentially improved over its predeces- sorD employed on the JEM-100C.

Quantitative Freeze Fracture Studies of Gap Junctions in Somatic Cell Hybrids, Their Parents, and Revertants

1976 ◽  
Vol 34 ◽  
pp. 218-219
Author(s):  
W. J. Larsen ◽  
R. Azarnia ◽  
W. R. Loewenstein
Keyword(s):  
Gap Junctions ◽  
Striated Muscle ◽  
Freeze Fracture ◽  
Cell Movement ◽  
Dye Molecules ◽  
Somatic Cell Hybrids ◽  
Cell Coupling ◽  
Normal Cells ◽  
Mediate Cell ◽  
Almost All

Although the physiological significance of the gap junction remains unspecified, these membrane specializations are now recognized as common to almost all normal cells (excluding adult striated muscle and some nerve cells) and are found in organisms ranging from the coelenterates to man. Since it appears likely that these structures mediate the cell-to-cell movement of ions and small dye molecules in some electrical tissues, we undertook this study with the objective of determining whether gap junctions in inexcitable tissues also mediate cell-to-cell coupling.To test this hypothesis, a coupling, human Lesh-Nyhan (LN) cell was fused with a non-coupling, mouse cl-1D cell, and the hybrids, revertants, and parental cells were analysed for coupling with respect both to ions and fluorescein and for membrane junctions with the freeze fracture technique.

Analytical Electron Microscopy Study of Second-Phase Particles in 7075 and 7475 Aluminum Alloys

1985 ◽  
Vol 43 ◽  
pp. 348-349
Author(s):  
M. Raghavan ◽  
J. Y. Koo ◽  
J. W. Steeds ◽  
B. K. Park
Keyword(s):  
Aluminum Alloys ◽  
Silicon Oxide ◽  
Analytical Electron Microscopy ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Partial Substitution ◽  
Second Phase ◽  
X Ray ◽  
Second Phase Particles ◽  
Almost All

X-ray microanalysis and Convergent Beam Electron Diffraction (CBD) studies were conducted to characterize the second phase particles in two commercial aluminum alloys -- 7075 and 7475. The second phase particles studied were large (approximately 2-5μm) constituent phases and relatively fine ( ∼ 0.05-1μn) dispersoid particles, Figures 1A and B. Based on the crystal structure and chemical composition analyses, the constituent phases found in these alloys were identified to be Al7Cu2Fe, (Al,Cu)6(Fe,Cu), α-Al12Fe3Si, Mg2Si, amorphous silicon oxide and the modified 6Fe compounds, in decreasing order of abundance. The results of quantitative X-ray microanalysis of all the constituent phases are listed in Table I. The data show that, in almost all the phases, partial substitution of alloying elements occurred resulting in small deviations from the published stoichiometric compositions of the binary and ternary compounds.

Sign in / Sign up

Export Citation Format

Share Document