scholarly journals Interactions of tensin with actin and identification of its three distinct actin-binding domains.

1994 ◽  
Vol 125 (5) ◽  
pp. 1067-1075 ◽  
Author(s):  
S H Lo ◽  
P A Janmey ◽  
J H Hartwig ◽  
L B Chen
Keyword(s):  
Amino Acids ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Sh2 Domain ◽  
Actin Binding ◽  
Molar Ratio ◽  
Actin Assembly ◽  
Binding Domains ◽  
Focal Contacts ◽  
End Capping

Tensin, a 200-kD phosphoprotein of focal contacts, contains sequence homologies to Src (SH2 domain), and several actin-binding proteins. These features suggest that tensin may link the cell membrane to the cytoskeleton and respond directly to tyrosine kinase signalling pathways. Here we identify three distinct actin-binding domains within tensin. Recombinant tensin purified after overexpression by a baculovirus system binds to actin filaments with Kd = 0.1 microM, cross-links actin filaments at a molar ratio of 1:10 (tensin/actin), and retards actin assembly by barbed end capping with Kd = 20 nM. Tensin fragments were constructed and expressed as fusion proteins to map domains having these activities. Three regions from tensin interact with actin: two regions composed of amino acids 1 to 263 and 263 to 463, cosediment with F-actin but do not alter the kinetics of actin assembly; a region composed of amino acids 888-989, with sequence homology to insertin, retards actin polymerization. A claw-shaped tensin dimer would have six potential actin-binding sites and could embrace the ends of two actin filaments at focal contacts.

scholarly journals The integral membrane protein, ponticulin, acts as a monomer in nucleating actin assembly.

1993 ◽  
Vol 120 (4) ◽  
pp. 909-922 ◽  
Author(s):  
C P Chia ◽  
A Shariff ◽  
S A Savage ◽  
E J Luna
Keyword(s):  
Membrane Protein ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Plasma Membranes ◽  
Specific Activity ◽  
Lipid Vesicles ◽  
Integral Membrane Protein ◽  
Actin Binding ◽  
Actin Assembly ◽  
Nucleation Activity

Ponticulin, an F-actin binding transmembrane glycoprotein in Dictyostelium plasma membranes, was isolated by detergent extraction from cytoskeletons and purified to homogeneity. Ponticulin is an abundant membrane protein, averaging approximately 10(6) copies/cell, with an estimated surface density of approximately 300 per microns2. Ponticulin solubilized in octylglucoside exhibited hydrodynamic properties consistent with a ponticulin monomer in a spherical or slightly ellipsoidal detergent micelle with a total molecular mass of 56 +/- 6 kD. Purified ponticulin nucleated actin polymerization when reconstituted into Dictyostelium lipid vesicles, but not when a number of commercially available lipids and lipid mixtures were substituted for the endogenous lipid. The specific activity was consistent with that expected for a protein comprising 0.7 +/- 0.4%, by mass, of the plasma membrane protein. Ponticulin in octylglucoside micelles bound F-actin but did not nucleate actin assembly. Thus, ponticulin-mediated nucleation activity was sensitive to the lipid environment, a result frequently observed with transmembrane proteins. At most concentrations of Dictyostelium lipid, nucleation activity increased linearly with increasing amounts of ponticulin, suggesting that the nucleating species is a ponticulin monomer. Consistent with previous observations of lateral interactions between actin filaments and Dictyostelium plasma membranes, both ends of ponticulin-nucleated actin filaments appeared to be free for monomer assembly and disassembly. Our results indicate that ponticulin is a major membrane protein in Dictyostelium and that, in the proper lipid matrix, it is sufficient for lateral nucleation of actin assembly. To date, ponticulin is the only integral membrane protein known to directly nucleate actin polymerization.

scholarly journals Actin-binding protein promotes the bipolar and perpendicular branching of actin filaments.

1980 ◽  
Vol 87 (3) ◽  
pp. 841-848 ◽  
Author(s):  
J H Hartwig ◽  
J Tyler ◽  
T P Stossel
Keyword(s):  
Actin Filaments ◽  
Actin Polymerization ◽  
Average Length ◽  
Binding Protein ◽  
Actin Binding ◽  
Branch Points ◽  
Heavy Meromyosin ◽  
Actin Binding Protein ◽  
Protein Dimers ◽  
Protein Molecules

Branching filaments with striking perpendicularity form when actin polymerizes in the presence of macrophage actin-binding protein. Actin-binding protein molecules are visible at the branch points. Compared with actin polymerized in the absence of actin-binding proteins, not only do the filaments branch but the average length of the actin filaments decreases from 3.2 to 0.63 micrometer. Arrowhead complexes formed by addition of heavy meromyosin molecules to the branching actin filaments point toward the branch points. Actin-binding protein also accelerates the onset of actin polymerization. All of these findings show that actin filaments assemble from nucleating sites on actin-binding protein dimers. A branching polymerization of actin filaments from a preexisting lattice of actin filaments joined by actin-binding protein molecules could generate expansion of cortical cytoplasm in amoeboid cells.

scholarly journals Mechanisms responsible for F-actin stabilization after lysis of polymorphonuclear leukocytes.

1992 ◽  
Vol 116 (5) ◽  
pp. 1123-1134 ◽  
Author(s):  
M L Cano ◽  
L Cassimeris ◽  
M Fechheimer ◽  
S H Zigmond
Keyword(s):  
Polymorphonuclear Leukocytes ◽  
Actin Polymerization ◽  
Cell Movement ◽  
Actin Binding ◽  
Cross Linking ◽  
Macromolecular Complex ◽  
Actin Depolymerization ◽  
Gravitational Forces ◽  
End Capping

While actin polymerization and depolymerization are both essential for cell movement, few studies have focused on actin depolymerization. In vivo, depolymerization can occur exceedingly rapidly and in a spatially defined manner: the F-actin in the lamellipodia depolymerizes in 30 s after chemoattractant removal (Cassimeris, L., H. McNeill, and S. H. Zigmond. 1990. J. Cell Biol. 110:1067-1075). To begin to understand the regulation of F-actin depolymerization, we have examined F-actin depolymerization in lysates of polymorphonuclear leukocytes (PMNs). Surprisingly, much of the cell F-actin, measured with a TRITC-phalloidin-binding assay, was stable after lysis in a physiological salt buffer (0.15 M KCl): approximately 50% of the F-actin did not depolymerize even after 18 h. This stable F-actin included lamellar F-actin which could still be visualized one hour after lysis by staining with TRITC-phalloidin and by EM. We investigated the basis for this stability. In lysates with cell concentrations greater than 10(7) cells/ml, sufficient globular actin (G-actin) was present to result in a net increase in F-actin. However, the F-actin stability was not solely because of the presence of free G-actin since addition of DNase I to the lysate did not increase the F-actin loss. Nor did it appear to be because of barbed end capping factors since cell lysates provided sites for barbed end polymerization of exogenous added actin. The stable F-actin existed in a macromolecular complex that pelleted at low gravitational forces. Increasing the salt concentration of the lysis buffer decreased the amount of F-actin that pelleted at low gravitational forces and increased the amount of F-actin that depolymerized. Various actin-binding and cross-linking proteins such as tropomyosin, alpha-actinin, and actin-binding protein pelleted with the stable F-actin. In addition, we found that alpha-actinin, a filament cross-linking protein, inhibited the rate of pyrenyl F-actin depolymerization. These results suggested that actin cross-linking proteins may contribute to the stability of cellular actin after lysis. The activity of crosslinkers may be regulated in vivo to allow rapid turnover of lamellipodia F-actin.

scholarly journals Coordinated regulation of platelet actin filament barbed ends by gelsolin and capping protein.

1996 ◽  
Vol 134 (2) ◽  
pp. 389-399 ◽  
Author(s):  
K Barkalow ◽  
W Witke ◽  
D J Kwiatkowski ◽  
J H Hartwig
Keyword(s):  
Actin Cytoskeleton ◽  
Actin Filament ◽  
Actin Polymerization ◽  
Residual Activity ◽  
Human Platelets ◽  
Actin Assembly ◽  
Capping Protein ◽  
Capping Proteins ◽  
End Capping ◽  
Human And Mouse

Exposure of cryptic actin filament fast growing ends (barbed ends) initiates actin polymerization in stimulated human and mouse platelets. Gelsolin amplifies platelet actin assembly by severing F-actin and increasing the number of barbed ends. Actin filaments in stimulated platelets from transgenic gelsolin-null mice elongate their actin without severing. F-actin barbed end capping activity persists in human platelet extracts, depleted of gelsolin, and the heterodimeric capping protein (CP) accounts for this residual activity. 35% of the approximately 5 microM CP is associated with the insoluble actin cytoskeleton of the resting platelet. Since resting platelets have an F-actin barbed end concentration of approximately 0.5 microM, sufficient CP is bound to cap these ends. CP is released from OG-permeabilized platelets by treatment with phosphatidylinositol 4,5-bisphosphate or through activation of the thrombin receptor. However, the fraction of CP bound to the actin cytoskeleton of thrombin-stimulated mouse and human platelets increases rapidly to approximately 60% within 30 s. In resting platelets from transgenic mice lacking gelsolin, which have 33% more F-actin than gelsolin-positive cells, there is a corresponding increase in the amount of CP associated with the resting cytoskeleton but no change with stimulation. These findings demonstrate an interaction between the two major F-actin barbed end capping proteins of the platelet: gelsolin-dependent severing produces barbed ends that are capped by CP. Phosphatidylinositol 4,5-bisphosphate release of gelsolin and CP from platelet cytoskeleton provides a mechanism for mediating barbed end exposure. After actin assembly, CP reassociates with the new actin cytoskeleton.

scholarly journals Sequence and domain organization of scruin, an actin-cross-linking protein in the acrosomal process of Limulus sperm.

1995 ◽  
Vol 128 (1) ◽  
pp. 51-60 ◽  
Author(s):  
M Way ◽  
M Sanders ◽  
C Garcia ◽  
J Sakai ◽  
P Matsudaira
Keyword(s):  
Amino Acid ◽  
Actin Filaments ◽  
Limited Proteolysis ◽  
Open Reading Frames ◽  
Actin Binding ◽  
Molar Ratio ◽  
Domain Organization ◽  
Ring Canals ◽  
Drosophila Protein ◽  
Reading Frames

The acrosomal process of Limulus sperm is an 80-microns long finger of membrane supported by a crystalline bundle of actin filaments. The filaments in this bundle are crosslinked by a 102-kD protein, scruin present in a 1:1 molar ratio with actin. Recent image reconstruction of scruin decorated actin filaments at 13-A resolution shows that scruin is organized into two equally sized domains bound to separate actin subunits in the same filament. We have cloned and sequenced the gene for scruin from a Limulus testes cDNA library. The deduced amino acid sequence of scruin reflects the domain organization of scruin: it consists of a tandem pair of homologous domains joined by a linker region. The domain organization of scruin is confirmed by limited proteolysis of the purified acrosomal process. Three different proteases cleave the native protein in a 5-kD Protease-sensitive region in the middle of the molecule to generate an NH2-terminal 47-kD and a COOH-terminal 56-kD protease-resistant domains. Although the protein sequence of scruin has no homology to any known actin-binding protein, it has similarities to several proteins, including four open reading frames of unknown function in poxviruses, as well as kelch, a Drosophila protein localized to actin-rich ring canals. All proteins that show homologies to scruin are characterized by the presence of an approximately 50-amino acid residue motif that is repeated between two and seven times. Crystallographic studies reveal this motif represents a four beta-stranded fold that is characteristic of the "superbarrel" structural fold found in the sialidase family of proteins. These results suggest that the two domains of scruin seen in EM reconstructions are superbarrel folds, and they present the possibility that other members of this family may also bind actin.

scholarly journals Three-dimensional structure of actin filaments and of an actin gel made with actin-binding protein.

1983 ◽  
Vol 96 (5) ◽  
pp. 1400-1413 ◽  
Author(s):  
R Niederman ◽  
P C Amrein ◽  
J Hartwig
Keyword(s):  
Actin Filaments ◽  
Binding Protein ◽  
Three Dimensional ◽  
Actin Binding ◽  
Dimensional Structure ◽  
Molar Ratio ◽  
Computer Assisted ◽  
Three Dimensional Structure ◽  
Actin Binding Protein ◽  
Critical Point Drying

Purified muscle actin and mixtures of actin and actin-binding protein were examined in the transmission electron microscope after fixation, critical point drying, and rotary shadowing. The three-dimensional structure of the protein assemblies was analyzed by a computer-assisted graphic analysis applicable to generalized filament networks. This analysis yielded information concerning the frequency of filament intersections, the filament length between these intersections, the angle at which filaments branch at these intersections, and the concentration of filaments within a defined volume. Purified actin at a concentration of 1 mg/ml assembled into a uniform mass of long filaments which overlap at random angles between 0 degrees and 90 degrees. Actin in the presence of macrophage actin-binding protein assembled into short, straight filaments, organized in a perpendicular branching network. The distance between branch points was inversely related to the molar ratio of actin-binding protein to actin. This distance was what would be predicted if actin filaments grew at right angles off of nucleation sites on the two ends of actin-binding protein dimers, and then annealed. The results suggest that actin in combination with actin-binding protein self-assembles to form a three-dimensional network resembling the peripheral cytoskeleton of motile cells.

scholarly journals Bundling of actin filaments by alpha-actinin depends on its molecular length.

1990 ◽  
Vol 110 (6) ◽  
pp. 2013-2024 ◽  
Author(s):  
R K Meyer ◽  
U Aebi
Keyword(s):  
Smooth Muscle ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Binding ◽  
Molar Ratio ◽  
Cross Linking ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Chicken Gizzard ◽  
Molecular Length

Cross-linking of actin filaments (F-actin) into bundles and networks was investigated with three different isoforms of the dumbbell-shaped alpha-actinin homodimer under identical reaction conditions. These were isolated from chicken gizzard smooth muscle, Acanthamoeba, and Dictyostelium, respectively. Examination in the electron microscope revealed that each isoform was able to cross-link F-actin into networks. In addition, F-actin bundles were obtained with chicken gizzard and Acanthamoeba alpha-actinin, but not Dictyostelium alpha-actinin under conditions where actin by itself polymerized into disperse filaments. This F-actin bundle formation critically depended on the proper molar ratio of alpha-actinin to actin, and hence F-actin bundles immediately disappeared when free alpha-actinin was withdrawn from the surrounding medium. The apparent dissociation constants (Kds) at half-saturation of the actin binding sites were 0.4 microM at 22 degrees C and 1.2 microM at 37 degrees C for chicken gizzard, and 2.7 microM at 22 degrees C for both Acanthamoeba and Dictyostelium alpha-actinin. Chicken gizzard and Dictyostelium alpha-actinin predominantly cross-linked actin filaments in an antiparallel fashion, whereas Acanthamoeba alpha-actinin cross-linked actin filaments preferentially in a parallel fashion. The average molecular length of free alpha-actinin was 37 nm for glycerol-sprayed/rotary metal-shadowed and 35 nm for negatively stained chicken gizzard; 46 and 44 nm, respectively, for Acanthamoeba; and 34 and 31 nm, respectively, for Dictyostelium alpha-actinin. In negatively stained preparations we also evaluated the average molecular length of alpha-actinin when bound to actin filaments: 36 nm for chicken gizzard and 35 nm for Acanthamoeba alpha-actinin, a molecular length roughly coinciding with the crossover repeat of the two-stranded F-actin helix (i.e., 36 nm), but only 28 nm for Dictyostelium alpha-actinin. Furthermore, the minimal spacing between cross-linking alpha-actinin molecules along actin filaments was close to 36 nm for both smooth muscle and Acanthamoeba alpha-actinin, but only 31 nm for Dictyostelium alpha-actinin. This observation suggests that the molecular length of the alpha-actinin homodimer may determine its spacing along the actin filament, and hence F-actin bundle formation may require "tight" (i.e., one molecule after the other) and "untwisted" (i.e., the long axis of the molecule being parallel to the actin filament axis) packing of alpha-actinin molecules along the actin filaments.

scholarly journals Thrombin-induced GPIb-IX centralization on the platelet surface requires actin assembly and myosin II activation

Blood ◽  
1996 ◽  
Vol 87 (2) ◽  
pp. 618-629 ◽  
Author(s):  
TJ Kovacsovics ◽  
JH Hartwig
Keyword(s):  
Actin Filaments ◽  
Myosin Ii ◽  
Surface Expression ◽  
Membrane Skeleton ◽  
Cytosolic Calcium ◽  
Human Platelets ◽  
Actin Binding ◽  
Actin Assembly ◽  
Platelet Surface ◽  
Von Willebrand

In resting platelets, the GPIb-IX complex, the receptor for the von Willebrand factor (vWF), is linked to underlying actin filaments by actin-binding protein (ABP-280). Thrombin stimulation of human platelets leads to a decrease in the surface expression of the GPIb-IX complex, which is redistributed from the platelet surface into the open canalicular system (OCS). Because the centralization of GPIb-IX is inhibited by cytochalasin, it is believed to be linked to actin cytoskeletal rearrangements that take place during platelet activation. We have further characterized the mechanism of GPIb-IX centralization in platelets in suspension. Following thrombin stimulation, GPIb-IX shifts from the membrane skeleton of the resting cell to the cytoskeleton of the activated cell in a reaction sensitive to cytochalasin B. The cytoskeletal association of GPIb-IX involves ABP- 280, as it correlates with the incorporation of ABP-280 into the activated cytoskeleton and because no dissociation of the ABP-280/GPIb- IX complexes is detected after thrombin activation. However, the incorporation of GPIb-IX into the cytoskeleton is complete within 1 minute, whereas GPIb-IX centralization requires 5 to 10 minutes for completion. The movement of GPIb-IX to the cytoskeleton of activated platelets is therefore necessary, but not sufficient for GPIb-IX centralization. Blockage of cytosolic calcium increases induced by thrombin by loading with the cell permeant calcium chelator Quin-2 AM inhibited GPIb-IX centralization by 70%, but did not prevent its association with the activated cytoskeleton. Quin-2 loading did, however, decrease the incorporation of myosin II into the activated cytoskeleton. The role of myosin II was further probed using the myosin light chain kinase (MLCK) inhibitor wortmannin. Wortmannin prevents myosin II association to the activated cytoskeleton and inhibits GPIb- IX centralization by 50%, without affecting actin assembly or the association of GPIb-IX to the cytoskeleton. Only micromolar concentrations of wortmannin, high enough to inhibit MLCK, prevent GPIb- IX centralization. These results indicate that thrombin-induced GPIb-IX centralization requires a minimum of two steps, one associating GPIb-IX to the activated cytoskeleton and the second requiring myosin II activation. The involvement of myosin II implies that GPIb-IX/ABP-280 complexes, linked to actin filaments, are pulled into the cell center, and that platelets may exert contractile tension on vWF bound to its receptor.

scholarly journals Direct Visualization of Actin Filaments and Actin-Binding Proteins in Neuronal Cells

2020 ◽  
Vol 8 ◽  
Author(s):  
Minkyo Jung ◽  
Doory Kim ◽  
Ji Young Mun
Keyword(s):  
Electron Microscopy ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Binding Proteins ◽  
Light And Electron Microscopy ◽  
Super Resolution ◽  
Actin Binding ◽  
Direct Visualization ◽  
Actin Binding Proteins ◽  
Synapse Plasticity

Actin networks and actin-binding proteins (ABPs) are most abundant in the cytoskeleton of neurons. The function of ABPs in neurons is nucleation of actin polymerization, polymerization or depolymerization regulation, bundling of actin through crosslinking or stabilization, cargo movement along actin filaments, and anchoring of actin to other cellular components. In axons, ABP–actin interaction forms a dynamic, deep actin network, which regulates axon extension, guidance, axon branches, and synaptic structures. In dendrites, actin and ABPs are related to filopodia attenuation, spine formation, and synapse plasticity. ABP phosphorylation or mutation changes ABP–actin binding, which regulates axon or dendritic plasticity. In addition, hyperactive ABPs might also be expressed as aggregates of abnormal proteins in neurodegeneration. Those changes cause many neurological disorders. Here, we will review direct visualization of ABP and actin using various electron microscopy (EM) techniques, super resolution microscopy (SRM), and correlative light and electron microscopy (CLEM) with discussion of important ABPs in neuron.

scholarly journals The Huntingtin-interacting protein SETD2/HYPB is an actin lysine methyltransferase

2020 ◽  
Vol 6 (40) ◽  
pp. eabb7854 ◽  
Author(s):  
Riyad N. H. Seervai ◽  
Rahul K. Jangid ◽  
Menuka Karki ◽  
Durga Nand Tripathi ◽  
Sung Yun Jung ◽  
...  
Keyword(s):  
Cell Migration ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Scaffolding Protein ◽  
Actin Binding ◽  
Set Domain ◽  
Interacting Protein ◽  
Lysine Methyltransferase ◽  
Huntingtin Interacting Protein ◽  
In Cells

The methyltransferase SET domain–containing 2 (SETD2) was originally identified as Huntingtin (HTT) yeast partner B. However, a SETD2 function associated with the HTT scaffolding protein has not been elucidated, and no linkage between HTT and methylation has yet been uncovered. Here, we show that SETD2 is an actin methyltransferase that trimethylates lysine-68 (ActK68me3) in cells via its interaction with HTT and the actin-binding adapter HIP1R. ActK68me3 localizes primarily to the insoluble F-actin cytoskeleton in cells and regulates actin polymerization/depolymerization dynamics. Disruption of the SETD2-HTT-HIP1R axis inhibits actin methylation, causes defects in actin polymerization, and impairs cell migration. Together, these data identify SETD2 as a previously unknown HTT effector regulating methylation and polymerization of actin filaments and provide new avenues for understanding how defects in SETD2 and HTT drive disease via aberrant cytoskeletal methylation.

Sign in / Sign up

Export Citation Format

Share Document