Synthesis of nanoadsorbent entailed mesoporous organosilica for decontamination of methylene blue and methyl orange from water

2021 ◽  
pp. 1-14
Author(s):  
Khurram Shahzad ◽  
Muhammad Altaf Nazir ◽  
Muhammad Jamshaid ◽  
Ome Parkash Kumar ◽  
Tayyaba Najam ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Methyl Orange ◽  
Mesoporous Organosilica

scholarly journals Sulfobetaine Cryogels for Preferential Adsorption of Methyl Orange from Mixed Dye Solutions

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 208
Author(s):  
Ramona B. J. Ihlenburg ◽  
Anne-Catherine Lehnen ◽  
Joachim Koetz ◽  
Andreas Taubert
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Methyl Orange ◽  
Dye Removal ◽  
Selective Adsorption ◽  
Water Soluble ◽  
Organic Substances ◽  
Preferential Adsorption ◽  
Dimethyl Ammonium ◽  
Dye Solutions

New cryogels for selective dye removal from aqueous solution were prepared by free radical polymerization from the highly water-soluble crosslinker N,N,N’,N’-tetramethyl-N,N’-bis(2-ethylmethacrylate)-propyl-1,3-diammonium dibromide and the sulfobetaine monomer 2-(N-3-sulfopropyl-N,N-dimethyl ammonium)ethyl methacrylate. The resulting white and opaque cryogels have micrometer sized pores with a smaller substructure. They adsorb methyl orange (MO) but not methylene blue (MB) from aqueous solution. Mixtures of MO and MB can be separated through selective adsorption of the MO to the cryogels while the MB remains in solution. The resulting cryogels are thus candidates for the removal of hazardous organic substances, as exemplified by MO and MB, from water. Clearly, it is possible that the cryogels are also potentially interesting for removal of other compounds such as pharmaceuticals or pesticides, but this must be investigated further.

scholarly journals Straightforward Synthesis of Mn3O4/ZnO/Eu2O3-Based Ternary Heterostructure Nano-Photocatalyst and Its Application for the Photodegradation of Methyl Orange and Methylene Blue Dyes

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4661
Author(s):  
Jayachamarajapura Pranesh Shubha ◽  
Haralahalli Shivappa Savitha ◽  
Syed Farooq Adil ◽  
Mujeeb Khan ◽  
Mohammad Rafe Hatshan ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Methyl Orange ◽  
Irradiation Time ◽  
Solar Irradiation ◽  
Anionic Dyes ◽  
One Pot ◽  
Sunlight Irradiation ◽  
Ft Ir ◽  
Degradation Activity ◽  
Ecological Applications

Zinc oxide-ternary heterostructure Mn3O4/ZnO/Eu2O3 nanocomposites were successfully prepared via waste curd as fuel by a facile one-pot combustion procedure. The fabricated heterostructures were characterized utilizing XRD, UV–Visible, FT-IR, FE-SEM, HRTEM and EDX analysis. The photocatalytic degradation efficacy of the synthesized ternary nanocomposite was evaluated utilizing model organic pollutants of methylene blue (MB) and methyl orange (MO) in water as examples of cationic dyes and anionic dyes, respectively, under natural solar irradiation. The effect of various experimental factors, viz. the effect of a light source, catalyst dosage, irradiation time, pH of dye solution and dye concentration on the photodegradation activity, was systematically studied. The ternary Mn3O4/ZnO/Eu2O3 photocatalyst exhibited excellent MB and MO degradation activity of 98% and 96%, respectively, at 150 min under natural sunlight irradiation. Experiments further conclude that the fabricated nanocomposite exhibits pH-dependent photocatalytic efficacy, and for best results, concentrations of dye and catalysts have to be maintained in a specific range. The prepared photocatalysts are exemplary and could be employed for wastewater handling and several ecological applications.

scholarly journals Zirconium-Doped Chromium IV Oxide Nanocomposites: Synthesis, Characterization, and Photocatalysis towards the Degradation of Organic Dyes

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 117
Author(s):  
Zahir Muhammad ◽  
Farman Ali ◽  
Muhammad Sajjad ◽  
Nisar Ali ◽  
Muhammad Bilal ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Solid State ◽  
Room Temperature ◽  
Organic Dyes ◽  
Uv Light ◽  
Heterogeneous Photocatalysis ◽  
Ft Ir ◽  
Complete Mineralization

Degradation of organic dyes and their byproducts by heterogeneous photocatalysts is an essential process, as these dyes can be potentially discharged in wastewater and threaten aquatic and xerophyte life. Therefore, their complete mineralization into nontoxic components (water and salt) is necessary through the process of heterogeneous photocatalysis. In this study, Zr/CrO2 (Zirconium-doped chromium IV oxide) nanocomposite-based photocatalysts with different compositions (1, 3, 5, 7 & 9 wt.%) were prepared by an environmentally friendly, solid-state reaction at room temperature. The as-prepared samples were calcined under air at 450 °C in a furnace for a specific period of time. The synthesis of Zr/CrO2 photocatalysts was confirmed by various techniques, including XRD, SEM, EDX, FT-IR, UV-Vis, and BET. The photocatalytic properties of all samples were tested towards the degradation of methylene blue and methyl orange organic dyes under UV light. The results revealed a concentration-dependent photocatalytic activity of photocatalysts, which increased the amount of dopant (up to 5 wt.%). However, the degradation efficiency of the catalysts decreased upon further increasing the amount of dopant due to the recombination of holes and photoexcited electrons.

scholarly journals Study of photocatalytic activity of TiO2 fluorinated by thermal shock method for the degradation of different dyes

2015 ◽  
Vol 18 (2) ◽  
pp. 121-131
Author(s):  
Khoa Tien Le ◽  
Ngoc Chau Hoang ◽  
Tien Thuy Thai ◽  
Anh Trung Le ◽  
Thinh Nguyen Huu Pham ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Thermal Shock ◽  
Photocatalytic Oxidation ◽  
Organic Dyes ◽  
Cationic Dye ◽  
Solution Ph ◽  
Ph Values ◽  
Methylene Blue Cationic Dye

TiO2 P25 was fluorinated by thermal shock method in order to study the influence of thermal shock fluorination on the surface properties and the photocatalytic activity for the degradation of cationic and anionic organic dyes at different pH values. The surface charge of catalysts was characterized by the pHPZC measurement. The photocatalytic activity of catalysts was evaluated via the degradation of methylene blue (cationic dye) and methyl orange (anionic dye). The results showed that the thermal shock fluorination and the rise of solution pH can increase the surface negative charge of TiO2, which enhanced the adsorption of methylene blue and then improved the photocatalytic degradation of this cationic dye under UV and visible light. On the other hand, after the fluorination, the adsorption of methyl orange on TiO2 was strongly reduced, which limited the photocatalytic oxidation of this anion dye.

scholarly journals Photocatalytic Degradation of Methylene Blue and Methyl Orange by Y-PTC Metal-Organic Framework

2021 ◽  
Vol 7 (2) ◽  
pp. 129-141
Author(s):  
Adawiah Adawiah ◽  
Muhammad Derry Luthfi Yudhi ◽  
Agustino Zulys
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Metal Organic Framework ◽  
Light Irradiation ◽  
Bandgap Energy ◽  
Metal Organic ◽  
Organic Framework

The yttrium based metal-organic framework (MOF) Y-PTC was synthesized by the solvothermal method using perylene as the linker and yttrium as metal ion. This study aims to assess the photocatalytic activity of yttrium-perylenetetracarboxylate (Y-PTC) metal-organic framework (MOF) toward methylene blue and methyl orange under visible light irradiation. The results of the FTIR analysis showed that Y-PTC MOF had a different structure and composition from its precursor (Na4PTC). The Y-PTC MOF has a bandgap energy value of 2.20 eV with a surface area of 47.7487 m2/g. The SEM-EDS analysis showed an elemental composition of yttrium, carbon, and oxygen, were 6.9%, 72.1% and 20.7%, respectively. Furthermore, Y-PTC MOF was able to adsorb dyes at the optimum by 78.10% and 35.57% toward methylene blue (MB) and methyl orange (MO) at the dispersion period of 60 mins. Y-PTC MOF exhibited photocatalytic activity towards the degradation of methylene blue and methyl orange under visible light irradiation. The addition of H2O2 inhibited Y-PTC photocatalytic activity towards MO degradation from 50.89% to 26.38%. In contrast to MO, the addition of H2O2 had a positive effect on MB, which increased the degradation from 87.56% to 91.65%. Therefore, Y-PTC MOF possessed the potential of a photocatalyst material in dyes degradation under visible light irradiation.

scholarly journals Bioremediation of organic dyes using combination of plants ash

2019 ◽  
Vol 7 (2) ◽  
pp. 240-246
Author(s):  
Kaur Harpreet ◽  
Kaur Harpreet ◽  
Vandana Kamboj ◽  
Vandana Kamboj
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Methyl Orange ◽  
Crystal Violet ◽  
Congo Red ◽  
Organic Dyes ◽  
Low Cost ◽  
Sem Image ◽  
Orange Peels

Water is the most crucial thing to mankind and so its contamination by various agencies is posing a threat to the natural balance. So, in the present work, the efficiency of various adsorbents derived from plant waste, to remove different dyes from aqueous solution was evaluated. Parameters for study were contact time, concentration and pH. Various combinations of plant ashes were used for the study. It was found that adsorbent prepared from the combination of orange peels, pomegranate and banana peels ashes, exhibited good adsorption capacity for methylene blue, congo red and crystal violet. All these dyes were completely removed from the aqueous solution while methyl orange was not removed. Congo red was removed completely within 40 min of contact with the adsorbent while methyl orange took 3 hrs to be removed to the extent of 48% only. The adsorption coefficient of congo red was found to be 2.33 while value for methylene blue and crystal violet was 1 and 1.66 respectively. The characterization of adsorbent was done by Scanning Electron Microscopy and IR spectroscopy. SEM image revealed the surface of adsorbent to be made of differential pores. From the results it became evident that the low-cost adsorbent could be used as a replacement for costly traditional methods of removing colorants from water.

scholarly journals Synthesis of Polyaniline coated Graphene Oxide @ SrTiO3 Nanocube Nanocomposites for Enhanced Removal of Carcinogenic Dyes from Aqueous Solution

2016 ◽  
Author(s):  
Syed Shahabuddin ◽  
Norazilawati Muhamad Sarih ◽  
Muhammad Afzal Kamboh ◽  
Hamid Rashidi Nodeh ◽  
Sharifah Mohamad
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Methyl Orange ◽  
Oxidative Polymerization ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Polymerization Method

The present investigation highlights the synthesis of polyaniline (PANI) coated graphene oxide doped with SrTiO3 nanocube nanocomposites through facile in-situ oxidative polymerization method for the efficient removal of carcinogenic dyes, namely, the cationic dye methylene blue (MB) and the anionic dye methyl orange (MO). The synthesised nanocomposites were characterised by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The adsorption efficiencies of graphene oxide (GO), PANI homopolymer and SrTiO3 nanocubes-doped nanocomposites were assessed by monitoring the adsorption of methylene blue and methyl orange dyes from aqueous solution. The adsorption efficiency of nanocomposites doped with SrTiO3 nanocubes were found to be of higher magnitude as compared with undoped nanocomposite. Moreover, the nanocomposite with 2 wt% SrTiO3 with respect to graphene oxide demonstrated excellent adsorption behaviour with 99% and 91% removal of MB and MO respectively, in a very short duration of time.

Sign in / Sign up

Export Citation Format

Share Document