Shear wave propagation in vertically heterogeneous viscoelastic layer over a micropolar elastic half-space

2016 ◽  
Vol 24 (2) ◽  
pp. 149-156 ◽  
Author(s):  
Tanupreet Kaur ◽  
Satish Kumar Sharma ◽  
Abhishek Kumar Singh
1971 ◽  
Vol 38 (4) ◽  
pp. 899-905 ◽  
Author(s):  
L. B. Freund

Three-dimensional wave propagation in an elastic half space is considered. The half space is traction free on half its boundary, while the remaining part of the boundary is free of shear traction and is constrained against normal displacement by a smooth, rigid barrier. A time-harmonic surface wave, traveling on the traction free part of the surface, is obliquely incident on the edge of the barrier. The amplitude and the phase of the resulting reflected surface wave are determined by means of Laplace transform methods and the Wiener-Hopf technique. Wave propagation in an elastic half space in contact with two rigid, smooth barriers is then considered. The barriers are arranged so that a strip on the surface of uniform width is traction free, which forms a wave guide for surface waves. Results of the surface wave reflection problem are then used to geometrically construct dispersion relations for the propagation of unattenuated guided surface waves in the guiding structure. The rate of decay of body wave disturbances, localized near the edges of the guide, is discussed.


1987 ◽  
Vol 54 (1) ◽  
pp. 121-126 ◽  
Author(s):  
R. Y. S. Pak

A method of potentials is presented for the derivation of the dynamic response of an elastic half-space to an arbitrary, time-harmonic, finite, buried source. The development includes a set of transformed stress-potential and displacement-potential relations which are apt to be useful in a variety of wave propagation problems. Specific results for an embedded source of uniform distributions are also included.


2000 ◽  
Vol 68 (2) ◽  
pp. 346-348 ◽  
Author(s):  
Hyun-Sil Kim ◽  
Jae-Seung Kim ◽  
Hyun-Ju Kang ◽  
Sang-Ryul Kim

Stress wave propagation in a coated elastic half-space due to water drop impact is studied by using the Cagniard-de Hoop method. The stresses have singularity at the Rayleigh wavefront whose location and singular behavior are determined from the pressure model and independent of the coating thickness, while reflected waves cause minor changes in amplitudes.


1988 ◽  
Vol 25 (2) ◽  
pp. 226-234
Author(s):  
L. J. Pascoe ◽  
F. Hron ◽  
P. F. Daley

The Alekseev–Mikhailenko method (AMM) is the name given to a series of algorithms that use one or more finite spatial transforms to reduce the dimensionality of a wave-propagation problem to that of one space dimension and time. This reduced equation is then solved using finite-difference techniques, and the space–time solution is recovered by applying inverse finite spatial transform(s). In this paper the elastodynamic wave equation that governs the coupled P–Sv motion in an isotropic, vertically inhomogeneous elastic half space is investigated using the AMM. Two types of impulsive body forces that may be used to excite the medium are examined, as is the problem of obtaining accurate transformed finite-difference analogues at the free surface. The second of these is accomplished by introducing the boundary conditions that the shear and normal stress must vanish here and by incorporating their transforms into the transformed elastodynamic equations. The stability criterion for the explicit finite-difference method is given cursory treatment, as detailed discussion of this aspect may be found in many texts that deal with the subject of finite differences.A coal-seam model (two thin, low-velocity layers embedded in a half space) illustrates the method. Both horizontal and vertical seismic traces are computed for this model and the results examined in relation to other seismic-modelling techniques.


2020 ◽  
Vol 37 (9) ◽  
pp. 3345-3359
Author(s):  
Sindhuja Ala ◽  
Rajitha Gurijala ◽  
Malla Reddy Perati

Purpose The purpose of this paper is to investigate the effect of reinforcement, inhomogeneity and initial stress on the propagation of shear waves. The problem consists of magneto poroelastic medium sandwiched between self-reinforced medium and poroelastic half space. Using Biot’s theory of wave propagation, the frequency equation is obtained. Design/methodology/approach Shear wave propagation in magneto poroelastic medium embedded between a self-reinforced medium and poroelastic half space is investigated. This particular setup is quite possible in the Earth crust. All the three media are assumed to be inhomogeneous under initial stress. The significant effects of initial stress and inhomogeneity parameters of individual media have been studied. Findings Phase velocity is computed against wavenumber for various values of self-reinforcement, heterogeneity parameter and initial stress. Classical elasticity results are deduced as a particular case of the present study. Also in the absence of inhomogeneity and initial stress, frequency equation is discussed. Graphical representation is made to exhibit the results. Originality/value Shear wave propagation in magneto poroelastic medium embedded between a self-reinforced medium, and poroelastic half space are investigated in presence of initial stress, and inhomogeneity parameter. For heterogeneous poroelastic half space, the Whittaker’s solution is obtained. From the numerical results, it is observed that heterogeneity parameter, inhomogeneity parameter and reinforcement parameter have significant influences on the wave characteristics. In addition, frequency equation is discussed in absence of inhomogeneity and initial stress. For the validation purpose, numerical results are also computed for a particular case.


Sign in / Sign up

Export Citation Format

Share Document