Wear and corrosion resistance of AZ91 magnesium alloy coated by pulsed current electrodeposited Ni–Al2O3 nanocomposite

2017 ◽  
Vol 95 (2) ◽  
pp. 114-120 ◽  
Author(s):  
M. Ghamari ◽  
A. A. Amadeh
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Pulsed Current ◽  
Az91 Magnesium Alloy ◽  
Wear And Corrosion ◽  
Az91 Magnesium ◽  
Wear And Corrosion Resistance

Effect of Pulsed High Energy Ion Beam on Surface Modification of AZ91 Magnesium Alloy

2005 ◽  
Vol 488-489 ◽  
pp. 701-704
Author(s):  
Hui Zhao ◽  
Zhong Han ◽  
Zhen Liu
Keyword(s):  
Corrosion Resistance ◽  
Surface Modification ◽  
Magnesium Alloy ◽  
Ion Beam ◽  
High Energy ◽  
Az91 Magnesium Alloy ◽  
Wear And Corrosion ◽  
Az91 Magnesium ◽  
Beam Surface ◽  
Wear And Corrosion Resistance

This study is concerned with the effect of high energy ion beam irradiation on surface properties of AZ91 magnesium alloy. The study included a characterization of ion beam surface modification zone in terms of microstructure, and mechanical properties like nanohardness, wear, and corrosion resistance of the surface layer were studied in details. Nanohardness of the modification layer was improved about 2 times as that of the as-received AZ91. The corrosion resistance of the modified layer was significantly improved in NaCl solution because of refined grains. The wear resistance of the modification layer was also improved as compared to as-received AZ91.

scholarly journals Fabrication, Wear, and Corrosion Resistance of HVOF Sprayed WC-12Co on ZE41 Magnesium Alloy

Coatings ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 502 ◽  
Author(s):  
Sonia García-Rodríguez ◽  
Antonio Julio López ◽  
Victoria Bonache ◽  
Belén Torres ◽  
Joaquín Rams
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Thermal Spraying ◽  
Electrochemical Corrosion ◽  
High Energy ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance ◽  
Oxygen Fuel ◽  
Mass Increase ◽  
Temperature Melting

This study shows that WC-12Co coatings with low porosity and high wear and corrosion resistance can be applied by high velocity oxygen-fuel (HVOF) on a low melting and highly flammable ZE41 magnesium alloy. This provides a novel and promising use of the high-energy thermal spraying technique on low temperature melting substrates. The spraying distance used was 300 mm, which is between two and three times the recommended distanced for HVOF coating with WC-12Co on steels. Despite this, the WC-12Co coatings obtained were homogeneous, crack-free, and dense. The coatings were very well adhered to the substrates and the spraying distance allowed avoiding any thermal affectation of the substrate. The thickness of the coatings was limited to 45 μm to avoid a big mass increase in the samples. The effect of the number of layers, the O2/H2 ratio and the gas transport flow in the coating was studied. The coatings reduced the wear rate of the substrate by 104 times, making them wear resistant. Electrochemical corrosion tests were conducted to study the corrosion protection of the coatings, showing that it is possible to protect the magnesium substrate for 96 h in contact with 3.5 wt.% NaCl aqueous solution.

Effects of Erbium Addition on the Corrosion Resistance and Microstructure of AZ91 Magnesium Alloy

2011 ◽  
Vol 194-196 ◽  
pp. 1221-1224 ◽  
Author(s):  
Zhong Jun Wang ◽  
Yang Xu ◽  
Jing Zhu
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Magnesium Alloys ◽  
Discontinuous Precipitation ◽  
Az91 Magnesium Alloy ◽  
Continuous Precipitation ◽  
Az91 Magnesium ◽  
Precipitation Phase

The microstructures and corrosion resistance of AZ91 and AZ91+0.5 wt.% erbium (Er) magnesium alloys were studied, respectively. The results show that the Er addition in scrap AZ91 magnesium alloy can improve the corrosion resistance, markedly. The discontinuous precipitation phase (DPP) for Mg17Al12was retarded and the amount of DPP was decreased by 41% due to the formation of Al8ErMn4phase during solidification. The amount of continuous precipitation phase (CPP) in grains was decreased by 8% because of the formation of Al7ErMn5phase during solidification.

Corrosion and Protection of Magnesium Alloys

2015 ◽  
Vol 1120-1121 ◽  
pp. 1078-1082 ◽  
Author(s):  
Yang Yang Lv ◽  
Ling Feng Zhang
Keyword(s):  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Magnesium Alloys ◽  
Automotive Industry ◽  
Physical And Mechanical Properties ◽  
Current Status ◽  
Strain Rates ◽  
Metallic Materials ◽  
Az91 Magnesium Alloy ◽  
Az91 Magnesium

Magnesium alloy as a green material in the 21st century, because of its excellent physical and mechanical properties of metallic materials as an ideal in the automotive industry, electronic industry and aviation, aerospace and other industries[1]. However, poor corrosion resistance of magnesium alloys become an important issue hinder application of magnesium alloys[2]. So magnesium alloy corrosion problems and the current status of research paper reviews several magnesium alloy protection methods at home and abroad, and also highlighted with our latest laser shock (LSP) study of AZ91 magnesium alloy at high strain rates of corrosion resistance results.

Ceria Coatings Prepared by Sol-Gel Approach on AZ91 Magnesium Alloy

2017 ◽  
Vol 898 ◽  
pp. 1369-1380 ◽  
Author(s):  
Hui Min Han ◽  
Dan Tong Wang ◽  
Hua Qian Yu ◽  
Min Zuo ◽  
Li Hong Wang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Sol Gel ◽  
Electrochemical Corrosion ◽  
Chemical Conversion ◽  
Corrosion Current ◽  
Az91 Alloy ◽  
Az91 Magnesium Alloy ◽  
Az91 Magnesium

The ceria coatings on AZ91 substrates were successfully synthesized by chemical conversion and the corrosion resistance of AZ91 samples with and without ceria coatings were evaluated by means of electrochemical corrosion in 3.5 wt.% NaCl solution. According to the parameters derived from the polarization date, the Icorr (the corrosion current density) values of the coated samples are smaller than that of bare one, indicating that the corrosion resistance of AZ91 alloys has been improved to some extent. The influence of fluoridated pretreatment, inter-layer heat treatment, sintering temperature and the layer of films on the performance of ceria coatings were also investigated. It was found that the inter-layer heat treatment has no influence on improving the anticorrosion resistance of AZ91 alloy. In comparison with the bare one, the Icorr of optimal sample is about 0.0219mA/cm2, which decreases by two orders of magnitude, indicating that the ceria coatings could significantly improve the corrosion resistance of AZ91 magnesium alloy.

Corrosion Resistance of RE-AZ91 Magnesium Alloys

2014 ◽  
Vol 933 ◽  
pp. 66-70
Author(s):  
Jun Jie Yang ◽  
Yao Li ◽  
Ping Xue
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Mg Alloy ◽  
Constant Voltage ◽  
High Tensile Strength ◽  
Az91 Magnesium Alloy ◽  
Az91 Magnesium ◽  
Good Heat Resistance ◽  
Good Heat

Rare Earth (RE) were added to industrial AZ91 magnesium alloy, so that RE-AZ91 Mg alloy was produced by the process of die casting, so as to study the effect of RE on corrosion resistance and tensile strength of Mg alloy. The experiment results show that RE addition could improve the tensile strength and corrosion resistance of magnesium alloy at a certain amount of RE. RE-AZ91 had a good heat resistance, corrosion resistance at a high temperature or in the environment applied constant voltage, with a high tensile strength.

Sign in / Sign up

Export Citation Format

Share Document