Synthesis of NIR-Reflective Oxide Ceramic Orange Pigment from MgO and Leucoxene

2021 ◽  
Vol 222 (1) ◽  
pp. 283-292
Author(s):  
Nuchjarin Sangwong ◽  
Mantana Suwan ◽  
Sitthisuntorn Supothina
Keyword(s):  
2021 ◽  
pp. 1-10
Author(s):  
Vishal Raval ◽  
Shiming Luo ◽  
Emily C. Zabor ◽  
Arun D. Singh

<b><i>Purpose:</i></b> The aim of the study was to evaluate equivalence of growth rate and pathologic confirmation in small choroidal melanoma (SCM). <b><i>Design:</i></b> This study is a case series. <b><i>Subjects, Participants, and Controls:</i></b> A total of 61 patients with a choroidal melanocytic tumor of size 5.0–16.0 mm in the largest basal diameter and 1.0–2.5 mm in thickness were classified into the pathology-confirmed group (<i>n</i> = 19), growth-confirmed group (<i>n</i> = 30), and with combined observations (<i>n</i> = 12). <b><i>Methods:</i></b> Distribution of clinical variables (age, gender, laterality, tumor dimensions, tumor location, and presence of orange pigment, subretinal fluid, drusen, and retinal pigment epithelial [RPE] atrophy) between the groups was analyzed. Patient and disease characteristics were summarized as the median and interquartile range for continuous variables and the frequency and percentage for categorical variables. Comparisons were made using the Wilcoxon rank sum test for continuous variables and either Fisher’s exact test or the χ<sup>2</sup> test for categorical variables with a <i>p</i> value threshold of 0.05 for statistical significance. Growth rate (change in basal dimension/12 months) diagnostic of SCM was quantified. <b><i>Main Outcome Measures:</i></b> The primary aim of this study was to test the hypothesis that “growth” was diagnostic of SCM with the secondary aim of quantifying the malignant “growth rate” (growth rate of SCM). <b><i>Results:</i></b> The clinical characteristics among all 3 groups were similar except more patients with symptoms (68 vs. 20 vs. 42%, <i>p</i> = 0.004) and juxtapapillary location (<i>p</i> = 0.03) were in the pathology group than in the growth-confirmed group. Those in the combined and growth-confirmed groups had more patients with drusen (11 vs. 60 vs. 50%, <i>p</i> = 0.003) and RPE atrophy (11 vs. 23 vs. 67%, <i>p</i> = 0.003), respectively, than in the pathology group. The median time to detect growth was 9 months (range 3–26 months). The mean growth rate in basal dimension was 1.8 mm/12 months (range, 0.0–7.4 mm; [95% CI: 1.32–2.28]). <b><i>Conclusions and Relevance:</i></b> Choroidal melanocytic lesions exhibiting a defined growth rate can be clinically diagnosed as SCM without a need for biopsy.


2000 ◽  
Vol 6 (S2) ◽  
pp. 944-945
Author(s):  
P. M. Adams ◽  
C. T. Hoskinson ◽  
R. Witt

A group of mixed oxide ceramic capacitors used in several electronic systems recently failed as a result of voltage breakdown in the specified test ranges. These capacitors consist predominantly of mixed oxides of magnesium, titanium, silicon and aluminum (with minor amounts of strontium and calcium) and contain palladium mesh electrodes. Preliminary results suggest that phase transformations have occurred in some lots of capacitors that have been over-fired as a result of a manufacturing change. Several years’ production of capacitors has potentially been affected. The formation of a phase with inferior dielectric properties, and which can exhibit semiconducting properties (P/N junction), probably resulted in the failure of the capacitors. This new phase is typically rich in strontium and is only present at levels of several volume percent. The low concentration of this phase has made its identification difficult. If this new phase could be identified it might be possible to determine/establish if its dielectric properties are consistent with the proposed failure mechanism.


2013 ◽  
Vol 48 (5) ◽  
pp. 636-641 ◽  
Author(s):  
V. І. Pokhmurs’kyi ◽  
V. М. Dovhunyk ◽  
М. М. Student ◽  
M. D. Klapkiv ◽  
V. М. Posuvailo ◽  
...  

1995 ◽  
Vol 117 (4) ◽  
pp. 622-628 ◽  
Author(s):  
Shingo Obara ◽  
Takahisa Kato

The worn surface profile of a composite structure was experimentally and numerically investigated focusing on the effects of sliding conditions. Wear tests on composites made of an oxide ceramic and an amorphous metal against a tetragonal zirconia polycrystals-alumina were carried out under various mean contact pressures, P, and sliding velocities, V. The test results showed that the worn surface profiles of the composites changed with the PV value. A new numerical method for simulating the worn surface profile of a composite structure has been developed. The present method is based upon the assumption that the profile of a worn surface is changed by thermal distortion of the sliding bodies due to frictional heating and by elastic deformation due to normal pressure and friction traction. The calculated results were compared with the test results, and the comparison showed that the elastic deformation plays an important role in forming the worn surface profile and that the effect of thermal distortion becomes remarkable with an increase in PV values. The numerical results clarified the contribution of the thermal distortion to the change in the worn surface profile of the composite.


Author(s):  
G. Barbezat ◽  
K. Landes

Abstract As a new plasma gun technology the TRIPLEX system has been introduced in the industrial field two years ago. The core of the TRIPLEX technology is a plasma gun with three cathodes and a long cascaded nozzle consisting of several insulated rings. Only the last ring with a relatively long distance to the cathode is operated as anode. Because of the equal and constant lengths of the three independent arcs, stretching from the three cathodes to the common anode, a stationary plasma jet is generated. Compared to conventional torches, the improved stability of the plasma jet allows a more uniform powder treatment and a higher deposition efficiency as well as the powder feed rate can be increased using a triple injection system. A significantly longer life time of the electrodes reduces the cost for quality control in the coating process. The characteristic properties of oxide ceramic coatings are improved in comparison with the coatings produced by conventional plasma torches. The results of two years industrial application of the innovative torch system TRIPLEX are presented in the paper.


Sign in / Sign up

Export Citation Format

Share Document