Demonstration of TNSA proton radiography on the National Ignition Facility Advanced Radiographic Capability (NIF-ARC) laser

2021 ◽  
Vol 63 (12) ◽  
pp. 124006
Author(s):  
R A Simpson ◽  
D A Mariscal ◽  
J Kim ◽  
G G Scott ◽  
G J Williams ◽  
...  
Keyword(s):  
Short Pulse ◽  
Laser System ◽  
High Energy ◽  
High Energy Density ◽  
Proton Radiography ◽  
Short Pulse Laser ◽  
Key Characteristics ◽  
Wide Range ◽  
Proton Source ◽  
Laser Drivers

Abstract Proton radiography using short-pulse laser drivers is an important tool in high-energy density (HED) science for dynamically diagnosing key characteristics in plasma interactions. Here we detail the first demonstration of target-normal sheath acceleration (TNSA)-based proton radiography the NIF-ARC laser system aided by the use of compound parabolic concentrators (CPCs). The multi-kJ energies available at the NIF-ARC laser allows for a high-brightness proton source for radiography and thus enabling a wide range of applications in HED science. In this demonstration, proton radiography of a physics package was performed and this work details the spectral properties of the TNSA proton probe as well as description of the resulting radiography quality.

The OMEGA EP high-energy, short-pulse Laser System

2008 ◽  
Author(s):  
L. J. Waxer ◽  
M. J. Guardalben ◽  
J. H. Kelly ◽  
B. E. Kruschwitz ◽  
J. Qiao ◽  
...  
Keyword(s):  
Pulse Laser ◽  
Short Pulse ◽  
Laser System ◽  
High Energy ◽  
Short Pulse Laser

scholarly journals Development of the PETAL Laser Facility and its Diagnostic Tools

10.14311/1721 ◽  
2013 ◽  
Vol 53 (2) ◽  
Author(s):  
Dimitri Batani ◽  
Sebastien Hulin ◽  
Jean Eric Ducret ◽  
Emmanuel D’Humieres ◽  
Vladimir Tikhonchuk et al.
Keyword(s):  
Short Pulse ◽  
High Energy ◽  
High Energy Density ◽  
Diagnostic Tools ◽  
Performance Goal ◽  
X Ray ◽  
Secondary Sources ◽  
Short Pulse Laser ◽  
Laser Facility ◽  
Operational Phase

The PETAL system (PETawatt Aquitaine Laser) is a high-energy short-pulse laser, currently in an advanced construction phase, to be combined with the French Mega-Joule Laser (LMJ). In a first operational phase (beginning in 2015 and 2016) PETAL will provide 1 kJ in 1 ps and will be coupled to the first four LMJ quads. The ultimate performance goal to reach 7PW (3.5 kJ with 0.5 ps pulses). Once in operation, LMJ and PETAL will form a unique facility in Europe for High Energy Density Physics (HEDP). PETAL is aiming at providing secondary sources of particles and radiation to diagnose the HED plasmas generated by the LMJ beams. It also will be used to create HED states by short-pulse heating of matter. Petal+ is an auxiliary project addressed to design and build diagnostics for experiments with PETAL. Within this project, three types of diagnostics are planned: a proton spectrometer, an electronspectrometer and a large-range X-ray spectrometer.

The OMEGA EP High-Energy, Short-Pulse Laser System

2008 ◽  
Author(s):  
L. J. Waxer ◽  
J. H. Kelly ◽  
B. E. Kruschwitz ◽  
J. Qiao ◽  
M. J. Guardalben ◽  
...  
Keyword(s):  
Pulse Laser ◽  
Short Pulse ◽  
Laser System ◽  
High Energy ◽  
Short Pulse Laser

scholarly journals Recent laser upgrades at Sandia’s Z-backlighter facility in order to accommodate new requirements for magnetized liner inertial fusion on the Z-machine

2016 ◽  
Vol 4 ◽  
Author(s):  
Jens Schwarz ◽  
Patrick Rambo ◽  
Darrell Armstrong ◽  
Marius Schollmeier ◽  
Ian Smith ◽  
...  
Keyword(s):  
Adaptive Optics ◽  
Brillouin Scattering ◽  
Short Pulse ◽  
High Energy ◽  
Pulse Mode ◽  
High Energy Density ◽  
Inertial Fusion ◽  
Nanosecond Laser ◽  
Short Pulse Laser ◽  
Laser Systems

The Z-backlighter laser facility primarily consists of two high energy, high-power laser systems. Z-Beamlet laser (ZBL) (Rambo et al., Appl. Opt. 44, 2421 (2005)) is a multi-kJ-class, nanosecond laser operating at 1054 nm which is frequency doubled to 527 nm in order to provide x-ray backlighting of high energy density events on the Z-machine. Z-Petawatt (ZPW) (Schwarz et al., J. Phys.: Conf. Ser. 112, 032020 (2008)) is a petawatt-class system operating at 1054 nm delivering up to 500 J in 500 fs for backlighting and various short-pulse laser experiments (see also Figure 10 for a facility overview). With the development of the magnetized liner inertial fusion (MagLIF) concept on the Z-machine, the primary backlighting missions of ZBL and ZPW have been adjusted accordingly. As a result, we have focused our recent efforts on increasing the output energy of ZBL from 2 to 4 kJ at 527 nm by modifying the fiber front end to now include extra bandwidth (for stimulated Brillouin scattering suppression). The MagLIF concept requires a well-defined/behaved beam for interaction with the pressurized fuel. Hence we have made great efforts to implement an adaptive optics system on ZBL and have explored the use of phase plates. We are also exploring concepts to use ZPW as a backlighter for ZBL driven MagLIF experiments. Alternatively, ZPW could be used as an additional fusion fuel pre-heater or as a temporally flexible high energy pre-pulse. All of these concepts require the ability to operate the ZPW in a nanosecond long-pulse mode, in which the beam can co-propagate with ZBL. Some of the proposed modifications are complete and most of them are well on their way.

scholarly journals A quasi-monoenergetic short time duration compact proton source for probing high energy density states of matter

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
J. I. Apiñaniz ◽  
S. Malko ◽  
R. Fedosejevs ◽  
W. Cayzac ◽  
X. Vaisseau ◽  
...  
Keyword(s):  
Energy Density ◽  
Proton Beam ◽  
Dense Matter ◽  
High Energy ◽  
High Repetition Rate ◽  
High Energy Density ◽  
Time Duration ◽  
Ultrashort Pulse Laser ◽  
Proton Source ◽  
Short Time

AbstractWe report on the development of a highly directional, narrow energy band, short time duration proton beam operating at high repetition rate. The protons are generated with an ultrashort-pulse laser interacting with a solid target and converted to a pencil-like narrow-band beam using a compact magnet-based energy selector. We experimentally demonstrate the production of a proton beam with an energy of 500 keV and energy spread well below 10$$\% $$ % , and a pulse duration of 260 ps. The energy loss of this beam is measured in a 2 $$\upmu $$ μ m thick solid Mylar target and found to be in good agreement with the theoretical predictions. The short time duration of the proton pulse makes it particularly well suited for applications involving the probing of highly transient plasma states produced in laser-matter interaction experiments. This proton source is particularly relevant for measurements of the proton stopping power in high energy density plasmas and warm dense matter.

scholarly journals Machine learning for multi-dimensional optimisation and predictive visualisation of laser machining

2021 ◽  
Author(s):  
Michael D. T. McDonnell ◽  
Daniel Arnaldo ◽  
Etienne Pelletier ◽  
James A. Grant-Jacob ◽  
Matthew Praeger ◽  
...  
Keyword(s):  
Short Pulse ◽  
Surface Texturing ◽  
Laser Surface Texturing ◽  
Laser Machining ◽  
Laser Materials ◽  
Parameter Optimisation ◽  
Short Pulse Laser ◽  
Alternative Approach ◽  
Highly Nonlinear ◽  
Wide Range

AbstractInteractions between light and matter during short-pulse laser materials processing are highly nonlinear, and hence acutely sensitive to laser parameters such as the pulse energy, repetition rate, and number of pulses used. Due to this complexity, simulation approaches based on calculation of the underlying physical principles can often only provide a qualitative understanding of the inter-relationships between these parameters. An alternative approach such as parameter optimisation, often requires a systematic and hence time-consuming experimental exploration over the available parameter space. Here, we apply neural networks for parameter optimisation and for predictive visualisation of expected outcomes in laser surface texturing with blind vias for tribology control applications. Critically, this method greatly reduces the amount of experimental laser machining data that is needed and associated development time, without negatively impacting accuracy or performance. The techniques presented here could be applied in a wide range of fields and have the potential to significantly reduce the time, and the costs associated with laser process optimisation.

Temperature relaxation in strongly-coupled binary ionic mixtures

2021 ◽  
Author(s):  
Robert Sprenkle ◽  
Luciano Silvestri ◽  
M. S. Murillo ◽  
Scott Bergeson
Keyword(s):  
Material Properties ◽  
Inertial Confinement Fusion ◽  
Coulomb Systems ◽  
High Energy ◽  
High Energy Density ◽  
Inertial Confinement ◽  
Relaxation Rates ◽  
Strongly Coupled ◽  
Wide Range ◽  
Temperature Relaxation

Abstract New facilities such as the National Ignition Facility and the Linac Coherent Light Source have pushed the frontiers of high energy-density matter. These facilities offer unprecedented opportunities for exploring extreme states of matter, ranging from cryogenic solid-state systems to hot, dense plasmas, with applications to inertial-confinement fusion and astrophysics. However, significant gaps in our understanding of material properties in these rapidly evolving systems still persist. In particular, non-equilibrium transport properties of strongly-coupled Coulomb systems remain an open question. Here, we study ion-ion temperature relaxation in a binary mixture, exploiting a recently-developed dual-species ultracold neutral plasma. We compare measured relaxation rates with atomistic simulations and a range of popular theories. Our work validates the assumptions and capabilities of the simulations and invalidates theoretical models in this regime. This work illustrates an approach for precision determinations of detailed material properties in Coulomb mixtures across a wide range of conditions.

High-energy X-ray radiography of laser shock loaded metal dynamic fragmentation using high-intensity short-pulse laser

2018 ◽  
Vol 89 (11) ◽  
pp. 115106 ◽  
Author(s):  
Genbai Chu ◽  
Tao Xi ◽  
Minghai Yu ◽  
Wei Fan ◽  
Yongqiang Zhao ◽  
...  
Keyword(s):  
Pulse Laser ◽  
High Intensity ◽  
Short Pulse ◽  
High Energy ◽  
Laser Shock ◽  
X Ray ◽  
Dynamic Fragmentation ◽  
Short Pulse Laser

scholarly journals Metals and Alloys Additives as Enhancer for Rocket Propulsion: A Review

2021 ◽  
Vol 90 (1) ◽  
pp. 1-9
Author(s):  
Izham Izzat Ismail ◽  
Norhuda Hidayah Nordin ◽  
Muhammad Hanafi Azami ◽  
Nur Azam Abdullah
Keyword(s):  
Specific Impulse ◽  
Flame Temperature ◽  
High Energy ◽  
Combustion Efficiency ◽  
High Energy Density ◽  
Regression Rate ◽  
High Entropy ◽  
Rocket Propulsion ◽  
Wide Range ◽  
Metal Additives

A rocket's engine usually uses fuel and oxygen as propellants to increase the rocket's projection during launch. Nowadays, metallic ingredients are commonly used in the rocket’s operation to increase its performance. Metallic ingredients have a high energy density, flame temperature, and regression rate that are important factors in the propulsion process. There is a wide range of additives have been reported so far as catalysts for rocket propulsion. The studies show that the presence of metal additives improves the regression rate, specific impulse and combustion efficiency. Herein, the common energetic additives for rocket propulsion such as metal and light metals are reviewed. Besides the effect of these energetic particles on the regression behaviors of base (hybrid) fuel has been exclusively discussed. This paper also proposed a new alloy namely high entropy alloys (HEAs) as a new energetic additive that can potentially increase the performance of the rocket propellant system.

Sign in / Sign up

Export Citation Format

Share Document