Economic utility of 3D remote sensing data for estimation of site index in Nordic commercial forest inventories: a comparison of airborne laser scanning, digital aerial photogrammetry and conventional practices

2020 ◽  
Vol 36 (1) ◽  
pp. 55-67
Author(s):  
Lennart Noordermeer ◽  
Terje Gobakken ◽  
Erik Næsset ◽  
Ole Martin Bollandsås
2020 ◽  
Vol 77 (4) ◽  
Author(s):  
Ranjith Gopalakrishnan ◽  
Petteri Packalen ◽  
Veli-Pekka Ikonen ◽  
Janne Räty ◽  
Ari Venäläinen ◽  
...  

Abstract Key message The potential of airborne laser scanning (ALS) and multispectral remote sensing data to aid in generating improved wind damage risk maps over large forested areas is demonstrated. This article outlines a framework to generate such maps, primarily utilizing the horizontal structural information contained in the ALS data. Validation was done over an area in Eastern Finland that had experienced sporadic wind damage. Context Wind is the most prominent disturbance element for Finnish forests. Hence, tools are needed to generate wind damage risk maps for large forested areas, and their possible changes under planned silvicultural operations. Aims (1) How effective are ALS-based forest variables (e.g. distance to upwind forest stand edge, gap size) for identifying high wind damage risk areas? (2) Can robust estimates of predicted critical wind speeds for uprooting of trees be derived from these variables? (3) Can these critical wind speed estimates be improved using wind multipliers, which factor in topography and terrain roughness effects? Methods We first outline a framework to generate several wind damage risk–related parameters from remote sensing data (ALS + multispectral). Then, we assess if such parameters have predictive power. That is, whether they help differentiate between damaged and background points. This verification exercise used 42 wind damaged points spread over a large area. Results Parameters derived from remote sensing data are shown to have predictive power. Risk models based on critical wind speeds are not that robust, but show potential for improvement. Conclusion Overall, this work described a framework to get several wind risk–related parameters from remote sensing data. These parameters are shown to have potential in generating wind damage risk maps over large forested areas.


2021 ◽  
Vol 13 (8) ◽  
pp. 1504
Author(s):  
Sylwia Szporak-Wasilewska ◽  
Hubert Piórkowski ◽  
Wojciech Ciężkowski ◽  
Filip Jarzombkowski ◽  
Łukasz Sławik ◽  
...  

The aim of this study is to evaluate the effectiveness of the identification of Natura 2000 wetland habitats (Alkaline fens—code 7230, and Transition mires and quaking bogs—code 7140) depending on various remotely sensed (RS) data acquired from an airborne platform. Both remote sensing data and botanical reference data were gathered for mentioned habitats in the Lower (LB) and Upper Biebrza (UB) River Valley and the Janowskie Forest (JF) in different seasonal stages. Several different classification scenarios were tested, and the ones that gave the best results for analyzed habitats were indicated in each campaign. In the final stage, a recommended term of data acquisition, as well as a list of remote sensing products, which allowed us to achieve the highest accuracy mapping for these two types of wetland habitats, were presented. Designed classification scenarios integrated different hyperspectral products such as Minimum Noise Fraction (MNF) bands, spectral indices and products derived from Airborne Laser Scanning (ALS) data representing topography (developed in SAGA), or statistical products (developed in OPALS—Orientation and Processing of Airborne Laser Scanning). The image classifications were performed using a Random Forest (RF) algorithm and a multi-classification approach. As part of the research, the correlation analysis of the developed remote sensing products was carried out, and the Recursive Feature Elimination with Cross-Validation (RFE-CV) analysis was performed to select the most important RS sub-products and thus increase the efficiency and accuracy of developing the final habitat distribution maps. The classification results showed that alkaline fens are better identified in summer (mean F1-SCORE equals 0.950 in the UB area, and 0.935 in the LB area), transition mires and quaking bogs that evolved on/or in the vicinity of alkaline fens in summer and autumn (mean F1-SCORE equals 0.931 in summer, and 0.923 in autumn in the UB area), and transition mires and quaking bogs that evolved on dystrophic lakes in spring and summer (mean F1-SCORE equals 0.953 in spring, and 0.948 in summer in the JF area). The study also points out that the classification accuracy of both wetland habitats is highly improved when combining selected hyperspectral products (MNF bands, spectral indices) with ALS topographical and statistical products. This article demonstrates that information provided by the synergetic use of data from different sensors can be used in mapping and monitoring both Natura 2000 wetland habitats for its future functional assessment and/or protection activities planning with high accuracy.


2021 ◽  
Vol 13 (4) ◽  
pp. 1917
Author(s):  
Alma Elizabeth Thuestad ◽  
Ole Risbøl ◽  
Jan Ingolf Kleppe ◽  
Stine Barlindhaug ◽  
Elin Rose Myrvoll

What can remote sensing contribute to archaeological surveying in subarctic and arctic landscapes? The pros and cons of remote sensing data vary as do areas of utilization and methodological approaches. We assessed the applicability of remote sensing for archaeological surveying of northern landscapes using airborne laser scanning (LiDAR) and satellite and aerial images to map archaeological features as a basis for (a) assessing the pros and cons of the different approaches and (b) assessing the potential detection rate of remote sensing. Interpretation of images and a LiDAR-based bare-earth digital terrain model (DTM) was based on visual analyses aided by processing and visualizing techniques. 368 features were identified in the aerial images, 437 in the satellite images and 1186 in the DTM. LiDAR yielded the better result, especially for hunting pits. Image data proved suitable for dwellings and settlement sites. Feature characteristics proved a key factor for detectability, both in LiDAR and image data. This study has shown that LiDAR and remote sensing image data are highly applicable for archaeological surveying in northern landscapes. It showed that a multi-sensor approach contributes to high detection rates. Our results have improved the inventory of archaeological sites in a non-destructive and minimally invasive manner.


2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Johannes Schumacher ◽  
Marius Hauglin ◽  
Rasmus Astrup ◽  
Johannes Breidenbach

Abstract Background The age of forest stands is critical information for forest management and conservation, for example for growth modelling, timing of management activities and harvesting, or decisions about protection areas. However, area-wide information about forest stand age often does not exist. In this study, we developed regression models for large-scale area-wide prediction of age in Norwegian forests. For model development we used more than 4800 plots of the Norwegian National Forest Inventory (NFI) distributed over Norway between latitudes 58° and 65° N in an 18.2 Mha study area. Predictor variables were based on airborne laser scanning (ALS), Sentinel-2, and existing public map data. We performed model validation on an independent data set consisting of 63 spruce stands with known age. Results The best modelling strategy was to fit independent linear regression models to each observed site index (SI) level and using a SI prediction map in the application of the models. The most important predictor variable was an upper percentile of the ALS heights, and root mean squared errors (RMSEs) ranged between 3 and 31 years (6% to 26%) for SI-specific models, and 21 years (25%) on average. Mean deviance (MD) ranged between − 1 and 3 years. The models improved with increasing SI and the RMSEs were largest for low SI stands older than 100 years. Using a mapped SI, which is required for practical applications, RMSE and MD on plot level ranged from 19 to 56 years (29% to 53%), and 5 to 37 years (5% to 31%), respectively. For the validation stands, the RMSE and MD were 12 (22%) and 2 years (3%), respectively. Conclusions Tree height estimated from airborne laser scanning and predicted site index were the most important variables in the models describing age. Overall, we obtained good results, especially for stands with high SI. The models could be considered for practical applications, although we see considerable potential for improvements if better SI maps were available.


2021 ◽  
pp. 144-149
Author(s):  
G. G. Bickbulatova ◽  
E. N. Kupreeva

There are various programs for processing geodetic measurement and remote sensing data. This article discusses the use of Cyclone software for building a digital model of a construction pit surface based on a point cloud based on laser scanning and calculating the volume of earthworks.


2019 ◽  
Vol 31 (1) ◽  
pp. 105-133
Author(s):  
Zdzisław Kurczyński

Abstract The article is a retrospective analysis of the development of airborne laser scanning technology in the country in the past twenty years, i.e. from the beginnings of this technique use in Poland to the present day. The emphasis in the text is placed on development trends and scientific and application problems in the field of technology undertaken by national research centres. The review is based on numerous publications in this field, which have been released over two decades mainly in the “Archive of Photogrammetry, Cartography and Remote Sensing”. Therefore, the article is a presentation of the progress in the area of airborne laser scanning through an attempt to systematize and review national publications in this scope. It also presents the development of the national production potential and the level of the country’s coverage with data and products derived from airborne laser scanning.


2020 ◽  
Vol 12 (11) ◽  
pp. 1808 ◽  
Author(s):  
Miłosz Mielcarek ◽  
Agnieszka Kamińska ◽  
Krzysztof Stereńczak

The rapid developments in the field of digital aerial photogrammetry (DAP) in recent years have increased interest in the application of DAP data for extracting three-dimensional (3D) models of forest canopies. This technology, however, still requires further investigation to confirm its reliability in estimating forest attributes in complex forest conditions. The main purpose of this study was to evaluate the accuracy of tree height estimation based on a crown height model (CHM) generated from the difference between a DAP-derived digital surface model (DSM) and an airborne laser scanning (ALS)-derived digital terrain model (DTM). The tree heights determined based on the DAP-CHM were compared with ground-based measurements and heights obtained using ALS data only (ALS-CHM). Moreover, tree- and stand-related factors were examined to evaluate the potential influence on the obtained discrepancies between ALS- and DAP-derived heights. The obtained results indicate that the differences between the means of field-measured heights and DAP-derived heights were statistically significant. The root mean square error (RMSE) calculated in the comparison of field heights and DAP-derived heights was 1.68 m (7.34%). The results obtained for the CHM generated using only ALS data produced slightly lower errors, with RMSE = 1.25 m (5.46%) on average. Both ALS and DAP displayed the tendency to underestimate tree heights compared to those measured in the field; however, DAP produced a higher bias (1.26 m) than ALS (0.88 m). Nevertheless, DAP heights were highly correlated with the heights measured in the field (R2 = 0.95) and ALS-derived heights (R2 = 0.97). Tree species and height difference (the difference between the reference tree height and mean tree height in a sample plot) had the greatest influence on the differences between ALS- and DAP-derived heights. Our study confirms that a CHM computed based on the difference between a DAP-derived DSM and an ALS-derived DTM can be successfully used to measure the height of trees in the upper canopy layer.


2005 ◽  
Vol 42 ◽  
pp. 195-201 ◽  
Author(s):  
Thomas Geist ◽  
Hallgeir Elvehøy ◽  
Miriam Jackson ◽  
Johann Stötter

AbstractKey issues of glacier monitoring are changes in glacier geometry and glacier mass. As accurate direct measurements are costly and time-consuming, the use of various remote-sensing data for glacier monitoring is explored. One technology used and described here is airborne laser scanning. The method enables the derivation of high-quality digital elevation models (DEMs) with a vertical and horizontal accuracy in the sub-metre range. Between September 2001 and August 2002, three laser scanner data acquisition flights were carried out, covering the whole area of Engabreen, Norway, and corresponding well to the measurement dates for the mass-balance year 2001/02. The data quality of the DEMs is assessed (e.g. by comparing the values with a control area which has been surveyed independently or GPS ground profiles measured during the flights). For the whole glacier, surface elevation change and consequently volume change is calculated, quantified and compared with traditional mass-balance data for the same time interval. For the winter term, emergence/submergence velocity is determined from laser scanner data and snow-depth data and is compared with velocity measurements at stakes. The investigations reveal the high potential of airborne laser scanning for measuring the extent and the topography of glaciers as well as changes in geometry (Δarea, Δvolume).


Sign in / Sign up

Export Citation Format

Share Document